[1] HIDAKA T, WANG H, ISHIDA T, et al. Rotational transmission error of K-H-V plantary gears with cycloid gear (1st report, analytical method of the rotational transmission error)[J]. JSME International Journal:Serises C, 1994, 60(570):645-653.
[2] ISHIDA T, WANG H, HIDAKA T, et al. Rotational transmission error of K-H-V planetary gears with cycloid gear (2nd report, effects of manufacturing and assembly error)[J]. JSME International Journal:Serises C, 1994, 60(578):278-285.
[3] 何卫东, 陆岩, 吴鑫辉. 基于等价模型的RV减速器扭转刚度计算[J]. 机械传动, 2013, 37(9):38-41 HE Wei-dong, LU Yan, WU Xin-hui. Torsional rigidity calculation of RV reducer based on equivalent model[J]. Journal of Mechanical Transmission, 2013, 37(9):38-41
[4] SHAN L J, LIU Y T, HE W D. Analysis of nonlinear dynamic accuracy on RV transmission system[J]. Advanced Materials Research, 2012, 510:529-535.
[5] ZHANG Y H, CHEN Z, HE W D. Virtual prototype simulation and transmission error analysis for RV reducer[J]. Applied Mechanics and Materials, 2015, 789:226-230.
[6] 张大卫, 王刚, 黄田, 等. RV减速机动力学建模与结构参数分析[J]. 机械工程学报, 2001, 37(1):69-73 ZHANG Da-wei, WANG Gang, HUANG Tian, et al. Dynamic formulation of RV reducer and analsis of structural parameters[J]. Chinese Journal of Mechanical Engineering, 2001, 37(1):69-73
[7] 杨玉虎, 朱临宇, 陈振宇, 等. RV减速器扭转刚度特性分析[J]. 天津大学学报:自然科学与工程技术版, 2015, 48(2):111-117 YANG Yu-hu, ZHU Lin-yu, CHEN Zhen-yu, et al. Characteristic analysis of torsional stiffness of RV reducer[J]. Journal of Tianjin University:Science Technology, 2015, 48(2):111-117
[8] CHEN C, YANG Y H. Structural characteristics of rotate vector reducer free vibration[J]. Shock and Vibration, 2017, 2017:4214-4370.
[9] HAN L S, GUO F. Global sensitivity analysis of transmission accuracy for RV-type cycloid-pin drive[J]. Journal of Mechanical Science and Technology, 2016, 30(3):1225-1231.
[10] SUN Y G, YU G B, ZHANG J, et al. Reliability prediction of RV reducer based on fault tree and Monte-Carlo simulation[J]. Applied Mechanics and Materials, 2013, 274:663-666.
[11] 吕明帅. RV减速器传动特性的仿真与实验研究[D]. 哈尔滨:哈尔滨工业大学, 2016:31-54. LV Ming-shuai. Simulation and experimental study of transmision characteriestic of RV reducer[D]. Harbin:Harbin Institute of Technology, 2016:31-54.
[12] VAREDI-KOULAEI S M, DANIALI H M, FARAJTABAR M, et al. Reducing the undesirable effects of joints clearance on the behavior of the planar 3-RRR parallel manipu-lators[J]. Nonlinear Dynamics, 2016, 86:1007-1022.
[13] 李同杰, 朱如鹏, 鲍和云, 等. 行星齿轮系扭转非线性振动建模与运动分岔特性研究[J]. 机械工程学报, 2011, 47(21):76-83 LI Tong-jie, ZHU Ru-peng, BAO He-yun, et al. Nonlinear torsional vibration Modeling and Bifurcation characteristic study of a planetary gear train[J]. Journal of Mechanical Mngineering, 2011, 47(21):76-83
[14] KHABOU M T, BOUCHAALA N, CHAARI F, et al. Study of a spur gear dynamic behavior in transient regime[J]. Mechanical Systems and Signal Processing, 2011, 25(8):3089-3091.
[15] LEI D C, TANG J Y, TANG J J. Gear dynamic transmission error testing[J]. Advanced Materials Research, 2014, 871:352-357.
[16] 李瑰贤, 于广滨, 温建民, 等. 求解齿轮系统非线性动力学微分方程的多尺度方法[J]. 吉林大学学报:工学版, 2008, 38(1):75-79 LI Gui-xian, YU Guang-bin, WEN Jian-min, et al. Nonlinear torsional vibration modeling and bifurcation characteristic study of a planetary gear train[J]. Journal of Jilin University:Engineering and Technology Edition, 2008, 38(1):75-79
[17] 刘振皓. 车辆复合行星传动系统动力学特性研究[D]. 武汉:武汉大学, 2012:18-30. LIU Zhen-hao. Research on dynamic characteristics of vehicle compound planetary gear train sets[D]. Wuhan:Wuhan University, 2012:18-30.
[18] GUO Y, PARKER R G. Purely rotational model and vibration modes of compound planetary gears[J]. Mechanism and Machine Theory, 2010, 45(3):365-377.
[19] 李一民, 郝志勇, 叶慧飞. 柴油机正时齿轮系动力学特性分析[J]. 浙江大学学报:工学版, 2012, 46(8):1472-1477 LI Yi-min, HAO Zhi-yong, YE Hui-fei. Dynamic characteristic analysis of diesel timing gear trains[J]. Journal of Zhejiang University:Engineering Science, 2012, 46(8):1472-1477
[20] FARSHIDIANFAR A, SAGHAFI A. Identification and control of chaos in nonlinear gear dynamic systems using Melnikov analysis[J]. Physics Letters A, 2014, 378(46):3457-3463.
[21] 刘文, 李锐, 张晋红, 等. 斜齿轮时变啮合刚度算法修正及影响因素研究[J]. 湖南大学学报:自然科学版, 2018, 45(2):1-10 LIU Wen, LI Rui, ZHANG Jin-hong, et al. Study on correction algorithm of time-varying meshing stiffness of helical gears and its influencing factors[J]. Journal of Hunan University:Natural Sciences, 2018, 45(2):1-10
[22] LI Z, WANG J, ZHU R. Influence comparisons of two version tooth profile modifications on face gear dynamic behaviors[J]. Journal of Vibroengineering, 2016, 18(6):3499-3511.
[23] GUILBAULT R, LALONDE S, THOMAS M. Nonlinear damping calculation in cylindrical gear dynamic modeling[J]. Journal of Sound and Vibration, 2012, 331(9):2110-2128.
[24] WU L, TANG J, CHEN S. Effect of nonlinear impact damping with non-integer compliance exponent on gear dynamic characteristics[J]. Journal of Central South University:Science and Technology of Mining and Metallurgy, 2014, 21(10):3713-3721.
[25] 曾庆峰, 安子军. 无隙摆线钢球传动啮合副啮合刚度系数分析[J]. 机械设计, 2017, 34(4):24-28 ZENG Qing-feng, AN Zi-jun. Analysis of meshing stiffness coefficient for no clearance cycloid ball transmission meshing pair[J]. Journal of Machine Design, 2017, 34(4):24-28
[26] 陈忠敏, 侯力, 段阳, 等. 新型摆线针轮行星减速器传动系统的振动[J]. 吉林大学学报:工学版, 2018, 48(1):174-185. CHEN Zhong-min, HOU Li, DUAN Yang, et al. Vibration characteristics analysis of the new pin-cycloid speed reducer[J]. Journal of Jilin University:Engineering and Technology Edition, 2018, 48(1):174-185. |