Please wait a minute...
工程设计学报  2016, Vol. 23 Issue (4): 309-315,344    DOI: 10.3785/j.issn.1006-754X.2016.04.002
创新设计     
绳锯线弓角静态测量方法的研究
金闪闪1,2, 邹航1,2, 郭桦1,2
1. 华侨大学 脆性材料加工技术教育部工程研究中心, 福建 厦门 361021;
2. 华侨大学 制造工程研究院, 福建 厦门 361021
Research on static measuring method of wire saw deflection angle
JIN Shan-shan1,2, ZOU Hang1,2, GUO Hua1,2
1. Engineering Research Center for Machining of Brittle Materials of Ministry of Education, Huaqiao University, Xiamen 361021, China;
2. Institute of Manufacturing Engineering, Huaqiao University, Xiamen 361021, China
 全文: PDF(2419 KB)   HTML
摘要:

金刚石绳锯在切割圆弧板材时,受到进给方向的阻力,形成“线弓角”,使板材中部产生“过切”,严重时导致材料报废.为解决这一问题,提出了线弓角的概念,从理论上提出了一种基于悬臂式力传感器的绳锯线弓角的静态测量方法,通过轴力传感器输出的电压值计算出线弓角度.试验在自行设计和搭建的绳锯线弓角测量平台上进行,用钢丝绳模拟串珠绳产生线弓角,并进行导轮受力与线弓角关系的静态测量试验分析,以验证该方法测量线弓角的可行性.试验结果表明:在一定范围内,串珠绳初始张紧力越大,线弓角的计算值越接近理论值.因此,采用所提出的测量方法,当装有轴力传感器的导轮处在刚好与钢丝绳接触的状态下,选择合适的初始张紧力,可以测得较准确的角度值.

关键词: 绳锯轴力传感器线弓角    
Abstract:

When diamond wire saw cuts circular arc, wire saw deflection angle will be formed due to resistance in the feed direction. If the bending is serious enough, the center of the circular plate will be cut excessively and leads to material scrap. In order to solve the problem, wire saw deflection angle is defined. The static measuring methodology of wire saw deflection angle was proposed. This methodology was based on cantilever type axis force sensor. Through the axis force sensor, voltage values were output and recorded to calculate wire saw deflection angle. Static measuring experiments were carried out in the physical equipment designed and built by authors. In the experiments, the steel rope was used to simulate diamond wire saw and created wire saw deflection angle. The static measuring experiments were carried out to study the relationship between the force of guide wheel and wire saw deflection angle. It was found that, the measured angle was close to the theoretical angle with the increase of initial tension within certain range. Therefore, when the edge of guide wheel whose axis assembles the force sensor is just contacted with steel cable, the wire saw deflection angle can be measured relative accurately by this method.

Key words: wire saw    axis force sensor    wire saw deflection angle
收稿日期: 2016-04-08 出版日期: 2016-08-28
CLC:  TH113.21  
基金资助:

国家自然科学基金资助项目(51175193);国家科技支撑计划资助项目(2012BAF13B04);华侨大学研究生科研创新能力培育计划资助项目(1400203013).

通讯作者: 郭桦(1956—),男,湖南常德人,教授,硕士生导师,博士,从事超硬材料及相关设备的研究,E-mail:guoh1214@hqu.edu.cn.     E-mail: guoh1214@hqu.edu.cn
作者简介: 金闪闪(1991—),女,河南商丘人,硕士生,从事高效精密加工研究,E-mail:1400203013@hqu.edu.cn.http://orcid.org//0000-0003-2618-8972
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
金闪闪
邹航
郭桦

引用本文:

金闪闪, 邹航, 郭桦. 绳锯线弓角静态测量方法的研究[J]. 工程设计学报, 2016, 23(4): 309-315,344.

JIN Shan-shan, ZOU Hang, GUO Hua. Research on static measuring method of wire saw deflection angle. Chinese Journal of Engineering Design, 2016, 23(4): 309-315,344.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2016.04.002        https://www.zjujournals.com/gcsjxb/CN/Y2016/V23/I4/309

