Please wait a minute...
浙江大学学报(工学版)
JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE)
Mechanical and Energy Engineering     
Numerical simulation of erosion wear of pre stage of jet pipe servo valve
YIN Yao bao1, FU Jia hua1, JIN Yao lan2
1. College of Mechanical Engineering, Tongji University, Shanghai 200092, China; 2. Shanghai Hunter Hydraulic Control Technology Limited Company, Shanghai 200031, China
Download:   PDF(2667KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

Numerical simulation of erosion wear was taken aiming at the problem of the low requirements on oil liquid cleanliness of jet pipe servo valve and that the high speed jet of solid particles in the oil can easily lead to parts erosion. The mathematical model of erosion wear was established by using computational fluid dynamics (CFD) and erosion theory. The motion trajectory of solid particles in the multiphase oil of jet pipe servo valve was simulated, and the effect rule of the velocity and impact angle of the discrete phase solid particles on erosion of jet pipe servo valve were obtained. The erosion rate and quantity of the pre stage of jet pipe servo valve were analyzed when the working oil was grade 7 pollution. The type of CSDY jet pipe servo valve, which was served in an industrial scene for 5 years, was used as the experimental object. The experimental results and the theoretical results were compared and analyzed. Results show that high speed jet flow can easily cause the parts of jet pipe servo valve weight gain or loss. The particle in the oil cause a serious erosion wear on the wedge of receiver, and the erosion amount is related to the angle between the two receiving holes and the displacement of the jet pipe. When the angle was 40° to 50°, the erosion wear was relatively serious. As the jet pipe was in medium position, that was, the displacement of the jet pipe was zero, serious erosion also happened around the wedge of receiver. When the jet pipe’s displacement was maximum, the minimum erosion happened in the wedge of receiver. As a result, the theoretical results were in agreement with the experimental results.

Published: 31 December 2015
CLC:  TH 137.52  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

YIN Yao bao, FU Jia hua, JIN Yao lan. Numerical simulation of erosion wear of pre stage of jet pipe servo valve. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(12): 2252-2260.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2015.12.003     OR     http://www.zjujournals.com/eng/Y2015/V49/I12/2252


射流管伺服阀前置级冲蚀磨损数值模拟

针对射流管伺服阀对油液清洁度要求低以及油液中固体颗粒物高速射流容易产生零件磨损的问题,进行冲蚀磨损数值模拟.采用计算流体动力学（CFD）与冲蚀理论,建立冲蚀磨损数学模型,模拟射流管伺服阀多相流中油液和固体颗粒物的运动轨迹.分析离散相固体颗粒的速度和冲击角度等参数对射流管伺服阀冲蚀磨损的影响规律,得到在工作介质为7级清洁度时射流管伺服阀前置级部件的冲蚀磨损率以及冲蚀磨损量.以某工业现场已服役5年的CSDY型射流管伺服阀作为实验对象,进行实验结果和理论结果的对比分析. 研究结果表明：高速射流容易导致射流管伺服阀部件出现增重或失重的现象；油液中的固体颗粒物使接受器劈尖产生较严重的冲蚀磨损,冲蚀磨损量与2个接收孔之间的夹角及射流管位移量有关,当夹角为40°～50°时,冲蚀磨损相对较为严重.当射流管处于中立位置时,即射流管位移量为零时,劈尖附近冲蚀磨损严重；当射流管位移为最大时,劈尖的冲蚀磨损最小,理论结果与实验结果一致.

