Please wait a minute...
浙江大学学报(工学版)
材料科学与化学工程     
沥青混合料变形特性
王岚,陈刚,邢永明, 胡江三
内蒙古工业大学 土木工程学院, 内蒙古 呼和浩特010051
Deformation characteristics of asphalt mixture
WANG Lan, CHEN Gang, XING Yong ming, HU Jiang san
College of Civil Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
 全文: PDF(1496 KB)   HTML
摘要:

采用数字散斑相关技术对橡胶粉(CR)改性沥青混合料和苯乙烯 丁二烯 苯乙烯三嵌段共聚物(SBS)改性沥青混合料进行变形场分析,利用Vic 3D图像处理软件对散斑图像进行处理,提取试件表面随着荷载变化的位移场和应变场.通过预切口半圆弯拉实验研究沥青混合料的断裂韧性.结果表明:水平位移变化速率和水平应变适用于沥青混合料裂纹性质及断裂特性的分析.在沥青混合料裂纹开裂过程中,开裂时的荷载、最大荷载与最大水平应变对应荷载并非同一荷载值.与SBS改性沥青混合料相比,长期温度老化和冻融循环前后,CR改性沥青混合料都具有更强的抗开裂能力,并且长期温度老化对2种改性沥青混合料影响较大.通过分析断裂韧性指标得到与DSCM实验结果相吻合的开裂特性,验证了DSCM对沥青混合料裂纹研究的适用性.

Abstract:

The deformation fields  of crumb rubber (CR) modified asphalt mixture and styrene butadiene styrene (SBS) modified asphalt mixture were analyzed and compared  by using digital speckle correlation method (DSCM). Vic 3D image manipulation software was applied to analyze speckle images. Deformation field and strain field of the samples’ surface that changed along with load were extracted. Fracture toughness of the  asphalt mixture was studied through pre cut semi circle flexural tensile test.Results show that the change rates of horizontal displacement and the horizontal strain are suitable for the analysis of the crack properties and fracture characteristics of asphalt mixture. The micro crack initiation load, the maximum load and the maximum horizontal strain are not the same load value. Compared with the SBS modified asphalt mixture, the CR modified asphalt mixture has stronger ability to resist cracking before and after long term aging and freeze thaw cycle.The long term temperature aging of asphalt mixture has greater impact on the two kinds of modified asphalt mixture. The cracking characteristics from analysis of fracture toughness index agree with the experimental results of DSCM, indicating that DSCM is suitable for research on crack in asphalt mixture.

出版日期: 2015-10-15
:  U 443.33  
基金资助:

国家自然科学基金资助项目(11162012).

通讯作者: 邢永明,男,教授,博导.ORCID: 0000 0001 6726 4041.     E-mail: xym@imut.edu.cn
作者简介: 王岚(1966- ),女,教授,博导,从事道路工程材料研究.ORCID: 0000 0002 8130 3702. E-mail: wanglan661018@163.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

王岚,陈刚,邢永明, 胡江三. 沥青混合料变形特性[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008 973X.2015.09.026.

WANG Lan, CHEN Gang, XING Yong ming, HU Jiang san. Deformation characteristics of asphalt mixture. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008 973X.2015.09.026.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008 973X.2015.09.026        http://www.zjujournals.com/eng/CN/Y2015/V49/I9/1805

[1] DAS P K, JELIGEN D, BIRGISSON B. Evaluation of the low temperature cracking performance of asphalt mixtures utilizing HMA fracture mechanics[J].Construction and Building Materials,2013, 47: 594-600.
[2] MUNIANDY R,AKHIRN A B C M, HASSIM S, et al. Laboratory fatigue evaluation of modified and unmodified asphalt binders in stone mastic asphalt mixtures using a newly developed crack meander technique  [J].Journal of Materials in Civil Engineering,2014, 59(3): 1-8.
[3] ARAGO F T S, KIM Y R, LEE J, et al.Micromechanical model for heterogeneousasphalt concrete mixtures subjected to fracture failure[J].Journal of Materials in Civil Engineering,2010, 23(1): 30-38.
[4] KIM Y R, BAEK C, UNDERWOOD B S, et al. Application of viscoelastic continuum damage model based finite element analysis to predict the fatigue performance of asphalt pavements [J].KSCE Journal of Civil Engineering,2008, 12(2):109-120.
[5] ZHU X, CHEN L. Numerical prediction of elastic modulus of asphalt concrete with imperfect bonding [J].Construction and Building Materials,2012, 35: 45-51.
[6] MAHMOUD E, SAADEH S, HAKIMELAHI H, et al. Extended finite element modelling of asphalt mixtures fracture properties using the semi circular bending test [J].Road Materials and Pavement Design,2014, 15(1): 153-166.
[7] KIM Y R, PINTO I, PARK S W. Experimental evaluation of anti stripping additives in bituminous mixtures through multiple scale laboratory test results [J].Construction and Building Materials, 2011, 29(4):386-393.
[8] YUE Z Q, CHEN S, THAM L G. Finite element modeling of geomaterials using digital image processing [J]. Computers and Geotechnics,2003, 30(5):375-397.
[9] SUTTON M A, WOLTERS W J, PETERS W H,et al.Determination of displacements using an improved digital correlation method[J].Image and Vision Computing, 1983, 1(83):133-139.
[10] ZHANG X N, YUAN M M.Study on fatigue deformation of asphalt mixtures in digital speckle correlation method[J]. International Journal of Digital Content Technology and its Applications,2012, 6(17):162-170.
[11] PETERS W H, RANSON W F.Digital imaging techniques in experimental stress analysis [J].Optical Engineering,1982, 21(3):427-431.
[12] SUTTON M A, MCNEILL S R, JANG J.Effects of subpixel image restoration on digitalcorrelation error [J].Journal of Optical Engineering, 1988, 27(10):870-877.
[13] KIM Y R, WEN H.Fracture energy from indirect tension test [J]. Journal of the Association of Asphalt Paving Technologists,2002, 71:779-793.
[14] BJORN B, ANTONIO M, ELENA R,et al. Characterisation of asphalt mixture cracking behaviour using the three point bending beam test [J].International Journal of Pavement Engineering,2011, 6(12):569-578.
[15] TAN Y Q, HOU M H, ZHANG L,et al.Studying the strain field distribution of asphalt mixture with the digitalspeckle correlation method[J].Road Materials and Pavement Design,2014, 15(1):90-101.
[16] LITTLE D N, MAHMOUB K. Engineering properties of first generation plasticized sulfur binders and low temperature fracture evaluation of plasticized sulfur paving mixtures [J].Transportation Research Board, 1985(1034): 103-111.

No related articles found!