[1] SPIELVOGEL E. An investigation into the economics of wire saws[J].Industrial Diamond Review,1999,59:178-182.
[2] GARRARD R, PEACOCK S R, HORI M. The future role of diamond in the construction industry[J]. Industrial Diamond Review, 2001(2):121-129.
[3] TÖNSHOFF H K. Diamond tools for wire sawing metal components[J]. Diamond and Related Materials, 2002, 250(3/6):742-748.
[4] WRIGHT D N, ENGELS J A. The environment and cost benefits of using diamond wire for quarrying and processing of natural stone[J]. Industrial Diamond Review, 2003(4):16-24.
[5] 王慧.水下金刚石绳锯机关键技术研究与样机研制[D].哈尔滨:哈尔滨工程大学机电工程学院,2008: 1-8. WANG Hui. Key technology and model machine research on underwater diamond wire saw[D]. Harbin: Harbin Engineering University, School of Mechanical and Electrical Engineering, 2008: 1-8.
[6] 王飞,张进生,王志.金刚石串珠绳锯锯切技术研究现状与发展[J].金刚石与磨料磨具工程,2013,33(1):36-42. WANG Fei, ZHANG Jin-sheng, WANG Zhi. Current situation and development of diamond wire saw cutting technology[J]. Diamond & Abrasives Engineering, 2013,33(1):36-42.
[7] 刘宝昌,张祖培,孙友宏,等.金刚石绳锯的锯切轨迹及锯切机理研究[J].金刚石与磨料磨具工程,2002(6): 17-20. LIU Bao-chang, ZHANG Zu-pei, SUN You-hong, et al. Research on sawing trajectory and mechanism of diamond wire saw[J]. Diamond & Abrasives Engineering, 2002(6): 17-20.
[8] 张进生,王志,黄波,等.金刚石串珠锯在花岗岩高效回采中的应用[J].金刚石与磨料磨具工程,2004(6):12-15. ZHANG Jin-sheng, WANG Zhi, HUANG Bo, et al. Application research of diamond wire-saw in high efficiency quarrying of granite[J]. Diamond & Abrasives Engineering, 2004(6):12-15.
[9] 章兼植.金刚石串珠绳锯的受力分析[J].石材,2005(1): 38-43. ZHANG Jian-zhi. Analysis of the force of diamond wire saw[J].Stone, 2005(1): 38-43.
[10] 黄国钦,黄辉,郭桦,等.串珠绳锯切花岗石过程中锯切参数对锯切力和能耗的影响[J].机械工程学报,2009,45(3):234-239. HUANG Guo-qin, HUANG Hui, GUO Hua, et al. Influences of sawing parameters on forces and energy in wire sawing of granite[J]. Journal of Mechanical Engineering, 2009,45(3):234-239.
[11] TURCHETTA S. Cutting force and diamond tool wear in stone machining[J]. International Journal of Advanced Manufacturing Technology,2012,61(5/8):441-448.
[12] 王海波,张岚,孟庆新,等.水下绳锯机切割油气管道锯切参数优化研究[J].机床与液压,2016,44(7):36-39. WANG Hai-bo, ZHANG Lan, MENG Qing-xin, et al. Sawing parameters optimization study of underwater wire saw cutting oil and gas pipelines[J]. Machine Tool & Hydraulics, 2016,44(7):36-39.
[13] LIEDKE T, KUNA M. A macroscopic mechanical model of the wire sawing process[J]. International Journal of Machine Tools & Manufacture, 2011,51(9):711-720.
[14] TEOMETE E. Investigation of long waviness induced by the wire saw process[J]. Proceedings of the Institution of Mechanical Engineers, Prat B: Journal of Engineering Manufacture, 2011, 225(7):1153-1162.
[15] 闰先华.怎样提高金刚石异型绳锯机的加工精度[J].石材,2013(2):18-19. RUN Xian-hua. How to improve the machining precision of diamond wire saw machine in special shape cutting[J].Stone,2013(2):18-19.
[16] TURCHETTA S, POLINI W, GELFUSA G, et al. A new sawing machine by diamond wire[J]. The International Journal of Advanced Manufacturing Technology, 2014, 70(1/4): 73-78.
[17] 刘玉辉.钢绳绳内在特性和力学性能研究[D].太原:太原理工大学机械工程学院,2014: 2-5. LIU Yu-hui. Research on inherent properties and mechanical performances of wire rope[D]. Taiyuan: Taiyuan University of Technology, School of Mechanical Engineering, 2014: 2-5.
[18] 倪松远.钢丝绳机械性质的研究[D].哈尔滨:东北林业大学工程技术学院,2004: 11-12,47. NI Song-yuan. The study of the steel wire rope mechanical character[D]. Harbin: Northeast Forestry University, College of Engineering and Technology, 2004: 11-12,47.

No related articles found!