Please wait a minute...
浙江大学学报(工学版)
J4  2009, Vol. 43 Issue (12): 2293-2299    DOI: 10.3785/j.issn.1008-973X.2009.12.029
    
Research and implementation of quality control oriented to mass customization
XU Jing1,2, QI Guo-ning1, YANG Qing-hai3, GU Xin-jian1, LIU Xi-ze1
(1. Institute of Contemporary Manufacturing Engineering, Zhejiang University, Hangzhou 310027, China;
2. College of Engineering, Jiangxi Agricultural University, Nanchang 330045, China;
3. China National Institute of Standardization, Beijing 100088, China)
Download:   PDF(1759KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

The architecture of quality control oriented to mass customization (MC) was proposed in order to meet the new requirements of MC. Focusing on quality characteristics, the transition between custom requirements and quality characteristics reflection on the demand of design and manufacturing was described in detail. The optimal quality characteristics were obtained according to evaluation indexes and evaluated whether the maximum customer satisfaction was achieved. The continuous quality improvement was conducted by using the statistical process adjustment (SPA) as the method of quality control oriented to MC. The quality control system was developed by Genexus, and the application of it indicates that the method can provide the personalized customization products and services with high quality, low cost and short due date, and meet the customer satisfaction to a greatest extent.

Published: 16 January 2010
CLC:  TP 273.2  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

HU Jing, QI Guo-Ning, YANG Jing-Hai, et al. Research and implementation of quality control oriented to mass customization. J4, 2009, 43(12): 2293-2299.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2009.12.029     OR     http://www.zjujournals.com/eng/Y2009/V43/I12/2293


面向大批量定制的质量控制研究与实现

针对大批量定制生产模式对质量控制的新要求,提出了面向大批量定制的质量控制体系结构.以质量特性为中心,论述了从客户需求到反映设计制造需求的质量特性的转换过程,给出了质量评价指标和评价方法,根据评价指标获得最优质量特性,并评价其是否达到最大客户满意度；采用了统计过程调整（SPA）作为面向大批量定制质量控制的方法,进行持续质量改进；结合某制造企业生产实际,运用Genexus开发工具编制了一套面向大批量定制企业的质量控制系统,实际应用表明,该方法可有效地以高质量、低成本、短交货期向客户提供个性化的定制产品和服务,最大程度地满足了客户的需求.


[1] 祁国宁,顾新建,谭建荣. 大批量定制技术及其应用
[M]. 北京: 机械工业出版社, 2003.

[2] SILVEIRA G D, BORENSTEIN D, FOGLIATTO F S. Mass customization: Literature review and research directions
[J]. International Journal of Production Economics, 2001, 72: 1-13.

[3] MONTGOMERY D C. Introduction to statistical quality control
[M]. 3rd ed. New York: Wiley, 1996.

[4] CHEN K S,HSU C H,WU C C. Process capability analysis for a multi-process product
[J]. The Internat-ional Journal of Advanced Manufacturing, 2006, 127(8): 679-687.

[5] 余忠华,吴昭同. 面向多品种、小批量制造环境的SPC 实施模型的研究
[J]. 工程设计,2000(3): 21-31.
YU Zhong-hua, WU Zhao-tong. Study on an application model of SPC in multi-specification & small-batch production
[J]. Engineering Design, 2000(3):21-31.

[6] YANG J H, YANG M S. A control chart pattern recognition system using a statistical correlation coefficient method
[J]. Computers and Industrial Engineering, 2005, 48(2): 205-221.

[7] 王雪聪,唐晓青. 基于产品平台技术的大规模定制质量保证研究
[J].北京航空航天大学学报,2004,30(5):469-474.
WANG Xue-cong, TANG Xiao-qing. Research on product platform based quality assurance in mass customization
[J]. Journal of Beijing University of Aeronautics and Astronautics, 2004, 30(5):469-474.

[8] 唐晓青,王雪聪. 以顾客满意为中心的大规模定制质量改进
[J].机械工程学报,2005,41(5):200-204.
TANG Xiao-qing, WANG Xue-cong. Customer-oriented quality improvement in mass customization
[J]. Chinese Journal of Mechanical Engineering, 2005,41(5):200-204.

[9] 温明振,赵黎明,张敏. 面向大批量定制生产模式的质量控制
[J].组合机床与自动化加工技术,2006(2):110-112.
WEN Ming-zhen, ZHAO Li-ming, ZHANG Min. Quality control for mass customization
[J]. Modular Machine Tool and Automatic Marnufacturing Technique, 2006 (2):110-112.

[10] REID R D. Characteristic management
[J]. Quality Progress, 2003, 36(11): 71-73.

[11] 何益海,唐晓青. 基于关键质量特性的产品保质设计
[J]. 航空学报,2007, 28(6): 1468-1481.
HE Yi-hai, TANG Xiao-qing. Design for quality based on product key quality characteristics
[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(6): 1468-1481.

[12] 王云霞. 基于Internet及MC的客户驱动定制产品设计技术研究与应用
[D]. 南京: 东南大学, 2005.
WANG Yun-xia. Internet-based customer-driven product design for mass customization
[D].Nanjing: Southeast University, 2005.

[13] 王雪聪,唐晓青. 质量管理中的顾客满意度研究
[J]. 计算机集成制造系统,2001,7(10):6164.
WANG Xue-cong, TANG Xiao-qing. Research on customer satisfaction in quality management
[J]. Computer Integrated Manufacturing Systems, 2001,7(10):61-64.
No related articles found!