［1］ 訚耀保.极端环境下的电液伺服控制理论及应用技术［M］.上海：上海科学技术出版社,2012：13-23.
［2］ AZIMIAN M, BART H J. Erosion investigations by means of a centrifugal accelerator erosion tester ［J］. Wear, 2015, 329: 249-256.
［3］ AUNG N Z, LI S J. A numerical study of cavitation phenomenon in a flapper nozzle pilot stage of an electrohydraulic servo valve with an innovative flapper shape ［J］. Energy Conversion and Management, 2013, 77(1): 31-39.
［4］ FINNIE I. Erosion of surfaces by solid particles ［J］. Wear, 1960, 3: 87-103.
［5］ TILLY G P. A two stage mechanism of ductile erosion ［J］. Wear, 1973, 23: 87-96.
［6］ HUNTCHINGS I M, WINTER R E. Particle erosion of ductile metals: A mechanism of material removal ［J］.Wear, 1974, 27：121-128.
［7］ OKITA R, ZHANG Y L, MCLAURY B S, et al. Experimental and computational investigations to evaluate the effects of fluid viscosity and particle size on erosiondamage ［J］. Journal of Fluids Engineering, 2012,134(6): 1-13.
［8］ DIVAKAR M, AGARWAL V K, SINGH S N. Effect of the material surface hardness on the erosion of AISI316 ［J］. Wear, 2005, 259：110-117.
［9］ TAKAFFOLI M, PAPINI M. Finite element analysis of single impacts of angular particles on ductile targets ［J］. Wear, 2009, 267：144-151.
［10］ DESALE G R, PAUL C P, GANDHIBK, et al. Erosion wear behavior of laser clad surfaces of low carbon austenitic steel ［J］. Wear, 2009, 266: 975-987.
［11］ AKBARZADEH E, ELSAADAWY E, SHERIK A M, et al. The solid particle erosion of 12 metals using magnetite erodent ［J］. Wear, 2012, 283: 40-51.
［12］ ZHANG Y, REUTERFORS E P, MCLAURY B S. Comparison of computed and measured particle velocities and erosion in water and air flows ［J］. Wear, 2007, 263: 330-338.
［13］ FRAWLEY P, CORISH J, NIVEN A. Combination of CFD and DOE to analyses solid particle erosion in elbows ［J］. International Journal of Computational Fluid Dynamics, 2009, 23(5):411-426.
［14］ ALFONSO C A. Numerical investigation of the solid particle erosion rate in a steam turbine nozzle ［J］. Applied Thermal Engineering, 2007, 27：2393-2403.
［15］ MAZUR Z, AMWACUA R C, BELTRAN G U. Numerical 3D simulation of the erosion due to solid particle impact in the main stop valve of a steam turbine ［J］. Applied Thermal Engineering, 2004, 24：1877-1891.
［16］ ZHANG K, YAO J Y. Degradation behavior analysis of electro hydraulic servo valve under erosion wear［C］ ∥ 2013 IEEE International Conference on Prognostics and Health Management. Milan: IEEE, 2013：1-7.
［17］ 褚渊博,袁朝辉,张颖.射流管式伺服阀冲蚀磨损特性研究［J］.航空学报,2014,36(5):1548-1555.
CHU Yuan bo, YUAN Chao hui, ZHANG Ying. The erosion wear characters of the jet pipe servo valve ［J］. Acta Aernautica et Astronautica Sinica, 2014, 36(5): 1548-1555.
［18］ ANSYS FLUENT Theory Guide ［M］. Canonsburg：ANSYS, Incorporated, 2011.
［19］ FORDER A, THEW M, HARRISON D. A numerical investigation of solid particle erosion experienced within oilfield control valves ［J］. Wear, 1988, 216： 184-193.
［20］ PETERS A, SAGAR H, LANTERMANN U, et al. Numerical modelling and prediction of cavitation erosion ［J］. Wear, 2015, 339: 189-201.
[1] ZHOU Feng, GU Lin yi, LUO Gao sheng. Stability of  pilot operated proportional pressure reducing valve used in underwater propulsion system[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(11): 2047-2053.
[2] KONG Xiao-wu, FANG Jin-hui, PU Zeng-kun. Compatibility design of active proportional cartridge valve with system conditions[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(1): 15-20.
[3] ZHANG Zeng-meng, ZHOU Hua, CHEN Ying-long, GAO Yuan-an. Research on control characteristic and compensation of
water hydraulic proportional pressure relief valve[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2010, 44(11): 2093-2099.