[1] 梅祖彦.抽水蓄能发电技术[M].北京: 机械工业出版社, 2000: 1-6. [2] 张兰金,纪兴英,常近时.水泵水轮机泵工况转轮流场分析[J].农业机械学报,2008, 39(4): 69-72. ZHANG Lanjin, JI Xingying, CHANG Jinshi. Flow analysis of the pumpturbine runner in the pump mode [J] Transactions of the Chinese Society for Agricultural Machinery, 2008, 39(4): 69-72. [3] 徐宇,唐学林,吴玉林. 水泵水轮机转轮内水泵工况紊流分析[J]. 水力发电学报, 2000, 3(3): 75-83. XU Yu, TANG Xuelin, WU Yulin. Threedimensional turbulent flow analysis through a pumpturbine runner at pump mode [J]. Journal of Hydroelectric Engineering, 2000, 3(3): 75-83. [4] 杨琳,陈乃祥,樊红刚. 水泵水轮机全流道双向流动三维数值模拟与性能预估 [J]. 工程力学, 2006, 23(5): 157-162. YANG lin, CHEN Naixiang, FAN Honggang. 3D twoway of numerical simulation and performance estimation on the whole flow passage of the reversible pumpturbine runner [J]. Engineering Mechanics, 2006, 23(5): 157-162. [5] NAKAMURA T. Study on high speed and high head reversible pump turbines [C]∥18th IAHR Symposium on Hydraulic Machinery and Cavitation. Valencia: IAHR, 1996: 210-219. [6] 韩路长,刘跃进,李毅斌. 应用SST kω湍流模型计算Rushton搅拌釜流场[J]. 化学工程, 2006, 34(3): 28-32. HAN Luchang, LIU Yuejin, LI Yibin. Calculation for Rushton stirred tank with SST turbulence kω model [J]. Chemical Engineering, 2006, 34(3): 28-32. [7] GAO Hong, LIN Wanlai, DU Zhaohui. Numerical flow and performance analysis of a waterjet axial flow pump [J]. Ocean Engineering, 2008, 35(16): 1604-1614. [8] 邵卫云, 毛根海, 刘国华. 基于曲面拟合的水泵水轮机全特性曲线的新变换[J]. 浙江大学学报:工学版, 2004, 38(3): 385-388. SHAO Weiyun, MAO Genhai, LIU Guohua. New transformation method for complete characteristic curves of reversible pump turbine based on surface fitting [J]. Journal of Zhejiang University: Engineering Science, 2004, 38(3): 385-388. [9] 于治明. 斜流式水泵水轮机泵工况零流量制动力矩的计算[J]. 沈阳航空工业学院学报,2000,17(3): 81-83. YU Zhiming. A calculation on brake torque of diagonal flow pumpturbineat zero delivery condition [J]. Journal of Shenyang Institute of Aeronautical Engineering, 2000, 17(3): 81-83. [10] ZOBEIRI A, KUENY J. Pumpturbine rotorstator interactions in generating mode: pressure fluctuation in distributor channel [C]∥23th IAHR Symposium on Hydraulic Machinery and Systems. Yokohama: IAHR, 2006: 1-10. |