Please wait a minute...
浙江大学学报(工学版)
J4  2010, Vol. 44 Issue (11): 2083-2087    DOI: 10.3785/j.issn.1008973X.2010.11.007
    
Research on plasticity modification of strain relief
coefficients in Q235 steel
SHI Yan-bin, HE Wen, ZHENG Jian-yi
State Key Laboratory of Fluid Power Transmission and Control,Zhejiang Province Key Laboratory of Advanced
Manufacturing Technology,Institute of Manufacturing Engineering,Zhejiang University,Hangzhou 310027,China
Download:   PDF(0KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

 Considering that measuring errors caused by the plasticity effect when measuring high residual stresses in Q235 steel, the plasticity modification of the strain relief coefficients was investigated. After analyzing the calibration of the strain relief coefficients and the constitutive model of Q235 steel, the strain relief coefficients in the elasticity and the plasticity conditions were calculated based on the finite element analysis (FEA). And the conclusion was obtained that the strain relief coefficients in the plasticity condition should be modified. Then a modification formula was presented based on the parameter S. It was used for modifying the measuring errors of plasticity deformation due to high residual stress, and applied to measure high residual stress in the welding specimen. The results show that the solutions of FEA calculation exactly agree with the experimental results in the elasticity condition and the modification formula has better modifying effects for measuring high residual stresses in the plasticity condition. Therefore, the application of instruments for measuring residual stress based on the blind-hole method is extended.

Published: 23 December 2010
CLC:  O 348  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

SHI Yan-bin, HE Wen, ZHENG Jian-yi. Research on plasticity modification of strain relief
coefficients in Q235 steel. J4, 2010, 44(11): 2083-2087.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008973X.2010.11.007     OR     http://www.zjujournals.com/eng/Y2010/V44/I11/2083


Q235钢应变释放系数塑性修正问题的研究

针对盲孔法测量高残余应力时因塑性效应引入的测量误差问题,对Q235钢应变释放系数的塑性修正问题进行研究.通过分析应变释放系数标定的原理及Q235钢的本构关系模型,采用有限元法仿真计算Q235钢在弹性阶段和塑性阶段的应变释放系数,指出塑性阶段的应变释放系数需要修正；给出基于参量S的修正公式,用于修正高残余应力引起的测量误差,并应用于高残余应力焊接件的测量试验中.结果表明,在弹性阶段,有限元仿真计算与实验结果一致性较好；在塑性阶段,给出的修正公式对于高残余应力的测量有着较好的修正效果,从而拓展盲孔法残余应力测量装置的应用范围.

［1］ MATHAR J.Determination of initial stresses by measuring the deformations around drilled holes ［J］.Transactions of ASME,1934,56（4）：249-254．
［2］ NIKULARI A,LU J,FLAVENOT J F.Measurement of residualstress distribution by the incremental holedrilling method ［J］.Journal of Mechanical Working Technology,1985,11（2）：167-188．
［3］ 欧阳宇平,王世中.钻孔法测量残余应力附加应变的研究（Ⅱ）［J］.实验力学,1991,6（1）：34-41．
OUYANG Yuping,WANG Shizhong.Strains induced by hole drilling method for residua1 stresses measurement ［J］.Journal of Experimental Mechanics,1991,6（1）：34-41．
［4］ 杨伯源.钻孔偏心下的应变释放系数及残余应力［J］.实验力学,1990,5（3）：329-335．
YANG Boyuan.Relievedstrain coefficients and residualstresses resulted from blindhole method with offcenter hole ［J］.Journal of Experimental Mechanics,1990,5（3）：329-335．
［5］ 刘一华,贺赟辉,詹春晓,等.盲孔法中释放系数的数值计算方法［J］ .机械强度,2008,30（1）：33-36．
LIU Yihua,HE Yunhui,ZHAN Chunxiao,et al.Numerical Method for calculation of release coefficients in blind hole method ［J］.Journal of Mechanical Stress,2008,30（1）：33-36．
［6］ 印兵胜.盲孔法测量残余应力技术［R］.郑州：郑州机械研究所,2004．
［7］ 张晓宏,赵海燕,蔡志鹏,等.小孔法测量残余应力时孔边塑性应变的有限元分析及修正［J］.机械工程学报，2005,41（3）：193-200．
ZHANG Xiaohong,ZHAO Haiyan,CAI Zhipeng,et al.FEM analysis and correction on plasticity effect at the hole edge when using the centre hole method for measuring residual stress \
[J\].Chinese Journal of Mechanical Engeneering,2005,41（3）：193-200．

［8］ MOHARAMI R,SATTARIFAR I.Experimental and numerical study of measuring high welding residual stresses by using the blindholedrilling technique ［J］.The Journal of Strain Analysis for Engineering Design.2008,43（3）：141-148．
［9］ 李广铎,刘柏梁,李本远.孔边塑性变形对测定焊接残余应力精度的影响［J］.焊接学报,1986,7（2）：87-93．
LI Guangduo,LIU Boliang,LI BenYuan.Influence of holeside plastic deformation on the accuracy of residual welding stress measurement ［J］.Transactions of The China Welding Institution,1986,7（2）：87-93．
［10］ 陈惠南.盲孔法测量残余应力A、B系数计算公式讨论［J］.机械强度,1989,11（2）：31-36．
CHEN Huinan.A discussion of calculation of coefficients of A and B by blindholedrilling method ［J］.Journal of Mechanical Strength,1989,11（2）：31-36．
［11］ 谭明鹤,王荣辉,黄永辉.盲孔法测残余应力中应变释放系数的修正方法［J］.热加工工艺,2007,36（19）：65-68．
TAN Minghe,WANG Ronghui,HUANG Yonghui.Correctional method of strain release coefficients by blindhole technique to measure residual stress ［J］.Hot Working Techonlogy,2007,36（19）：65-68．
［12］ 徐芝伦.弹性力学［M］.3版.北京：高等教育出版社,1990:5．
［13］ 刘鸿文.材料力学［M］.4版.北京：高等教育出版社,2000:237、246．
No related articles found!