Please wait a minute...
Chinese Journal of Engineering Design  2003, Vol. 10 Issue (6): 321-325    DOI:
    
Modeling analysis and research of automobile ride
 GAO  Hong-Hua, CHEN  Xue-Dong, QIAN  Wen-Jun
College of Machanism,Huazhong University of Science&Technology,Wuhan 430070,China
Download: HTML     PDF(264KB)
Export: BibTeX | EndNote (RIS)      

Abstract  From the analysis of automobile vibration sources and the human responses to vibration,a mechanic dynamics model of man- chair- vehicle system with 13 degrees of freedom is built by simulating technology.Using the random vibration theory,the calculating methods are developed for parameters,including vibration pattern,transfer function,wheel transient load,and acceleration of seat rank parameter.With available data of motor,and the simulation calculating results about vibration characteristics are given as follows:the engine,the stiffness of wheel tire and damping of the automobile shock absorber have not much effect on the vibration of the seat;vertical stiffness of back row seat has much effect on the vertical vibration as it gets larger;the stiffness and damping of back shock absorber have much effect on the vibration of back row seat;the greater the stiffness of wheel tire is,the more the vibration increases;the stiffness of back shock absorber has some effect on the automobile ride quality.As the stiffness of back shock absorber decreases,the vertical acceleration of the back row seat decreases.With this simulation software,automobile ride quality can be predicted or evaluated.

Key wordsride quality      model analysis      vibration     
Published: 28 December 2003
Cite this article:

GAO Hong-Hua, CHEN Xue-Dong, QIAN Wen-Jun. Modeling analysis and research of automobile ride. Chinese Journal of Engineering Design, 2003, 10(6): 321-325.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2003/V10/I6/321


汽车平顺性的建模分析及研究

通过分析汽车振动源和人体对振动的反应,利用模拟技术,建立了十三自由度人-椅-车系统的动力学模型,运用随机振动理论给出了振动形态、传递函数、车轮的动载荷、座椅加速度等参量,并利用已有的汽车数据,对汽车行驶时的振动特性进行了模拟,得到了如下结论:发动机与轮胎刚度、减振器阻尼对后排座椅处的振动影响不大;后排座椅的垂直刚度增加很大时,对垂直方向振动影响比较大;后桥刚度、阻尼对后排座椅处的振动影响较大,后轮胎刚度增加,则振动加强;后桥刚度对汽车平顺性有一定影响,后桥的刚度减小,则后排座椅处垂直加速度相应减小,使用该模型可对汽车行驶平顺性进行预测或评估。

关键词: 平顺性,  建模分析,  振动 
[1] Le YU,Yongjun HOU,Yongqiang ZHAO,Yuqi WANG. Synchronous sliding mode control of double-mass vibration system driven by two asynchronous motors[J]. Chinese Journal of Engineering Design, 2023, 30(5): 608-616.
[2] Yao ZHANG,Xiao-hua ZHU,Liang-liang DONG. Research on rubber damping flexible fixture for weakly rigid casing[J]. Chinese Journal of Engineering Design, 2022, 29(5): 587-594.
[3] Zhi-qiang HUANG,Ren-song YANG,Gang LI,Tao LI,Qin HUANG,Chuang YE. Vibration analysis and test study of large reciprocating compressor host[J]. Chinese Journal of Engineering Design, 2022, 29(4): 465-473.
[4] ZHAO Kai-ping, HE Tao, WANG Chuan-li, SHI Rui. Research on amplitude compensation performance of double spring electro-hydraulic vibration cylinder[J]. Chinese Journal of Engineering Design, 2021, 28(6): 737-745.
[5] WEI Jian-bao, LI Song-mei, XU Yu-tian. Analysis of torsional vibration characteristics of tripod-ball cage double universal coupling[J]. Chinese Journal of Engineering Design, 2021, 28(4): 458-465.
[6] JIA Du-ping, MO Li, MAO Liang-jie, ZENG Song. Experimental research on vortex-induced vibration of deepwater riser-test string system[J]. Chinese Journal of Engineering Design, 2021, 28(2): 170-178.
[7] HUANG Wei, XU Jian, LU Xin-zheng, HU Ming-yi, LIAO Wen-jie. Research on dynamic vibration absorption for power equipment and building floor[J]. Chinese Journal of Engineering Design, 2021, 28(1): 25-32.
[8] ZENG Qi, BIN Guang-fu, LI Chao, CHEN Li-feng. Study on the influence of torsional stiffness of coupling on torsional vibration characteristics of slender series shafting of submersible oil electric pump[J]. Chinese Journal of Engineering Design, 2021, 28(1): 89-94.
[9] BAI Yang-xi, CHEN Hong-yue, CHEN Hong-yan, WANG Xin. Analysis and test verification of transverse vibration of shearer rocker arm under multiple constraints[J]. Chinese Journal of Engineering Design, 2020, 27(6): 707-712.
[10] MO Li, JIA Du-ping, MAO Liang-jie, WANG Guo-rong. Experimental study on the vibration mechanism of horizontal well completion pipe string under different gas production[J]. Chinese Journal of Engineering Design, 2020, 27(6): 690-697.
[11] ZENG Guang, BIAN Qiang, ZHAO Chun-jiang, YIN Yu-feng, FENG Yi-jie. Analysis of stability and vibration characteristics of angular contact ball bearing cage under variable parameters[J]. Chinese Journal of Engineering Design, 2020, 27(6): 735-743.
[12] WANG Chuan, FANG Hai-hui, NA Feng, JIN Hao, WANG An-yi, LIU Jing. Research on vertical release and installation of drill string-production tree based on heave compensation[J]. Chinese Journal of Engineering Design, 2020, 27(4): 478-486.
[13] TANG Liang, HE Ren-jie, GONG Fa-yun, LI Fei-yang, LIU Guan-jun, YANG Min. Internal excitation law research and dynamic characteristic optimization of wind turbine gearbox under varying wind load[J]. Chinese Journal of Engineering Design, 2020, 27(2): 212-222.
[14] SONG Jian-hu. Vibration analysis of a data transmission antenna on high orbit satellite[J]. Chinese Journal of Engineering Design, 2019, 26(3): 274-279.
[15] NI Hong-qi, JIN Chi, FENG Fei. Development of fault diagnosis system for corrugated compensator[J]. Chinese Journal of Engineering Design, 2019, 26(3): 354-363.