[1] SU S, POHL J H, HOLCOMBE D, et al. Techniques to determine ignition, flame stability and burnout of blended coals in p.f. power station boilers [J]. Progress in Energy and Combustion Science, 2001, 27(1): 7598.
[2] BISWAS S, CHOUDHURY N, SARKAR P, et al. Studies on the combustion behaviour of blends of Indian coals by TGA and drop tube furnace [J]. Fuel Processing Technology, 2006, 87(3): 191199.
[3] HELLE S, GORDON A, ALFARO G, et al. Coal blend combustion: link between unburnt carbon in fly ashes and maceral composition [J]. Fuel Processing Technology, 2003, 80(3): 209223.
[4] BACKREEDY R I, JONES J M, MA L, et al. Prediction of unburned carbon and NOx in a tangentially fired power station using single coals and blends [J]. Fuel, 2005, 84(17): 21962203.
[5] RUSHDI A, SHARMA A, GUPTA R. An experimental study of the effect of coal blending on ash deposition [J]. Fuel, 2004, 83(4/5): 495506.
[6] SU S, POHL J H, HOLCOMBE D, et al. Slagging propensities of blended coals [J]. Fuel, 2001, 80(9): 13511360.
[7] YIN C G, LUO Z Y, ZHOU J H, et al. A novel non-linear programming-based coal blending technology for power plants [J]. Chemical Engineering Research and Design, 2000, 78(1): 118124.
[8] MAHAMUD M M, NOVO M F. The use of fractal analysis in the textural characterization of coals [J]. Fuel, 2008, 87(2): 222231.
[9] MAHAMUD M, LOPEZ O, PIS J J, et al. Textural characterization of coals using fractal analysis [J]. Fuel Processing Technology, 2003, 81(2): 127142.
[10] MEDEK J, WEISHAUPTOVA Z. The microporous phase of carbonaceous substances and its fractal dimension [J]. Fuel, 2000, 79(13): 16211626.
[11] YAO Y B, LIU D M, TANG D Z, et al. Fractal characterization of adsorption-pores of coals from North China: an investigation on CH4 adsorption capacity of coals [J]. International Journal of Coal Geology, 2008, 73(1): 2742.
[12] HU S, LI M, XIANG J, et al. Fractal characteristic of three Chinese coals [J]. Fuel, 2004, 83(10): 13071313.
[13] 姜秀民,杨海平,闫澈,等. 超细化煤粉表面形态分形特征[J]. 中国电机工程学报,2003, 23(12): 165169.
JIANG Xiu-min, YANG Hai-ping, YAN Che, et al. Fractal characteristic of surface structure of micro- pulverized coal [J]. Proceedings of CSEE, 2003, 23(12): 165169.
[14] 平传娟,周俊虎,程军,等. 混煤热解过程中的表面形态[J]. 化工学报, 2007, 58(7): 17981804.
PING Chuan-juan, ZHOU Jun-hu, CHENG Jun, et al. Surface structure of blended coals during pyrolysis [J]. Journal of Chemical Industry and Engineering (China), 2007, 58(7): 17981804.
[15] 周俊虎,李艳昌,程军,等. 精细水煤浆的颗粒分形特征对燃烧特性的影响规律[J]. 化工学报, 2007, 58(7): 18051809.
ZHOU Jun-hu, LI Yan-chang, CHENG Jun, et al. The impact of ultra-clean micronized coal water slurrys particle fractal dimension on its combustion characteristic [J]. Journal of Chemical Industry and Engineering (China), 2007, 58(7): 18051809.
[16] 张保生,刘建忠,程军,等. 微分差热法确定沉降炉试验中低挥发分混煤着火点[J]. 浙江大学学报:工学版, 2008, 42(5): 839842.
ZHANG Bao-sheng, LIU Jian-zhong, CHENG Jun, et al. Derivative differential thermal method for determining igniting point of low-volatile blending coals in subsiding furnace [J]. Journal of Zhejiang University: Engineering Science, 2008, 42(5): 839842.
[17] 岑可法,樊建人,池作和,等. 锅炉和热交换器的积灰、结渣、磨损和腐蚀的防止原理与计算[M]. 北京:科学出版社,1994. |