Please wait a minute...
JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE)
Mechanical and Energy Engineering     
4 t/h coal-fired industrial chain boiler model and simulation adjustment
HONG Qiao qiao, MA Shun, ZHAO Hui, WU Xue cheng
1.State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou 310027, China;
2. Hangzhou Special Equipment Inspection Institute, Hangzhou 310000, China
Download:   PDF(1338KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

A chain boiler simulation software was developed with VC platform in order to choose the best adjust way to achieve efficient and safe operation of chain boiler under different working conditions. Focused on a 4 t/h coal-fired industrial chain boiler, mathematical models were established based on the mass conservation law, the energy conservation law and the heat transmission theory. The models consisted of 11 submodels, such as coal model, combustion model and furnace smoke temperature model. The models were used to analyze the operation parameters of chain boiler under typical working conditions. Results generally coincided with the data obtained by chain boiler thermodynamic calculation. Various boiler adjustment methods were forecasted after the changes of loads, coal types and air supply methods. As a result, the optimal adjustment method agrees well with the experience results. This software has been successfully applied in simulation platform as a demonstration, and it also can be used to guide, train and inspect the energy-saving operation of stoker personnels.



Published: 08 December 2016
CLC:  TK 22  
Cite this article:

HONG Qiao qiao, MA Shun, ZHAO Hui, WU Xue cheng. 4 t/h coal-fired industrial chain boiler model and simulation adjustment. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(12): 2312-2318.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2016.12.010     OR     http://www.zjujournals.com/eng/Y2016/V50/I12/2312


4 t/h燃煤工业链条炉模型及仿真调节

为了选择最优的调节方式,实现链条炉在变工况条件下的高效、安全运行,开发VC平台链条炉仿真软件.以4 t/h燃煤工业链条炉为研究对象,基于能量、质量守恒定律和传热理论建立数学模型,包括煤种模型、燃烧模型以及炉膛烟温模型等11个子模型.利用模型分析典型工况条件下链条炉的运行参数,模拟结果与链条炉热力计算得到的数据基本吻合.预测负荷、煤种以及送风方式变化后锅炉的各种调节方式,得出的最优调节方式与经验结果一致.该软件已成功在仿真平台上实现示范应用,可以用于指导、培训和考察司炉人员的节能操作.

