机械与能源工程 |
|
|
|
|
主动式比例插装阀与系统工况的匹配性设计 |
孔晓武,方锦辉,蒲增坤 |
浙江大学 流体动力与机电系统国家重点实验室,浙江 杭州 310027 |
|
Compatibility design of active proportional cartridge valve with system conditions |
KONG Xiao-wu, FANG Jin-hui, PU Zeng-kun |
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China |
[1] PALUCHNIAK M, MILLAGE B A. New closed loop shot control system features total integration [J]. Die Casting Engineer, 1993, 37(6): 21-24.
[2] BAMKOPF R, HOLZL G. Electro-hydraulic control and diagnostic system for a 25 MN extrusion press [J]. Hydraulic and Pneumatics, 1991, 35(10):762-766.
[3] 路甬祥,吴根茂,邱敏秀,等. 三通插装式电液比例方向阀的开发研究[J]. 液压与气动,1987(2): 3-6.
LU Yong-xiang, WU Gen-mao, QIU Min-xiu, et al. Development of a 3-way electro-hydraulic proportional cartridge valve [J]. Chinese Hydraulics and Pneumatics, 1987(2): 3-6.
[4] FU Lin-jian, WEI Jian-hua, QIU Min-xiu. Dynamic characteristics of large flow rating electro-hydraulic proportional cartridge valve [J]. Chinese Journal of Mechanical Engineering, 2008, 21(6): 5762.
[5] 于良振,王明琳, 方锦辉. 大流量双主动双电反馈电液比例插装式节流阀研制与开发[J]. 机床与液压, 2010(2): 4647, 82.
YU Liang-Zhen, WANG ming-lin, FANG Jin-hui. Development of an active proportional cartridge valve [J]. Machine Tool and Hydraulics, 2010(2): 4647, 82.
[6] 王琳. 陶瓷砖自动压砖机液压系统设计中的2个问题[J]. 陶瓷, 2007(7): 27-30.
WANG Lin. Two problems of the electro-hydraulic control system of ceramic press [J]. China Ceramics, 2007(7): 27-30.
[7] LATOUR C. Development and testing of measures aimed at the reduction of flow forces in 2-way cartridge valves [J]. Hydraulic and Pneumatics, 1994, 38(2): 54-58.
[8] RENN J C, CHEN K J. Design of a novel unbalanced-type hydraulic cartridge valve with faster response [J]. Journal of the Chinese Society of Mechanical Engineers, 2002, 23(5): 481-486. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|