机械工程 |
|
|
|
|
双悬臂梁直径测量传感器性能分析 |
乔龙学1, 王伟刚1, 何姗2, 鲁阳2 |
1. 浙江大学 机械工程学系,浙江 杭州310027;2. 浙江大学 航空航天学院,浙江 杭州310027 |
|
Performance analysis on twin-cantilever transducer
for measuring diameter |
QIAO Long-xue1, WANG Wei-gang1, HE Shan2, LU Yang2 |
1. Department of Mechanical Engineering,Zhejiang University, Hangzhou 310027, China;
2. School of Aeronautics and Astronautics, Zhejiang University, Hangzhou 310027, China |
引用本文:
乔龙学, 王伟刚, 何姗, 鲁阳. 双悬臂梁直径测量传感器性能分析[J]. J4, 2012, 46(6): 1060-1066.
QIAO Long-xue, WANG Wei-gang, HE Shan, LU Yang. Performance analysis on twin-cantilever transducer
for measuring diameter. J4, 2012, 46(6): 1060-1066.
链接本文:
http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2012.06.016
或
http://www.zjujournals.com/eng/CN/Y2012/V46/I6/1060
|
[1] 中华人民共和国国家标准.GB/T 2282002,金属材料室温拉伸试验方法[S].北京:中国标准出版社,2002: 1-36.
[2] 中华人民共和国国家标准.GB/T 223152008,金属材料弹性模量和泊松比试验方法[S]. 北京,中国标准出版社,2009: 1-32.
[3] EN 2002001: 2005(E), Aerospace seriesMetallic materialsTest methodsPart 1: Tensile testing at ambient temperature[S]. Brussels: Aerospace & Defence Industries Association of Europe Pablications, 2005: 1-22.
[4] LI Jinhuan,OSAMI S,TAKAMASA S. Measurement of diameter of metal cylinders using a sinusoidally vibrating interference pattern[J]. Optics Communications, 2006, 260: 398-402.
[5] SORAYA A. K. Measurement of wire diameter by optical diffraction[J]. Optics & Laser Technology,2004, 36: 63-67.
[6] DIWAN Yogesh C, KAMESWARA Rao L. A new approach for measurement of wire diameter by optical diffraction[C]∥ Proceedings of SPIE. [S.l.]: SPIE, 2005, 5856: 554-561.
[7] GY A’KOS. A twodimensional laser diameter gauge[J]. Optics & Laser Technology, 1990, 22: 414-418.
[8] LIPINSKI G,PRIEL M,VAILLEAU G P. European comparison of external diameter measurements of metallic wires[J]. Metrologia, 1997, 34: 235-240.
[9] MENG Zong,LIU Bin,DAI Guiping. The measurement of large workpiece diameter of axle with double laser interferometer[C]∥Proceedings of SPIE. [S.l.]: SPIE, 2005, 5638: 438-443.
[10] CHEN Zhifeng, LU Haibao. A novel instrument for ultraprecise measurement of diameter[C]∥Proceedings of SPIE.[S.l.]: SPIE,2000, 4223: 212-216.
[11] VACHARANUKUL K, MEKID S. Inprocess dimensional inspection sensors[J]. Measurement, 2005,38: 204-218.
[12] 陈祖朋,丁志龙,许克洵,等.一种电阻应变式直径测量装置及其使用方法:中国,CN101329159[P]. 2009-12-06.
CHEN Zupeng,DING Zhilong,XU Kexun,et al. A strain gauge apparatus for measuring diameter and its use method: China, CN101329159[P]. 2009-12-06.
[13] NEUGEBAUER M,LDICKE F,BASTAM D,et al. A new comparator for measurement of diameter and form of cylinders, spheres and cubes under cleanroom conditions[J]. Measurement Science and Technology, 1997, 8: 849-856.
[14] KIM J A,KIM J W,KANG C S,et al. An interferometric Abbetype comparator for the calibration of internal and external diameter Standards[J]. Measurement Science and Technology, 2010, 21: 075109. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|