[1] 黄浩云,姚立英.锅炉大气污染物排放标准(征求意见稿)编制说明[G].《锅炉大气污染物排放标准》编制组,2013:  12.
[2] 毛玉如,左永凌,纪秀平,等.链条炉的有效改造[J]. 锅炉制造,2001,(1): 43-44.
MAO Yuru, ZUO Yongling, JI Xiuping, et al. Efficacious retrofit of chaingrate boiler [J]. Boiler Manufacturing, 2001,(1): 43-44.
[3] 安岩. 链条炉飞灰炉内复燃数值模拟[D].辽宁:大连理工大学, 2012:  37.
AN Yan. Numerical modeling of fly ash reburning in travelling grate boilers [D].Liaoning: Dalian University of Technology, 2012:  37.
[4] 陈明琪.一起典型燃煤链条炉排锅炉的节能改造浅析[J].中国化工装备, 2012, 14(5): 35-38.
CHEN Mingqi. Energysaving modification and analysis for a typical Chaingrate boiler [J]. China Chemical Industry Equipment, 2012, 14(5): 3538.
[5] 李俊东,韩殿营,李耀荣,等.在用燃煤链条炉排锅炉的节能改造[J].工业锅炉, 2010,(2): 20-24.
LI Jundong, HAN Dianying, LI Yaorong, et al. Energysaving renovation of coalfired boilers with Chain grates in use [J]. Industrial Boiler, 2010, (2): 2024.
[6] THAI S M, WILCOX S J, CHONG A Z S, et al. Development of fuzzy based methodology to commission cocombustion of unprepared biomass on chain grate stoker fired boilers [J]. Journal of the Energy Institute, 2011, 84(3): 123-131.
[7] 何心良.我国工业锅炉使用现状与节能减排对策探讨[J].工业锅炉, 2010,(3): 18.
HE Xinliang. The present situations of IB in use and strategy of energyconservation and emissionreduction in China [J]. Industrial Boiler, 2010, (3): 18.
[8] 赵钦新.工业锅炉安全经济运行[M].北京:中国标准出版社,2003:  2.
[9] 赵钦新,王善武.我国工业锅炉未来发展分析 [J].工业锅炉, 2007,101(1): 19.
ZHAO Qinxin, WANG Shanwu. Developing analysis for China’s industrial boiler future [J]. Industrial Boiler, 2007, 101(1): 19.
[10] 张品,杜海亮,王苑,等.基于床层下降的链条炉数值模型与计算[J].热能动力工程, 2012,27(3): 324-328.
ZHANG Pin,DU Hailiang,WANG Yuan, et al. Numerical model and calculation of a chaingrate stoker based on a descending of the bed [J]. Journal of Engineering for Thermal Energy and Power, 2012, 27(3): 324328.
[11] 王善武.我国工业锅炉节能潜力分析与建议[J].工业锅炉,2005,(1): 1-16.
WANG Shanwu. Potential analysis of China IB industry’s energysaving and some suggestions [J]. Industrial Boiler, 2005, (1): 116.
[12] 赵钦新,周屈兰.工业锅炉节能减排现状存在问题及对策[J].工业锅炉,2010,1(119): 16.
ZHAO Qinxin, ZHOU Qulan. Solutions, questions and status of China’s industrial boiler [J]. Industrial Boiler, 2010, 1(119): 16.
[13] 王松岩.浅谈工业锅炉系统的节能降耗[J].价值工程,2010,29(033): 272-272.
WANG Songyan. Discussion on energy efficiency of industrial boiler system [J].Value Engineering, 2010, 29(033): 272-272.
[14] 杨宏生,索沂生,程芳真,等.工业链条炉数学建模及动态仿真[J].电站系统工程,2005,21(4): 29-31.
YANG Hongsheng, SUO Yisheng, CHENG Fangzhen, et al. Modeling and dynamic simulation for industrial chain boiler [J]. Power System Engineering, 2005, 21(4): 2931.
[15] 季俊杰. 燃煤链条锅炉燃烧的数值建模及配风与炉拱的优化设计 [D]. 上海:上海交通大学, 2008:  23-52.
JI Junjie. Numerical modeling of the combustion in Coalfired travelling grate boilers and the optimization of arch and air distribution [D]. Shanghai: Shanghai Jiao Tong University, 2008:  23-52.
[16] 李之光,范柏璋.工业锅炉手册[M].天津:天津科学技术出版社,1988:  3.
[17] 孙广能.工业锅炉实用手册[M].江苏:江苏科学技术出版社,1991: 715-718.
[18] 林宗虎,徐通模.实用锅炉手册[M].北京:化学工业出版社,2009:  8.
[19] 钱宇. 燃蒸联合循环中余热锅炉建模与仿真[D]. 上海:上海交通大学,2007:  21-43.
QIAN YU. Modeling and simulation of the heat recovery steam generator in a gassteam combined cycle [D]. Shanghai: Shanghai Jiao Tong University, 2007:  21-43.
[20] 李向荣.保持链条锅炉良好燃烧的方式和途径[J].科技创新与生产力,2013,(12): 74-76.
LI Xiangrong. Methods of keeping good combustion of stokerfeed boiler [J]. Science Technology innovation and Productivity, 2013,(12): 74-76.
[21] 黄家瑶,谢智明.无烟煤特性和无烟煤链条炉的燃烧调整与操作[J].机电技术,2009,32(B10): 136-143.
HUANG Jiayao, XIE Zhiming. Character of the anthracite and combustion adjustment and the operation of the chain boiler [J]. Mechanical and Electrical Technology, 2009, 32(B10): 136-143.

