Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2015, Vol. 22 Issue (2): 178-184    DOI: 10.3785/j.issn. 1006-754X.2015.02.013
    
Design of highly efficient broadband Class-E power amplifier based on improved matching network
LI Yong-le1， NAN Jing-chang1， YOU Chang-jiang2， DU Xue-kun1，2， JIANG Di2
1.School of Electrics and Information Engineering， Liaoning Technical University， Huludao 125105， China； 2.School of Communication & Information Engineering, University of Electronic Science and Technology of China， Chengdu 611731， China
Download: HTML     PDF(2872KB)
Export: BibTeX | EndNote (RIS)      

Abstract  In order to solve the problem of Class-E power amplifier (PA) having too narrow bandwidth, an improved scheme on the input and output matching network of Class-E power amplifier was proposed. The output matching network utilized the transmission-line combining with Chebyshev low\|pass matching network in order to suppress harmonics in a wide operating bandwidth; in addition, the closed-form solution broadband band\|pass matching network in the input matching network utilized the transformation method, which could enhance the design flexibility of matching network. Based on the proposed method and the optimum source and load impedances obtained by multi-harmonic bilateral\|pull technology, a broadband high efficiency Class-E power amplifier based on CGH40010F device was designed. The measured drain efficiency was more than 65% and maximum efficiency was 83%, output power was 39-41.1 dBm and power gain was 11-13.1 dB, and gain flatness was ±1 dB at the operation of a 28 dBm input power, 28 V drain voltage and -3.3 V gate voltage in the L-band. The measurements have shown that the proposed method is well verified, and the designed Class-E PA has a wide bandwidth and high efficiency.

Key words： broadband matching network      Class-E      high efficiency      power amplifier     
Received: 25 March 2014      Published: 28 April 2015
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

LI Yong-le， NAN Jing-chang， YOU Chang-jiang， DU Xue-kun， JIANG Di. Design of highly efficient broadband Class-E power amplifier based on improved matching network. Chinese Journal of Engineering Design, 2015, 22(2): 178-184.

URL:

https://www.zjujournals.com/gcsjxb/10.3785/j.issn. 1006-754X.2015.02.013     OR     https://www.zjujournals.com/gcsjxb/Y2015/V22/I2/178


基于改进型匹配网络的宽带高效率E类功放的设计

为了解决E类功放工作带宽过窄的问题，对E类功放的输入、输出匹配网络提出了一种改进方案.该方案中输出匹配网络采用微带线结构与切比雪夫低通匹配网络相结合的方法，在较宽的工作带宽内有效地抑制了谐波；并采用阻抗变换方法设计了含闭式解的宽带带通输入匹配网络，明显增强了输入匹配网络设计的灵活性．利用该方案，同时采用多谐波双向牵引技术得到功率管的最佳源阻抗和负载阻抗，基于CGH40010F功率管设计了一款应用于L波段的宽带高效率E类功放．测试结果表明，在输入功率为28 dBm，漏极偏置电压VDS=28 V，栅极电压VGS=-3.3 V时，在整个L波段频率范围内漏极工作效率大于65%，最高达到83%，输出功率为39~41.1 dBm，增益为11~13.1 dB，增益平坦度为±1 dB.这一结果验证了该改进方案的有效性，使得E类功放具有宽带宽、高效率的性能．

关键词： 宽带匹配网络,  E类,  高效率,  功率放大器 
[1] NAN Jing-chang, ZHANG Peng-jun. Design and realization of balanced Class E/F power amplifier[J]. Chinese Journal of Engineering Design, 2018, 25(2): 237-244.
[2] ZHU ER Li. The study of CFR algorithm for digital input power amplifier of 3G base station[J]. Chinese Journal of Engineering Design, 2011, 18(5): 396-.
[3] SHENG Xiao-Min, ZI Jia-Lei, MI Hai-Qing, CHEN Tao. Research on surface waviness of advanced ceramics in
high efficiency surface grinding[J]. Chinese Journal of Engineering Design, 2006, 13(6): 421-425.