Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2008, Vol. 15 Issue (6): 422-425    DOI:
    
Design of wireless network node of smart home based on DSP
 NI  Shui-Ping1, SUN  Qiu-Ping2, CHEN  Su-Xia1
1.School of Computer Science &Technology, Henan Polytechnic University， Jiaozuo 454000， China; 
2. Yellow River Conservancy Technical Institute， Kaifeng 475001， China
Download: HTML     PDF(2600KB)
Export: BibTeX | EndNote (RIS)      

Abstract  By applying wireless sensor network technology to smart home system, design of a rational network node is the key problem in smart home system. Based on the analysis of the architecture of wireless sensor networks nodes, wireless sensor networks nodes using DSP chip TMS320F206 microcontroller and AT86RF230 transceiver are proposed. Considering the demands of energy saving and extensibility, a protocol of timely opening and closing is utilized and the time proportion is 1∶99. The wireless network node can satisfy the requirements of low-power consumption, long transmitting distance, accurate localization and interference-resistance．

Key words： wireless sensor network      TMS320F206      AT86RF230      smart home     
Published: 28 December 2008
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
NI Shui-Ping
SUN Qiu-Ping
CHEN Su-Xia
Cite this article:

NI Shui-Ping, SUN Qiu-Ping, CHEN Su-Xia. Design of wireless network node of smart home based on DSP. Chinese Journal of Engineering Design, 2008, 15(6): 422-425.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2008/V15/I6/422


基于DSP的智能家居无线网络节点的设计

将无线传感器网络技术融入智能家居系统中，设计合理的网络节点成为智能家居系统的核心问题．在分析无线传感器网络节点结构基础上，提出以DSP 芯片TMS320F206为处理器、AT86RF230为无线通信芯片的无线传感器网络节点．充分考虑节能和扩展性的需求，采用节点定时打开与关闭的协议且打开与关闭的时间比为1∶99．试验表明该无线网络节点能满足低功耗、长传输距离、准确定位、抗干扰的要求．

关键词： 无线传感器网络,  TMS320F206,  AT86RF230,  智能家居 
No related articles found!