Please wait a minute...
浙江大学学报(工学版)
J4  2011, Vol. 45 Issue (8): 1346-1351    DOI: 10.3785/j.issn.1008-973X.2011.08.003
机械工程     
平地机工作装置混联机构简化位置正解分析
潘勇军1, 侯亮1, 王其亮1, 罗斯进2
1.厦门大学 机电工程系,福建 厦门 361005； 2.厦工(三明)重型机器有限公司,福建 三明 365500
Forward displacement analysis on hybrid mechanism of working device of grader
PAN Yong-jun1, HOU Liang1, WANG Qi-liang1, LUO Si-jin2
1. Department of Mechanical and Electrical Engineering, Xiamen University, Xiamen 361005, China； 2. XGMA(Sanming) Heavy Machinery Company, LTD, Sanming 365500, China
 全文: PDF  HTML
摘要：

为了研究平地机工作装置的运动学特性，提出工作装置混联机构简化位置正解的分析方法.根据平地机工作装置结构及各部件运动副关系，抽象出工作装置机构模型.基于平地机作业方式特点，对该机构进行分解和分析，确定少自由度并联机构为该机构的主体.利用螺旋理论对该并联机构进行自由度分析，采用数值分析法对该并联机构进行位置正解分析，并基于ADAMS实现平地机工作装置并联机构部分的位置正解分析.现场的物理试验表明，对于工作装置并联机构部分的位置正解，试验结果与计算机仿真结果基本吻合，最大误差不超过3%，满足平地机工作装置的精度要求；从而验证了所提出的分析方法的有效性.依据该理论基础，通过进一步的分析，获得平地机混联机构工作装置的运动学特性，最后讨论该机构设计要点，为工作装置设计和优化奠定理论基础.
Abstract:

In order to understand the kinematics characteristics of the working device of a grader, a forward displacement analysis method is proposed to analyze the device’s hybrid mechanism. A hybrid mechanism model of the grader’s working device was extracted according to its structure and spatial kinematic pairs. The model was then decomposed and analyzed based on its working conditions, and features. A lower-mobility parallel mechanism was confirmed to be the main part of this hybrid mechanism. A forward solution of position for the mechanism was obtained based on a numerical analysis method, while degree of freedom analysis was conducted based on the screw theory, A forward displacement analysis on the working device’s parallel mechanism was carried out using ADAMSTM, a system dynamic analysis software tool. Experiments were performed subsequently to validate the effectiveness of the proposed analysis method. The results showed that experiment data losely matched computer simulation data, with less than 3% maximum error. On the basis of this theoretical foundation, the kinematics characteristics of the working device hybrid mechanism were obtained. The key issues on the optimization and innovation design of this mechanism were discussed.
出版日期: 2011-09-08
:  S 222.5  
基金资助:

国家自然科学基金资助项目（70772093）；国家科技支撑计划资助项目（2011BAF11B00-01）；福建省区域重大科技专项资助项目（2009H4015）.
通讯作者: 侯亮,男,教授,博导.     E-mail: hliang@xmu.edu.cn
作者简介: 潘勇军（1982—）,男,硕士生,从事CAD/CAE,结构优化方面的研究.E-mail: panyongjun_segula@yahoo.com.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

潘勇军, 侯亮, 王其亮, 罗斯进. 平地机工作装置混联机构简化位置正解分析[J]. J4, 2011, 45(8): 1346-1351.

PAN Yong-jun, HOU Liang, WANG Qi-liang, LUO Si-jin. Forward displacement analysis on hybrid mechanism of working device of grader. J4, 2011, 45(8): 1346-1351.

链接本文:

https://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2011.08.003    或    https://www.zjujournals.com/eng/CN/Y2011/V45/I8/1346

［1］ 焦生杰.国内外平地机发展现状与新技术［J］.筑路机械与施工机械化,2003,(03)： 10-17.

JIAO Shengjie.New technology and development situation of grader ［J］.Road Machinery & Construction Mechanization,2003,(03)： 10-17.

［2］ ANDRZEJ S,GRZEGORZ T.Grader blade stabilization system ［J］.Automation in Construction,1998,7(5)：385-389.

［3］ JOHN C,RAYMOND A.Slope controls: US,3561538 ［P］.1971-02-09.

［4］ WILLIAN R,TILLMAN.Blade control apparatus of a motor grader including wand vibration damping element： US,4009758 ［P］. 1977-05-01.

［5］ 余波.PY165A型平地机的位置分析及运动仿真［D］.成都：四川大学,2001.

YU Bo.Position analysis and motion simulation of PY165A blade grader ［D］.Chengdu: Sichuan University,2001.

［6］ 甘建国,李锦阳,朱春灿,等.应用I_DEAS软件对平地机进行机构仿真［J］.建设机械技术与管理,2005,(01)： 85-89.

GAN Jianguo, LI Jinyang, ZHU Chuncan, et al.Mechanism simulation of grader by IDEAS software ［J］.Technology & Management for Construction Machinery,2005,(01)： 85-89.

［7］ 成凯,吴守强,李相锋.推土机与平地机［M］.北京：化学工业出版社,2006: 155-156.

［8］ 黄真,赵永生,赵铁石.高等空间机构学［M］.北京：高等教育出版社,2006: 115-158.

［9］ 赵云峰,程丽,赵永生.3UPS/S并联机构运动学分析及机构优化设计［J］.机械设计,2009,26(1)： 46-49.

ZHAO Yunfeng,CHENG Li,ZHAO Yongsheng.Kinematic analysis of 3UPS/S parallel mechanism and its optimization design［J］.Journal of Machine Design,2009,26(1)： 46-49.

［10］ 王宣银,程佳.4TPS_1PS四自由度并联电动平台动力学建模与位姿闭环鲁棒控制［J］.浙江大学学报：工学版,2009,43(8)： 1492-1496.

WANG Xuanyin,CHENG Jia.Dynamic modeling and robust control in task space of 4DOF parallel electric platform with 4 TPS1PS structure［J］.Journal of Zhejiang University: Engineering Science,2009,43(8)： 1492-1496.

［11］ 夏天.工业机器人运动学标定及误差分析研究［D］.上海：上海交通大学,2009.

XIA Tian.Research of kinematic calibration and error analysis for industrial robot ［D］.Shanghai: Shanghai Jiao Tong University,2009.

［12］ 丛大成,于大泳,韩俊伟.Stewart平台的运动学精度分析和误差补偿［J］.工程设计学报,2006,13(3)：162-165.

CONG Dacheng,YU Dayong,HAN Junwei.Kinematics accuracy analysis and error compensation of Stewart platform［J］.Journal of Engineering Design, 2006, 13(3)： 162-165.

［13］ YANG G L,HO EHL,LIN W,et al.A differential geometry approach for the workspace analysis of spherical parallel manipulators ［C］∥ 11th World Congress in Mechanism and Machine Science.Tianjin: China Machinery Press,2004,(04)： 2060-2065.
No related articles found!