能源与机械工程 |
|
|
|
|
吸入室角度对环形射流泵空化性能的影响 |
肖龙洲1,2,龙新平1,2 |
1.武汉大学 动力与机械学院,湖北 武汉 430072; 2.水射流理论与新技术湖北省重点实验室,湖北 武汉 430000 |
|
Influence of inclined angle on cavitation performance of annular jet pump |
XIAO Long-zhou1,2, LONG Xin-ping1,2 |
1. School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072, China; 2.Key Laboratory of Jet Theory and New Technology of Hubei Province, Wuhan 430000, China |
[1] LU H, SHANG H. Mechanism and calculation theory of jet pump cavitation [J]. Scientia Sinica Series A, 1987, 30(11): 1174-1187.
[2] 龙新平,关运生,王丰景,等. 补气位置对改善射流泵空化性能的试验[J]. 江苏大学学报:自然科学版,2009, 30(3): 270-273.
LONG Xin-ping, GUAN Yun-sheng, WANG Feng-jing, et al. Experiment on air supplying position for improvement of jet pump cavitation performance [J]. Journal of Jiangsu University: Natural Science Edition, 2009, 30(3): 270-273.
[3] 龙新平,何培杰. 射流泵汽蚀问题研究综述[J]. 水泵技术, 2003(4): 33-38.
LONG Xin-ping, HE Pei-jie. A review of jet pump cavitation [J]. Journal of Pump Technology, 2003(4): 33-38.
[4] WIESCHE S. Numerical simulation of cavitation effects behind obstacles and in an automotive fuel jet pump [J]. Journal of Heat Mass Transfer, 2005, 41(7): 615-624.
[5] LONG X, YAO H, ZHAO J. Investigation on mechanism of critical cavitating flow in liquid jet pumps under operating limits [J]. International Journal of Heat and Mass Transfer, 2009, 52(9): 2415-2420.
[6] KUDIRKA A A, DECOSTER M A. Jet pump cavitation with ambient and high temperature water [J]. ASME Journal of Fluids Engineering, 1979, 101(1): 93-99.
[7] BONNINGTON S T. Jet pumps and ejectors: a state of the art reviews and bibliographer [M]. Cranfield, Bedford, UK: BHRA Fluid Engineering, 1972.
[8] CUNNINGHAM R G, HANSEN A G, NA T Y. Jet pump cavitation [J]. ASME: Journal of Basic Engineering, 1970, 92(3): 483-494.
[9] SHIMIZU Y, NAKAMUEA S, KAZUHARA S, et al. Studies of the configuration and performance of annular type jet pumps [J]. ASME Journal of fluids Engineering, 1987, 109(3): 205-212.
[10] 刘晖霞. 环形射流泵产生空化的机理及其改善的研究[D]. 重庆: 重庆大学, 2007.
LIU Hui-xia. Study of cavitation mechanism and its improvement for the annular jet pump [D]. Chongqing: Chongqing University, 2007.
[11] 龙新平,程茜,韩宁,等. 射流泵空化流动的数值模拟[J]. 排灌机械工程学报, 2010, 28(1): 7-11.
LONG Xin-ping, CHENG Qian, HAN Ning, et al. Numerical simulation on cavitating flow within jet pump [J]. Journal of Drainage and Irrigation Machinery Engineering, 2010, 28(1): 7-11.
[12] XIAO L, LONG X, LI X, et al. Numerical investigation on the recirculation in annular jet pumps [J]. Journal of Mechanical Science and Technology, 2013, 27(6): 16031609.
[13] 蔡标华. 射流泵初生空化及其试验研究[D]. 武汉:武汉大学,2005.
CAI Biao-hua. Analysis and experimental study on incipient cavitation within jet pumps [D]. Wuhan: Wuhan University, 2005.
[14] FRANC J P, MICHEL J M. Fundamentals of cavitation [M]. Netherlands: Springer, 2005. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|