Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2002, Vol. 9 Issue (4): 225-228    DOI:
    
Research on new hydraulic system in filter press
 ZHANG  Qi-Sheng, ZHAO  Jing-Yi, HUANG  Yan-Wei, ZHANG  Xiao-Dong
College of M echanical Engineering，Yanshan University，Qinhuangdao 066004，China
Download: HTML     PDF(185KB)
Export: BibTeX | EndNote (RIS)      

Abstract  Based on the demands of the techniques in filter press and study on hydraulic control system for new filter press，the mathematic model of the whole hydraulic system is built up by bond graphs approach and hydraulic system is simulated by Matlab program ，which is the premise of optimistic design for hydraulic system in filter press．This performance of new system has reached the aims expected in practice．

Key words： filter press      hydraulic system      bond graphs      dynamic simulation     
Published: 28 October 2002
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
ZHANG Qi-Sheng
ZHAO Jing-Yi
HUANG Yan-Wei
ZHANG Xiao-Dong
Cite this article:

ZHANG Qi-Sheng, ZHAO Jing-Yi, HUANG Yan-Wei, ZHANG Xiao-Dong. Research on new hydraulic system in filter press. Chinese Journal of Engineering Design, 2002, 9(4): 225-228.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2002/V9/I4/225


新型压滤机液压控制系统的研制

针对压滤机的工艺要求，在对新型压滤机液压控制系统研究设计的基础上，利用功率键合图方法建立了压滤机液压系统数学模型，并运用Matlab语言进行动态特性仿真．在压滤机现场实际运用表明该系统性能达到了预期目标，为压滤机液压系统优化设计提供了依据．

关键词： 压滤机,  液压系统,  键合图,  动态仿真 
[1] WANG Zhi-li, ZHU Ting-zhong, CHEN Zhi-yong, XI-Bo, JIA Xiao-ping. Design of mechanical structure and hydraulic system of tubular turbine governor[J]. Chinese Journal of Engineering Design, 2020, 27(6): 753-764.
[2] CHEN Zhao-ming, XU Ze-yu, ZOU Jing-song, ZHAO Ying, SHI Ming-quan. Hydraulic system design of multi-functional laying trolley equipment in tunnel construction and its response characteristic analysis[J]. Chinese Journal of Engineering Design, 2019, 26(1): 116-122.
[3] WANG Song-yan, LI Chao-yu, XU Hao. Research on hydraulic system dynamic characteristics of crawler traction tape replacing device[J]. Chinese Journal of Engineering Design, 2018, 25(4): 488-494.
[4] WU Zhong-yi, CHEN Jia-dui, WANG Zi-qin. Research on a hydraulic continuous variable compression ratio technique[J]. Chinese Journal of Engineering Design, 2018, 25(2): 142-150.
[5] ZHANG Zhen， GONG Guo-fang， RAO Yun-yi， WU Wei-qiang， LIU Tong. Design and simulation analysis of gripper and thrust hydraulic system for TBM test rig[J]. Chinese Journal of Engineering Design, 2015, 22(5): 324-329.
[6] YANG Qian-ming， KONG Ling-qi， LI Jian， WANG Shi-gang， GUO Jian-wei. Modeling and simulation of synchronous speed control system about electric hydraulic proportional motor[J]. Chinese Journal of Engineering Design, 2015, 22(5): 330-336.
[7] CHEN Qing-hua， DONG Chang-shuai， XU Man-man， WANG Kai-song， WANG Chuan-li. Dynamic simulation analysis of luffing mechanism in mine hydraulic hoisting machine[J]. Chinese Journal of Engineering Design, 2015, 22(5): 337-343.
[8] ZHANG Zhen， GONG Guo-fang， RAO Yun-yi， WU Wei-qiang， LIU Tong. Design and simulation analysis of gripper and thrust hydraulic system for TBM test rig[J]. Chinese Journal of Engineering Design, 2015, 22(4): 324-329.
[9] CHEN Qing-hua， DONG Chang-shuai， XU Man-man， WANG Kai-song， WANG Chuan-li. Dynamic simulation analysis of luffing mechanism in mine hydraulic hoisting machine[J]. Chinese Journal of Engineering Design, 2015, 22(4): 337-343.
[10] YANG Zhong-jiong，LU Yao-zhong，ZHOU Li-qiang，LI Hong-bing. Research on the characteristics of the TBM thrust hydraulic system under fundamental vibration[J]. Chinese Journal of Engineering Design, 2015, 22(3): 278-283.
[11] ZHU Mao-tao, SHEN Deng-feng, LIANG Yan-chun, WANG Dong-ping, ZHANG Tong. Control strategy design of hydraulic system for series-parallel hybrid transmission[J]. Chinese Journal of Engineering Design, 2014, 21(5): 469-475.
[12] ZHOU Hong-bin， GONG Guo-fang， WANG Lin-tao， WU Wei-qiang. Mechanical structure and hydraulic system design of ¢1.2 m simulated shield machine[J]. Chinese Journal of Engineering Design, 2014, 21(2): 185-190.
[13] ZHANG Hong-Xun, CHEN Yin, ZHANG Jia-Xing. Design and dynamic simulation of pendulum rod removable device for the heavy wheel[J]. Chinese Journal of Engineering Design, 2013, 20(1): 75-79.
[14] FANG Shui-Guang, SHAO Dan-Lu, JIN Ying-Lian, WANG Bin-Rui. Design and dynamic simulation of flexible humanoid manipulator[J]. Chinese Journal of Engineering Design, 2012, 19(4): 307-311.
[15] LIU Guo-Bin, GONG Guo-Fang, ZHU Bei-Dou, SHI Hu. Adaptive PID control for thrust speed of the shield based on BP neural networks[J]. Chinese Journal of Engineering Design, 2010, 17(6): 454-458.