Please wait a minute...
浙江大学学报(工学版)
JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE)  2018, Vol. 52 Issue (5): 864-872    DOI: 10.3785/j.issn.1008-973X.2018.05.006
Civil and Traffic Engineering     
Inversion algorithm for the geometric imperfection distribution of existing reticulated structures
WU Jun1, LUO Yong-feng1, WANG Lei2
1. Department of Structural Engineering, Tongji University, Shanghai 200092, China;
2. Tongen Civil Engineering Technology Consulting Co. Shanghai 200092, China
Download:   PDF(3707KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

A Markov Random Field (MRF) model of existing reticulated structures was proposed by leading into the probabilistic graph model in view of the fact that the traditional sampling method can hardly obtain the actual distribution of geometric imperfections of existing structures. The calculation unit of double-node and triple-node clique was proposed. The corresponding geometric state function was deducted based on the assumption of local Markov property. The inversion equation for the geometric imperfection distribution of existing reticulated structures were proposed by introducing the joint probability distribution function of MRF. Then, in order to determine the geometric imperfection distribution, the inversion iteration equation was deducted using iterative maximum likelihood method. An experimental model of K6 single-layer reticulated shell was designed to verify the inversion algorithm by calculating and comparing the mode of geometric imperfection distribution. When the ratio of the measured points is greater than 16.5%, the geometric imperfection mode from the inversion calculation has good similarity with the actual mode. The results can even identify the abnormal values of the measured points.

Received: 04 May 2017      Published: 07 November 2018
CLC:  TU393.3  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

WU Jun, LUO Yong-feng, WANG Lei. Inversion algorithm for the geometric imperfection distribution of existing reticulated structures. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2018, 52(5): 864-872.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2018.05.006     OR     http://www.zjujournals.com/eng/Y2018/V52/I5/864


既有网壳结构几何缺陷分布反演算法

针对目前传统的抽样检测手段无法获得既有结构真实几何缺陷分布的问题，提出基于概率图模型的既有网壳结构的马尔可夫随机场理论模型.基于局部马尔可夫性的计算假定，提出网壳结构双节点团和三节点团的计算单元，推导出相应的几何状态函数表达式；引入马尔可夫随机场的联合概率分布函数，推导既有网壳结构几何缺陷分布的反演方程，利用迭代-极大似然方程推导出计算几何缺陷分布的反演迭代方程.设计制作了一个K6单层球面网壳试验模型，采用本文反演算法对该试验模型的几何缺陷分布模态进行交叉验证.分析表明，当已知测点数占比大于16.5%时，反演计算得到的结构几何缺陷模态与实际模态具有较好的相似度；当节点几何缺陷的实测值出现异常时，反演计算结果可识别异常区域.

