Research on cutting stability of generalized manufacturing space based on response surface mode
HUANG Hua1,2, ZHANG Shu-you1, LIU Xiao-jian1, HE Zai-xing1
1.State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China; 2. School of Mechanical and Electrical Engineering, Lanzhou University of Science and Technology, Lanzhou 730050, China
A method of combining the response surface mode (RSM) and experimental design was presented based on the combination of different positions in the moving trajectory of the machine tool spindle box and the column in order to analyze the cutting stability in the whole processing spatial distribution. A combination at key position was selected as samples, and the dynamics property of the samples was calculated via ANSYS. The limit critical cutting depth of each sample was calculated, and the quadratic polynomial RSM reflecting the relation between position and stability of limit critical cutting depth was established. The limit critical cutting depth in the entire space approximation was calculated, and the quality of RSM was further evaluated. The great influence of position changes of moving parts on the stability of cutting was shown with a high speed horizontal machining center (MC) as an example, providing some theoretical support for optimization of machining process and structure design．
HUANG Hua, ZHANG Shu-you, LIU Xiao-jian, HE Zai-xing. Research on cutting stability of generalized manufacturing space based on response surface mode. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(7): 1215-1223.
［1］ ALTINTAS Y. Manufacturing Automation\[M\]. Cambridge: Cambridge University Press, 2000．
［2］ 刘强, 李忠群. 数控铣削加工过程仿真与优化-建模、算法与工程应用［M］. 北京：航空工业出版社, 2011.
［3］ HUNG Jui-pin, LAI Yuan-lung, LIN Ching-yuan. Modeling the machining stability of a vertical milling machine under the influence of the preloaded linear guide ［J］. International Journal of Machine Tools and Manufacture, 2011, 51(9): 731-739．
［4］ ZULAIKA J J, CAMPA F J, LOPEZ L N. An integrated process machine approach for designing productive and lightweight milling machines ［J］. International Journal of Machine Tools and Manufacture,2011, 51(7): 591-604．
［5］ GRAHAM E, MEHRPOUYA M, PARK S S. Robust prediction of chatter stability in milling based on the analytical chatter stability ［J］. Journal of Manufacturing Processes, 2013, 15(4): 508-517．
［6］ 刘海涛, 赵万华. 基于广义加工空间概念的机床动态特性分析［J］.机械工程学报,2010,46(21):54-60.
LIU Hai-tao, ZHAO Wan-hua. Dynamic characteristic analysis for machine tools based on concept of generalized manufacturing space ［J］. Journal of Mechanical Engineering, 2010, 46(21): 54-60．
［7］ MOHIT L, ALTINTAS Y, SRIKANTH A. Rapid evaluation and optimization of machine tools with position dependent stability ［J］. International Journal of Machine Tools and Manufacture, 2013, 68 (3): 81-90．
［8］ SCHMITZ T L, DAVIES M A, KENNEDY M D. Tool point frequency response prediction for high-speed machining by RCSA ［J］. Journal of Manufacturing Science and Engineering, 2001, 123(4): 700-707．
［9］ 关振群,顾元宪, 张洪武, 等.三维CAD/CAE一体化的参数化动态有限元建模［J］.计算机集成制造系统,2003, 9(12): 2112-2119．
GUAN Zhen-qun, GU Yuan-xian, ZHANG Hong-wu, et al. A parameterized method for 3D finite element modeling based on CAD/CAE ［J］. Integration Computer Integrated Manufacturing Systems, 2003, 9 (12): 2112-2119．
［10］ 廖伯瑜, 周新民, 尹志宏.现代机械动力学及其工程应用［M］.北京: 机械工业出版社,2004．
［11］ 蒋书运, 祝书龙.带滚珠丝杠副的直线导轨结合部动态刚度特性［J］.机械工程学报,2010,46(1): 92-99．
JIANG Shu-yun, ZHU Shu-long. Dynamic characteristic parameters of linear guideway joint with ball screw ［J］. Journal of Mechanical Engineering, 2010, 46(1): 92-99.