[1] YOU Hai-hui, MA Zeng-yi, TANG Yi-jun, WANG Yue-lan, ZHENG Lin, YU Zhong, JI Cheng-jun. Soft measurement of heating value of burning municipal solid waste for circulating fluidized bed[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(6): 1163-1172.
[2] LIU Rui-mei, LIU Yu-kun, WANG Zhi-hua, LIU Ying-zu, HU Li-hua, SHAO Zhe-ru, CEN Ke-fa. CFD simulation and optimization of secondary air distribution for waste combustion in grate furnace[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(3): 500-507.
[3] ZHONG Wei, PENG Liang, ZHOU Yong gang, XU Jian, CONG Fei yun. Slagging diagnosis of boiler based on wavelet packet analysis and support vector machine[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(8): 1499-1506.
[4] LIU Zi hao, ZHOU Hao, ZHOU Ming xi, CHENG Ming, LIU Rui peng, CEN Ke fa. Influence of coke size on combustion zone distribution in sintering bed[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(4): 691-697.
[5] ZHOU Yong gang, LI Pei, AO Xiang, ZHAO Hong. High temperature corrosion inhibition for opposed firing boiler based on combustion distribution evenness[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(9): 1768-1775.
[6] QIN Ya-nan, YANG Yu, SHI Wei, MA Wei-chen, ZHOU Hao, CEN Ke-fa. Uniform distribution characteristics of reducing agent on hybrid SNCR-SCR process[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(7): 1255-1261.
[7] DONG Kang, ZHOU Hao, YANG Yu, WANG Ling-li, CEN Ke-fa. Influence of mass flow rate of secondary air on gas/solid flow characteristics of a swirl burner[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(12): 2162-2171.
[8] YOU Zhuo, WANG Zhi-hua, ZHOU Zhi-jun, HU Xin, ZHU Yan-qun, ZHOU Jun-hu, CEN Ke-fa. Numerical simulation of NOx emission from a 1 000 MW boiler retrofitted to oxy-fuel combustion[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(11): 2080-2086.
[9] YOU Zhuo, WANG Zhi-hua, ZHOU Zhi-jun, HU Xin, ZHU Yan-qun, ZHOU Jun-hu, CEN Ke-fa. Numerical simulation of NOx emission from a 1 000 MW boiler retrofitted to oxy-fuel combustion[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 0, (): 2080-2086.
[10] XU Pei-pei, LIU Jian-zhong, LEI Qi, XIANG Yi, ZHOU Jun-hu, CEN Ke-fa.
Experimental research on thermal performance of cavity receiver of solar thermal power tower plant
[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(10): 1721-1726.
[11] WEN Zhi-yong, HU Min, YANG Yu, MO Gui-yuan, CEN Ke-fa. Application of air staging combined with SNCR on 300 MW boiler[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(1): 63-69.
[12] ZHONG Wei,YANG Zhi-qun,SONG Dong-gen,HU Ji-guang ,TONG Shui-guang. Hydrodynamic performance design of the radiation chamber of a waste-heat boiler for copper flash smelting[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2013, 47(11): 1970-1975.
[13] SHEN Yue-liang,ZHOU Hao, HU Min2, YANG Yu,WU Jian-bo, CEN Ke-fa. Application of electrostatic grid system in measuring flow characteristics of a swirl burner[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2013, 47(9): 1658-1665.
[14] WANG Xing-hao, WANG Zhi-hua, LIU Jing, XIANG Fei-peng,ZHOU Jun-hu, CEN Ke-fa. Reduction roasting and magnetic separation of oolitic hematite ore by coal combustion in fluidized bed[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2013, 47(4): 675-679.
[15] ZHANG Yun-qing, LI Xiao-dong, DU Chang-ming, SUN Xiao-ming, REN Yong, YAN Ji. Analysis of electical parameter and image of rotary gliding arc driven by magnetic field[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2013, 47(4): 687-691.