[1] COLELLA F, REIN G, CARVEL R, et al. Analysis of the ventilation systems in the Dartford tunnels using a multi-scale modelling approach[J]. Tunnelling and Underground Space Technology, 2010, 25(4):423-432.
[2] LI Z X, ZHOU T Q, CHAN T H T, et al. Multi-scale numerical analysis on dynamic response and local damage in long-span bridges[J]. Engineering Structures, 2007, 29(7):1507-1524.
[3] KADOWAKI H, LIU W K. Bridging multi-scale method for localization problems[J]. Computer Methods in Applied Mechanics and Engineering, 2004, 193(30):3267-3302.
[4] CAO Y, WANG P, JIN X, et al. Tunnel structureanalysis using the multi-scale modeling method[J]. Tunnelling and Underground Space Technology, 2012, 28:124-134.
[5] 丁幼亮,李爱群,缪长青,等.大跨桥梁结构损伤诊断与安全评估的多尺度有限元模拟研究[J].地震工程与工程振动,2006,26(2):66-72. DING You-liang, LI A-iqun, MIAO Chang-qing, et al. Multi-level finite element modeling of long-span bridges for structural damage diagnosis and safety evaluation[J]. Earthquake Engineering and Engineering Vibration, 2006, 26(2):66-72.
[6] 程小卫,李易,陆新征,等.基于多尺度模型的RC框架撞击倒塌响应数值分析[J].振动与冲击,2016,35(5):82-88. CHENG Xiao-wei, LI Yi, LU Xin-zheng, et al. Numerical analysis for collapse response of a RC frame subjected to impact loading based on multi-scale model[J]. Journal of Vibration and Shock, 2016, 35(5):82-88.
[7] 陆新征,林旭川,叶列平.多尺度有限元建模方法及其应用[J].土木工程与管理学报,2008,25(4):76-80. LU xin-zheng, LIN Xu-chuan, YE lie-ping. Multi-scale finite element modeling method and its application[J]. Journal of Civil Engineering and Management, 2008,25(4):76-80.
[8] PANASENKO G P. Multi-scale modelling for structures and composites[M]. Dordrecht:Springer, 2005:1-19.
[9] RAFⅡTABAR H, HUA L, CROSS M. A multi-scale atomistic-continuum modelling of crack propagation in a two-dimensional macroscopic plate[J]. Journal of Physics Condensed Matter, 1998, 40(10):2375.
[10] REPETTO M P, SOLARI G. Wind-induced fatigue collapse of real slender structures[J]. Engineering Structures, 2010, 32(12):3888-3898.
[11] REPETTO M P, SOLARI G. Wind-induced fatigue of structures under neutral and non-neutral atmospheric conditions[J]. Journal of Wind Engineering & Industrial Aerodynamics, 2007, 95(9):1364-1383.
[12] JIA J. Investigations of a practical wind-induced fatigue calculation based on nonlinear time domain dynamicanalysis and a full wind-directional scatter diagram[J]. Ships & Offshore Structures, 2014, 9(3):272-296.
[13] DONG W, MOAN T, GAO Z. Fatigue reliability analysis of the jacket support structure for offshore wind turbine considering the effect of corrosion and inspection[J]. Reliability Engineering & System Safety, 2012, 106(106):11-27.
[14] DONG W, MOAN T, GAO Z. Long-term fatigueanalysis of multi-planar tubular joints for jacket-type offshore wind turbine in time domain[J]. Engineering Structures, 2011, 33(6):2002-2014.
[15] DONG W, XING Y, MOAN T, et al. Time domain-based gear contact fatigue analysis of a wind turbine drivetrain under dynamic conditions[J]. International Journal of Fatigue, 2013, 48(1):133-146.
[16] FANG Z, LI A, LI W, et al. Wind-induced fatigueanalysis of high-rise steel structures using equivalent structural stress method[J]. Applied Sciences, 2017,7(1):71.
[17] 方钊,李爱群,李万润,等. 高层钢框架支撑结构多尺度风致疲劳分析方法[J]. 东南大学学报:自然科学版,2017,47(1):137-141. FANG Zhao, LI Ai-qun, LI Wan-run, et al; Multi-scale wind-induced fatigue analysis method of high-rise steel braced frame structure[J]. Journal of SoutheastUniversity:Natural Science Edition, 2017, 47(1):137-142.
[18] 王新敏.ANSYS工程结构数值分析[M].北京:人民交通出版社,2013:394-399.
[19] 徐芝纶.弹性力学(上册).北京:高等教育出版社,2006:23-25.
[20] 王勖成.有限单元法[M].北京:清华大学出版社,2003:56-61.
[21] 中华人民共和国建设部.中华人民共和国国家标准.建筑结构荷载规范(GB50009-2001),2002.
[22] 武岳,孙瑛,郑朝荣,孙晓颖.风工程与结构抗风设计[M].哈尔滨:哈尔滨工业大学出版社, 2014.
[23] HOBBACHER A. Recommendations for Fatigue Design of Welded Joints and Components[M]. Basel:Springer International Publishing, 2016.
[24] 张彦华.焊接结构疲劳分析[M].北京:化学工业出版社,2013:107-117.
[25] 崔闯,卜一之,张清华,等.基于热点应力法的正交异性钢桥面板疲劳寿命评估[J].桥梁建设,2014,44(4):62-67. CUI Chuang, BU Yi-zhi, ZHANG Qing-hua, et al. Fatigue life assessment of orthotropic steel deck plate based on hot spot stress method[J]. Bridge Construction, 2014, 44(4):62-67. |