[1] PAYRI F, BROATCH A, MARGOT X, et al. Sound quality assessment of diesel combustion noise using incylinder pressure components[J]. Measurement Science and Technology, 2009, 20: 1-12.
[2] LUA M H, JEN M U. Source identification and reduction of engine noise [J]. Noise Control Engineering Journal, 2010, 58(3): 251-258.
[3] ZHANG Jun-hong, HAN Jun. CAE process to simulate and optimize engine noise and vibration [J]. Mechanical Systems and Signal Processing, 2006, 20: 1400-1409.
[4] 贾维新,郝志勇,杨金才.虚拟预测方法在柴油机低噪声设计中的应用[J].浙江大学学报: 工学版,2007,41(3): 489-493.
JIA Wei-xin, HAO Zhi-yong, YANG Jin-cai. Application of virtual prediction method to low-noise diesel engine design [J]. Journal of Zhejiang University, Engineering Science Edition,2007, 4l(3): 489-493.
[5] 杨陈,郝志勇,陈馨蕊.柴油机机体辐射噪声预测及低噪声改进设计[J].江苏大学学报: 自然科学版: 2008, 4: 301-303.
YANG chen, HAO Zhi-yong, CHEN Xin-rui. Prediction of engine block’s radiation noise and lownoise design [J]. Journal of Jiangsu University, Engineering Science Edition: 2008, 4: 301-303.
[6] 李民,舒歌群,卫海桥.发动机安装条件对多体动力学计算影响的研究[J].内燃机工程,2009,30(4): 63-67.
LI Min, SHU Ge-qun, WEI Hai-qiao. Study on Influence of Installing Conditions on Engine Multi-Body Dynamics Simulation [J]. Chinese Internal Combustion Engine Engineering, 2009, 30(4): 63-67.
[7] 盛宏玉.结构动力学[M].合肥: 合肥工业大学出版社,2005: 161-167.
[8] 孙世基,黄承绪.机械系统刚柔耦合动力分析及仿真[M].北京: 人民交通出版社,2000: 140-179.
[9] GENG Z, CHEN J. Investigation into piston-slap-induced vibration for engine condition simulation and monitoring [J]. Journal of Sound and Vibration, 2005, 282: 735-751.
[10] 杨陈.低噪声轻量化单缸柴油机的虚拟设计技术研究[D].杭州: 浙江大学,2009: 154-166.
YANG Chen. Research on light-weight and low-noise design for single cylinder diesel engine with virtual design technology [D]. Hangzhou: Zhejiang University,2009: 154-166.
[11] 左孔天,陈立平,钟毅芳,等. 基于人工材料密度的新型拓扑优化理论和算法研究[J].机械工程学报,40,12(12): 31-37.
ZUO Kong-tian, CHEN Li-ping, ZHONG Yi-fang, et a1. New theory and algorithm research about topology optimization based on artificial material density [J]. Chinese Journal of Mechanical Engineering,2004,40(12): 31-37.
[12] 杨陈,郝志勇,刘宝林,等. 变密度法在气缸体轻量化设计中的应用[J].浙江大学学报工学版,2009,43(5): 916-919.
YANG Chen, HAO Zhi-yong, LIU Bao-lin, et al. Application of variable density method to lightweight design of cylinder block [J]. Journal of Zhejiang University, Engineering Science Edition,2009,43(5): 916-919. |