[1] DANIEL R, TIAN G H, XU H M, et al. Effect of spark timing and load on a DISI engine fuelled with 2,5-dimethylfuran [J]. Fuel, 2011, 90: 449-458.
[2] TIAN G H, DANIEL R, LI H Y, et al. Laminar burning velocities of 2,5-Dimethylfuran compared with ethanol and gasoline [J]. Energy&Fuels, 2010, 24: 3898-3905.
[3] BINDER J B, RAINES R T. Simple chemical transformation of lignocellulosic biomass into furans for fuels and chemicals [J]. J Am Chem Soc, 2009, 131(5): 1979-1985.
[4] ROMAN L R, BARRETT C J, LIU Z Y, et al. Production of dimethylfuran for liquid fuels from biomass-derived carbohydrates[J]. Nature, 2007, 447: 982-985.
[5] ZHONG S H, DANIEL R, XU H M, et al. Combustion and emissions of 2,5-dimethylfuran in a direct-injection spark-ignition engine [J]. Energy Fuels, 2010, 24: 2891-2899.
[6] 苏万华,赵华,王建昕,等. 均质压燃低温燃烧发动机理论与技术[M]. 北京: 科学出版社, 2010.
[7] MOUSDALE D M. Bio-ethanol as a Fuel: Biotechnology, Biochemical Engineering and Sustainable Development [M]. Boca Raton: CRC Press. 2008.
[8] 时钧. 化学工程手册[M]. 北京: 化学工业出版社, 2003.
[9] NAKATA K, SASAKI N, OTA A, et al. The effect of fuel properties on thermal efficiency of advanced spark-ignition engines [J]. Intl J Engine Res, 2011, 13(2): 274-281.
[10] 田国弘,徐宏明,DANIEL R. 2,5-二甲基呋喃的喷雾特性及发动机适应性[J]. 汽车安全与节能学报, 2010, 1(2): 132-140.
TIAN Guo-hong, XU Hong-ming, DANIEL R, et al. Spray characteristics and engine adaptability of 2,5-dimethylfuran [J].Journal of Automotive Safety and Energy, 2010, 1(2): 132-140.
[11] STONE R. Introduction to Internal Combustion Engines [M]. 3rd ed. Basingstoke: Macmillan Press Ltd. 1999. |