[1] BORRI C, SPINELLI P. Buckling and post-buckling behaviour of single layer reticulated shells affected by random imperfections[J]. Computers & Structures, 1988, 30(4):937-943.
[2] 罗永峰.建筑钢结构稳定理论与应用[M].北京:人民交通出版社,2010:48-54.
[3] GIONCU V. Buckling of reticulated shells:State-of-the-art[J]. International Journal of Space Structures, 1995, 10(1):1-46.
[4] YAMADA S, TAKEUCHI A, TADA Y, et al. Imperfection-sensitive overall buckling of single-layer lattice domes[J]. Journal of Engineering Mechanics, 2001, 127(4):382-386.
[5] ELISHAKOFF I. Uncertain buckling:its past, present and future[J]. International Journal of Solids & Structures, 2000, 37(46):6869-6889.
[6] FAN F, CAO Z, SHEN S. Elasto-plastic stability of single-layer reticulated shells[J]. Thin-Walled Structures, 2010, 48(10):827-836.
[7] FAN F, YAN J, CAO Z. Stability of reticulated shells considering member buckling[J]. Journal of Constructional Steel Research, 2012, 77(10):32-42.
[8] FAN F, YAN J, CAO Z. Elasto-plastic stability of single-layer reticulated domes with initial curvature of members[J]. Thin-Walled Structures, 2012, 48(10/11):827-836.
[9] BRUNO L, SASSONE M, VENUTI F. Effects of the Equivalent geometric nodal Imperfections on the stability of single layer grid shells[J]. Engineering Structures, 2016, 112:184-199.
[10] CHEN G, ZHANG H, RASMUSSEN K J R, et al. Modeling geometric imperfections for reticulated shell structures using random field theory[J]. Engineering Structures, 2016, 126:481-489.
[11] PEEK R. Worst shapes of imperfections for space trusses with multiple global and local buckling modes[J]. International Journal of Solids & Structures, 1993, 30(16):2243-2260.
[12] CHEN X, SHEN S Z. Complete load-deflection response and initial imperfection analysis of single-layer lattice dome[J]. International Journal of Space Structures, 1993, 8(4):271-278.
[13] 蔡健, 贺盛, 姜正荣,等. 单层网壳结构稳定性分析方法研究[J]. 工程力学, 2015, 32(7):103-110. CAI Jian, HE Sheng, JIANG Zheng-Rong, et al. Investigation on stability analysis method of single layer latticed shells[J]. Engineering Mechanics, 2015, 32(7):103-110.
[14] 刘慧娟,罗永峰,杨绿峰,等.单层网壳结构稳定性分析的随机缺陷模态迭加法[J].同济大学学报:自然科学版,2012,40(9):1294-1299. LIU Hui-juan, LUO Yong-feng, YANG Lv-feng, et al. Stochastic imperfection mode superposition method for stability analysis of single-layer lattice domes[J]. Journal of Tongji University:Natural Science, 2012, 40(9):1294-1299.
[15] KIYOHIRO I, KAZUO M. Statistics of normally distributed initial imperfections[J]. International Journal of Solids & Structures, 1993, 30(18):2445-2467.
[16] 罗永峰.国家标准《高耸与复杂钢结构检测与鉴定技术标准》编制简介[J].钢结构,2014,29(4):44-49. LUO Yong-feng. Brief introduction of composition of technical standard for inspection and appraisal of high-rising and complex steel structures[J]. Steel Construction, 2014, 29(4):44-49.
[17] 罗立胜,罗永峰,郭小农.考虑节点几何位置偏差的既有网壳结构稳定计算方法[J].湖南大学学报:自科版,2013,40(3):26-30. LUO Li-Sheng, LUO Yong-Feng, GUO Xiao-Nong. Overall stability of existing reticulated shells considering the effect of geometric position deviation of joints[J]. Journal of Hunan University:Natural Sciences, 2013, 40(3):26-30.
[18] KOLLER D, Friedman N. Probabilistic graphical models:principles and techniques[M]. Massachusetts:MIT press, 2009:3-5.
[19] GEMAN S, GEMAN D. Stochastic relaxation, Gibbs distributions, and the Bayesian restoration of images[J]. IEEE Transactions on Pattern Analysis and Machine intelligence, 1984(6):721-741.
[20] FRANK O, STRAUSS D, Markow graphs. Journal of the American Statistical Association, 1986, 81(395):832-842.
[21] JGJ 7-2010. 空间网格结构技术规程[S].北京:中国建筑工业出版社, 2011. JGJ 7-2010. Technical specification for space frame structures[S]. Beijing:China Architecture Industry Press, 2011.
[22] BOX G E P, MULLER M E. A note on the generation of random normal deviates[J]. Annals of Mathematical Statistics, 1958, 29(2):610-611.
[1] ZHOU Ze-sheng, DENG Hua, LIU Cheng-bin. Influence of roof panels with rock wool core on wind-induced vibration responses of roof structure[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(11): 2101-2111.
[2] ZHU Zhao-chen, XIANG Yang, LUO Yong-feng. Characteristic stiffness method for static stability analysis and assessment of spatial structure[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(11): 2112-2120.