Please wait a minute...
Chinese Journal of Engineering Design  2009, Vol. 16 Issue (4): 292-296    DOI:
    
Influence analysis of stress stiffening effect of rotating wheel-disc on its modal characteristics
 SU  Rong-Hua, WANG  Bi-Jun, DING  Wen-Wen, ZHU  Liu-Qing
School of Mechanics and Engineering, Liaoning Technical University, Fuxin 123000, China
Download: HTML     PDF(426KB)
Export: BibTeX | EndNote (RIS)      

Abstract  Utilizing ANSYS as analyzing platform, research on modal characteristic of rotating wheeldisc by taking into account of stress stiffening effect was carried out. The variation rules of rotating wheel-disc's modal frequencies and vibration modes were revealed under different rotating speeds. The results show that the modal frequencies increase with the increase of rotating speed, and increment is proportional to the square of rotating speed when rotating speed varies in a certain scope. Furthermore, the concept of frequency influence coefficient was introduced and a simplified formula of calculating the dynamic modal frequencies was put forward with its application range. It can conclude that the first vibration mode may possibly change with the increase of rotating speed under a certain condition.

Key wordsrotating wheel-disc      stress stiffening effect      modal frequency      vibration mode      frequency influence coefficient     
Published: 28 August 2009
Cite this article:

SU Rong-Hua, WANG Bi-Jun, DING Wen-Wen, ZHU Liu-Qing. Influence analysis of stress stiffening effect of rotating wheel-disc on its modal characteristics. Chinese Journal of Engineering Design, 2009, 16(4): 292-296.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2009/V16/I4/292


旋转轮盘应力刚化效应对模态特性影响分析

以ANSYS作为分析平台,对考虑应力刚化效应的旋转轮盘模态特性进行深入研究,揭示不同工作转速下旋转轮盘模态频率和振型变化规律.研究结果表明:当轮盘转速在一定范围内变化时,模态频率随着转速增加而增大,增加值与转速的平方成正比.在此基础上,引入频率影响系数的概念,提出了计算动模态频率的简化公式,并给出了适用范围.研究表明,在一定条件下,随着转速的提高,旋转轮盘的第1阶振型就可能发生变化.

关键词: 旋转轮盘,  应力刚化效应,  模态频率,  振型,  频率影响系数 
[1] HUANG Zhi-qiang, XU Zi-yang, MU Xin-ming, LIANG Chun-ping, TANG Yu-jie. Design and analysis of semi-active crane heave compensation test rig[J]. Chinese Journal of Engineering Design, 2019, 26(2): 215-222.
[2] LÜ Hong-ming, QIAN Kun-cai. Identification method of normal contact stiffness between disc and pad of floating caliper disc brake based on modal frequency characterisitcs[J]. Chinese Journal of Engineering Design, 2018, 25(4): 388-393.
[3] LIN Wei-yan, LIU Wen-guang, YAN Long, SHU Bin. Impact of bolt-hole clearance on modal frequency of single lapped and single bolted joint plate[J]. Chinese Journal of Engineering Design, 2017, 24(4): 418-424.
[4] WANG Cheng-jun, ZHANG Tian-yu, LI Long, CHEN Jin-yan, MENG Xiang-rui. Study on screening efficiency of moist raw coal particles on 3-DOF hybrid vibrating screen[J]. Chinese Journal of Engineering Design, 2016, 23(3): 264-270.
[5] GUO Ning-Ping, ZHOU Hai-Bo, WANG Wen-Zhu, ZHENG Lei. Modal analysis of maglev linear motion platform[J]. Chinese Journal of Engineering Design, 2011, 18(3): 183-190.