Please wait a minute...
工程设计学报  2021, Vol. 28 Issue (6): 701-708    DOI: 10.3785/j.issn.1006-754X.2021.06.005
保质设计     
碳刷研磨成形去除模型构建与验证
毛君, 田博, 谢苗, 李玉岐
辽宁工程技术大学 机械工程学院, 辽宁 阜新 123000
Construction and verification of removal model for carbon brush grinding and forming
MAO Jun, TIAN Bo, XIE Miao, LI Yu-qi
School of Mechanical Engineering, Liaoning Technical University, Fuxin 123000, China
 全文: PDF(1744 KB)   HTML
摘要: 为研究碳刷研磨装置的研磨精度,以自主研制的碳刷研磨装置为平台,基于Archard模型构建了碳刷研磨成形去除模型,并得到了碳刷研磨成形去除率预测公式,从而获得了横、纵向所需去除长度不同的碳刷的研磨次数。然后,基于所研制的碳刷研磨装置,开展了碳刷研磨成形正交实验以及碳刷研磨成形去除模型验证实验。结果表明,对碳刷研磨成形效果产生影响的因素按影响程度从大到小排序,依次为压下弹簧弹性系数、砂纸目数、砂轮步进电机脉冲频率;基于建立的去除率预测公式所获得的碳刷研磨次数较为准确,可保证碳刷的研磨效率。研究结果为不同型号碳刷研磨装置的进一步研发提供了理论指导和实验依据。
Abstract: In order to study the grinding accuracy of the carbon brush grinding device, taking the self-developed carbon brush grinding device as the platform, the carbon brush grinding and forming removal model was constructed based on the Archard model, and the prediction formula of carbon brush grinding and forming removal rate was obtained, so as to obtain the grinding times of carbon brushes with different removal lengths in the transverse and longitudinal directions. Then, based on the developed carbon brush grinding device, the orthogonal experiment of carbon brush grinding and forming and the verification experiment of carbon brush grinding and forming removal model were carried out. The results showed that the factors affecting the grinding and forming effect of carbon brush were sorted in descending order of the influence degree, followed by the elastic coefficient of compression spring, the mesh number of sandpaper and the pulse frequency of grinding wheel stepping motor; the carbon brush grinding times obtained based on the established removal rate prediction formula were more accurate, which could ensure the grinding efficiency of carbon brushes. The research results provide theoretical guidance and experimental basis for the further development of different types of carbon brush grinding devices.
收稿日期: 2021-02-01 出版日期: 2021-12-28
CLC:  TH 117  
基金资助: 国家自然科学基金面上项目(51774162,51874158)
作者简介: 毛 君(1960—),男,辽宁岫岩人,教授,博士生导师,博士,从事机械智能装备、机械设计及理论研究,E-mail:13704181080@139.com,https://orcid.org/0000-0002-1253-5139;
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

毛君, 田博, 谢苗, 李玉岐. 碳刷研磨成形去除模型构建与验证[J]. 工程设计学报, 2021, 28(6): 701-708.

MAO Jun, TIAN Bo, XIE Miao, LI Yu-qi. Construction and verification of removal model for carbon brush grinding and forming. Chinese Journal of Engineering Design, 2021, 28(6): 701-708.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2021.06.005        https://www.zjujournals.com/gcsjxb/CN/Y2021/V28/I6/701

[1] 何涛, 陈强曼, 陈国瑜, 王传礼, 黄森, 沈浩. 滑动摩擦副表面变织构的润滑与承载特性研究[J]. 工程设计学报, 2021, 28(5): 585-593.
[2] 于如飞, 寇鑫, 陈渭. 基于CFD的新型表面织构仿真分析[J]. 工程设计学报, 2021, 28(4): 466-472.
[3] 黄传辉, 张宁, 刘磊. 回转支承不同材料隔离体使用性能对比分析[J]. 工程设计学报, 2020, 27(1): 128-134.
[4] 章亦聪, 朱玮, 吴玉国, 时礼平. 莱洛三角形微孔织构化端面密封性能数值模拟[J]. 工程设计学报, 2020, 27(1): 103-110.
[5] 张旭, 刘素梅, 丁开忠, 陆坤. ITER真空绝热冷质支撑性能测试平台设计与研究[J]. 工程设计学报, 2020, 27(1): 121-127.
[6] 冯伟, 李美威, 贺石中, 谢小鹏. 大型水轮机组推力轴承油膜厚度在线监测研究[J]. 工程设计学报, 2019, 26(6): 652-657.
[7] 唐东林, 李茂扬, 丁超, 魏子兵, 胡琳, 袁波. 轮式爬壁机器人转向稳定性研究[J]. 工程设计学报, 2019, 26(2): 153-161.
[8] 冯 伟, 贺石中. 摩擦学系统特征信息关系的试验研究[J]. 工程设计学报, 2011, 18(4): 288-292.
[9] 彭晋民, 罗敏峰. 水润滑塑料合金轴承设计参数实验分析及优化[J]. 工程设计学报, 2010, 17(3): 196-200.
[10] 牛荣军, 刘红彬, 黄平. 磁头局部结构的优化设计和数值分析[J]. 工程设计学报, 2010, 17(2): 114-118.
[11] 贾利晓, 张永振, 牛永平, 李健, 孙乐民. 人体步进摩擦的研究现状[J]. 工程设计学报, 2010, 17(1): 61-65.