机械工程 |
|
|
|
|
基于圆盘缝隙阻尼器的中心通流静压推力轴承 |
李林, 顾临怡, 罗高生 |
1.浙江大学 流体动力与机电系统国家重点实验室,浙江 杭州 310027 |
|
Hydrostatic thrust bearing with central flow path based on circular flat slit fed restrictor |
LI Lin, GU Lin-yi, LUO Gao-sheng |
1. State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China |
[1] 路甬祥,液压气动技术手册[M].北京: 机械工业版社, 2007: 5-17.
[2] 许耀明, 油膜理论与液压泵和马达的摩擦副设计[M].北京:机械工业出版社,1987:13.
[3] LI Lin, GU Lin-yi, LUO Gao-sheng, etc. Simulation research on the variable displacement hydraulic motor with variable effective piston stroke for hydraulic propulsion system [C]∥ Oceans 2012 MTS/IEEE: VA. Virginia Beach, US: \[s.n.\], 2012: 14-19.
[4] BRIAN ROWE W. Hydrostatic, aerostatic, and hybrid bearing design [M]. London, UK: Elsevier Inc. 2012: 138-140.
[5] 陈燕生, 液体流体静压推力轴承原理和设计[M].北京: 国防工业出版社, 1980: 39-44.
[6] 王勇勤, 刘志芳, 严兴春,等.毛细管节流静压油膜轴承动态特性分析[J]. 重庆大学学报, 2011, 34(3): 25-31.
WANG Yong-Qin, LIU Zhi-Fang, YAN Xin-chun, et al. Analysis on dynamic performance of hydrostatic oil film bearing throttled by capillary [J]. Journal of Chongqing University, 2011, 34(3): 25-31.
[7] 朱世强, 林建亚. 巨型转动构件高精度静平衡方法的研究[J]. 机械工程学报, 2001, 37(4), 12-16.
ZHU Shi-qiang, LIN Jian-ya. Study on high accuracy balancing methods for huge rotor [J]. Chinese Journal of Mechanical Engineering, 2001, 37(4): 12-16.
[8] 张有华. 高压机械密封的设计与应用[J]. 流体机械, 2005, 33(2): 58.
ZHANG You-hua,. Design and application of mechanical seal for high pressure [J]. Fluid Machinery, 2005, 33(2): 58. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|