Please wait a minute...
Chinese Journal of Engineering Design  2007, Vol. 14 Issue (6): 478-481    DOI:
    
Fuzzy control with heterogeneous distribution membership function for
fluctuation in fuel pressure
 HUANG  Qiang, DING  Zhi-Hua, WU  Chong-Jun, LIU  Xin
School of Mechanical Engineering, Jiujiang University, Jiujiang 332005, China
Download: HTML     PDF(342KB)
Export: BibTeX | EndNote (RIS)      

Abstract  The fuel pressure control system for diesel engine should have high accuracy and quick response, but the traditional method is insufficient to fulfill its increasing requirement. So an improved fuzzy control method with Heterogeneous Distribution Membership Function was adopted to control the fuel systemquickly and accurately. Moreover, simulation of the control of fluctuation in fuel pressure of diesel engine was done to demonstrate its validity and feasibility. The simulation result indicates that this method can reduced the pressure amplitude from 1 MPa to 0.7 MPa and shorten the fluctuation time from 8 ms to 5 ms. Therefore, this method can improve both the pressure amplitude and fluctuationand is an intelligent method with wide application prospect.

Key wordsdiesel engine      fuel pressure      fuzzy control      membership function     
Published: 28 December 2007
Cite this article:

HUANG Qiang, DING Zhi-Hua, WU Chong-Jun, LIU Xin. Fuzzy control with heterogeneous distribution membership function for
fluctuation in fuel pressure. Chinese Journal of Engineering Design, 2007, 14(6): 478-481.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2007/V14/I6/478


油压扰动的非均匀分布隶属函数模糊控制方法

柴油机的燃油压力控制系统具有控制精度高、响应速度快等特点,传统控制方法难以满足其不断提高的需要,所以,提出利用非均匀分布隶属函数的改进模糊控制方法来实现对燃油系统的快速、精确控制。并通过对柴油机燃油压力的扰动控制进行仿真来验证该方法的有效性和可行性。仿真结果表明:同样对于1 MPa的压力波动进行控制,相对于传统PID控制方法而言,采用该改进模糊控制后的压力扰动由1 MPa降为0.7 MPa,同时,达到稳状态前的扰动持续时间也由8 ms缩短为5 ms。提出的非均匀分布隶属函数的改进模糊控制方法无论是对控制的扰动幅度还是控制的波动性能都有较大改善,是一种具有广阔应用前景的智能化控制方法。

关键词: 柴油机,  燃油压力,  模糊控制,  隶属函数 
[1] Hui ZHANG,Yong-fei ZHU,Xue-fei LIU,Xiang-rong XU. Research on trajectory tracking control of metallurgical industrial robot based on fuzzy iterative Q-learning[J]. Chinese Journal of Engineering Design, 2022, 29(5): 564-571.
[2] DING Shu-yong, ZHANG Zheng, DING Wen-jie, LIN Yong. Optimization design of multi-lane stereo garage and research on vehicle access strategy[J]. Chinese Journal of Engineering Design, 2021, 28(4): 443-449.
[3] WANG Yan, LIU Jing-yu, LI Guang, ZHANG Jia-bo, LIU Xing, ZHOU Xin-xin. Design of navigation control system of AGV based on IGPS and Mecanum wheel[J]. Chinese Journal of Engineering Design, 2020, 27(5): 662-670.
[4] YUAN Kai, LIU Yan-jun, SUN Jing-yu, LUO Xing. Research on control of underwater manipulator based on fuzzy RBF neural network[J]. Chinese Journal of Engineering Design, 2019, 26(6): 675-682.
[5] DUAN Zhi-qiang, GUO Yan-qing, WANG Long. Research on high precision control of large inertia special turntable[J]. Chinese Journal of Engineering Design, 2019, 26(2): 162-169.
[6] HU Jun-feng, LI Yong-ming, ZHENG Chang-hu. Position precision compensation method of a micro-manipulation stage based on fuzzy control[J]. Chinese Journal of Engineering Design, 2018, 25(2): 123-130.
[7] XIE Miao, LIU Zhi-xiang, MAO Jun. Research on control strategy of parking tower hydraulic system and its power-saving technology[J]. Chinese Journal of Engineering Design, 2017, 24(1): 115-120.
[8] LI Fu-gui, LONG Wei, LUO Liang, ZHAN Cong-lai. The application of predictive fuzzy control in the liquefied natural gas peak-shaving system[J]. Chinese Journal of Engineering Design, 2016, 23(1): 95-100.
[9] LIU Zhi-guang, YU Fei, ZHANG Liang, LI Tie-jun, AN Zhan-fa. Force tracking research for robot based on fuzzy adaptive impedance control algorithm[J]. Chinese Journal of Engineering Design, 2015, 22(6): 569-574.
[10] Lv Kuan-zhou1, CHEN Su-xia2, HUANG Quan-zhen1. Flexible manipulator trajectory tracking and vibration fuzzy control[J]. Chinese Journal of Engineering Design, 2015, 22(1): 78-83.
[11] ZHANG Lu-lu, ZHANG Rui-jun, WANG Xiao-wei, WANG Nan-nan. Failure probability analysis of multi-state system based on Bayesian network with fuzzy support radius variable[J]. Chinese Journal of Engineering Design, 2014, 21(5): 405-411.
[12] LEI Fei,YANG Hong-bo. Research on a bandwidth-limited active control system for commercial vehicle cab suspension based on the fuzzy theory[J]. Chinese Journal of Engineering Design, 2014, 21(1): 32-37.
[13] WAN Xiao-Feng, LEI Ji-Tang, YI Qi-Jun, JIA Jin-Xue, ZHANG Yan-Fei, DING Mao. Clutch engaging control of AMT for starting based on speed feedback[J]. Chinese Journal of Engineering Design, 2013, 20(5): 441-445.
[14] GU Xing, ZHONG Ming, YAO Yu-Feng. Position control for sampling arm based on self-adapting fuzzy-PID[J]. Chinese Journal of Engineering Design, 2012, 19(5): 385-390.
[15] GUO Kong-Hui, SUI Ji-Kui, SONG Xiao-Lin, GUO Yao-Hua, XUE Bing. Analysis of fuzzy sky hook semi active control method for high speed railway vehicle lateral damper[J]. Chinese Journal of Engineering Design, 2012, 19(3): 174-181.