Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2004, Vol. 11 Issue (5): 281-283    DOI:
    
Bolt reliability computing-algorithm based on blind number
 XIAO  Cheng-Yong1, WANG  Guo-Biao2, SHI  Bo-Qiang1
1．College of Civil and Environment Engineering，Beijing University of Science and Technology，Beijing 1 00083，China；
2．Department of Engineering and Material Sciences，National Natural Science Foundation of China，Beijing 100085，China
Download: HTML     PDF(121KB)
Export: BibTeX | EndNote (RIS)      

Abstract  This paper describes the blind-number stress-strength reliable computation-model established on the basis of the concept and operations of blind number in Uncertain Theory and offers the corresponding computation program in LabVIEW ．In addition，test on the validity and practicability of this model is also conducted by comparing the result of bolt reliability gained from this model with that obtained from the traditional reliability-design method．

Key words： bolt      blind number      blind number reliability model      blind number variance     
Published: 28 October 2004
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
XIAO Cheng-Yong
WANG Guo-Biao
SHI Bo-Qiang
Cite this article:

XIAO Cheng-Yong, WANG Guo-Biao, SHI Bo-Qiang. Bolt reliability computing-algorithm based on blind number. Chinese Journal of Engineering Design, 2004, 11(5): 281-283.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2004/V11/I5/281


基于盲数的螺栓可靠性计算

基于未确知理论中盲数的概念和运算规则，建立了盲数强度应力可靠度计算模型，并用LabVIEW语言编写了相应的计算程序．通过对螺栓的实际可靠度计算，并与传统可靠度设计进行了对比分析，验证了模型的有效性和实用性．

关键词： 螺栓,  盲数,  盲数可靠度模型,  盲数方差 
[1] HUANG Long-yi, WANG Hua, JI Xu. Calculation of load distribution for three-row roller slewing bearing considering fastening bolts[J]. Chinese Journal of Engineering Design, 2021, 28(3): 350-357.
[2] KE Xin, YANG Guang-wu, XIA Dong, XIAO Shou-ne. Modified calculation of axial relative stiffness between bolt and connected parts[J]. Chinese Journal of Engineering Design, 2019, 26(1): 39-46,109.
[3] BI Tao, SHI Duan-wei, WANG Ke. Load characteristic analysis and strength design for joint bolts of support pivots of tumble gate of ship lift in the Three Gorges[J]. Chinese Journal of Engineering Design, 2018, 25(6): 655-660.
[4] LIN Wei-yan, LIU Wen-guang, YAN Long, SHU Bin. Impact of bolt-hole clearance on modal frequency of single lapped and single bolted joint plate[J]. Chinese Journal of Engineering Design, 2017, 24(4): 418-424.
[5] WU Shu-liang, CHEN Jian-hong, YANG Shan. Optimization of bolting scheme based on combination of principal component analysis and BP neural network[J]. Chinese Journal of Engineering Design, 2012, 19(2): 150-155.
[6] CHEN Ji-Gang, ZHANG Guo-Zhi, LIN Yu-Fei. Finite element model of bending fatigue test of aluminum-alloy wheel[J]. Chinese Journal of Engineering Design, 2011, 18(2): 120-123.
[7] LV Fu-Zai , WANG Fei, XIANG Yi-Qiang, TANG Zhi-Feng, ZHU Ran. Design of a new rockbolt testing method based on magnetostriction guided wave technique[J]. Chinese Journal of Engineering Design, 2010, 17(6): 459-463.