Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2014, Vol. 21 Issue (5): 418-425    DOI: 10.3785/j.issn. 1006-754X.2014.05.003
    
Adaptable architecture design of underwater friction stitch welding machine
CHEN Yong-liang， LIU Pu， LIU Yu-kun
School of Mechanical Engineering， Tianjin University， Tianjin 300072， China
Download: HTML     PDF(2255KB)
Export: BibTeX | EndNote (RIS)      

Abstract  To improve the adaptability and response speed of the underwater friction stitch welding machine for repairing pipe like ocean structures, the adaptable design method is introduced into the design process of friction stitch welding machine. According to the characteristics of function changes on mechanical products, the function structure diagram was extended to show the adaptability of the adaptable product based on the requirement analysis and function analysis. The basic platform, function modules and interfaces were defined combining with the idea of openarchitecture design, so that users could configure modules according to their requirements. A setbased method of adaptability evaluation was developed to evaluate design quality. The underwater friction stitch welding machine was studied which indicated that this method performs well in practicability and operability and could be used in the practice of product design and development.

Key words： rapid respond      open-architecture      functional structure       evaluation of adaptability      adaptable design     
Received: 10 March 2014      Published: 28 October 2014
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
CHEN Yong-Liang
LIU Pu
LIU Yu-Kun
Cite this article:

CHEN Yong-liang， LIU Pu， LIU Yu-kun. Adaptable architecture design of underwater friction stitch welding machine. Chinese Journal of Engineering Design, 2014, 21(5): 418-425.

URL:

https://www.zjujournals.com/gcsjxb/10.3785/j.issn. 1006-754X.2014.05.003     OR     https://www.zjujournals.com/gcsjxb/Y2014/V21/I5/418


水下摩擦叠焊机可适应架构设计方法

为提高水下摩擦叠焊机对海洋管状物修复的适应能力和响应速度，将可适应设计引入叠焊机的设计过程中.针对机械产品功能变化的特点，在需求分析和功能分析的基础上，通过扩展功能结构图来表达可适应产品的可适应性；结合开放式架构的设计理念，明确产品的基础平台、功能模块及其接口，以便用户根据需求选择模块配置；提出了基于集合的产品可适应性评价方法，为评价方案的优劣提供量化指标.以水下摩擦叠焊机产品族设计为例，表明该方法具有较好的实用性和可操作性，可用于产品的开发和设计.

关键词： 快速响应,  开放式架构,  功能结构图,  可适应性评价,  可适应设计 
[1] WANG Bi-hai, ZHANG Jian, CHEN Yong-liang, PENG Qing-jin, GU Pei-hua. Intelligent decision for adaptive design of shield screw conveyor[J]. Chinese Journal of Engineering Design, 2022, 29(1): 1-9.
[2] SUN Zhi-lin, WANG Kai-feng, CHEN Yong-liang, XUE De-yi, GU Pei-hua. Information entropy method for product adaptable design evaluation[J]. Chinese Journal of Engineering Design, 2021, 28(1): 1-13.
[3] MA Hong-qin, PENG Qing-jin, ZHANG Jian, GU Pei-hua. Assembly sequence planning for open-architecture products[J]. Chinese Journal of Engineering Design, 2015, 22(6): 509-519.
[4] GU Pei-hua， ZHAO Chao， PENG Qing-jin. Evaluation of open-architecture products[J]. Chinese Journal of Engineering Design, 2014, 21(6): 505-512.
[5] CHENG Xian-fu. Adaptability oriented planning method of design parameters for product platform[J]. Chinese Journal of Engineering Design, 2014, 21(2): 140-146.
[6] CHEN Yong-Liang, MAN Jia, QU Yi, BAO Neng-Sheng, GU Pei-Hua. Measurement method and application of adaptability for mechanical products[J]. Chinese Journal of Engineering Design, 2010, 17(1): 1-11.
[7] CHEN Yong-Liang, JIAO Ming-Sheng. Adaptable design of climbing robot based on product platform and mechanical bus[J]. Chinese Journal of Engineering Design, 2005, 12(5): 276-279.