Please wait a minute...
工程设计学报
工程设计学报  2018, Vol. 25 Issue (5): 590-596    DOI: 10.3785/j.issn.1006-754X.2018.05.014
整机和系统设计     
基于试验台架的轮胎测温系统研究
王恒1, 孙小明2, 邵彦2, 肖后昆2, 张小龙1
1. 安徽农业大学 工学院, 安徽 合肥 230036;
2. 安徽佳通乘用子午线轮胎有限公司, 安徽 合肥 230601
Research on tire temperature measurement system based on test bench
WANG Heng1, SUN Xiao-ming2, SHAO Yan2, XIAO Hou-kun2, ZHANG Xiao-long1
1. School of Engineering, Anhui Agricultural University, Hefei 230036, China;
2. Anhui Giti Passenger Radial Tire Co., Ltd., Hefei 230601, China
 全文: PDF(4374 KB)   HTML
摘要：

为了实现实时采集、监测轮胎胎冠内部温度，设计了基于试验台架的滚动轮胎的测温系统。以热敏电阻为温度传感器，基于NI cRIO-9033控制器和NI 9205模拟信号采集模块搭建数据采集器，使用MSC SR20M滑环连接温度传感器与数据采集器，在LabVIEW开发环境中，通过编写并运行多通道数据采集与实时数据处理程序，实现了轮胎胎冠内部多个测点温度数据的实时采集与处理。另外，为应对极限试验工况，针对滑环设计制作了滑环保护罩。试验结果表明：轮胎测温系统运行可靠，能够实现多通道的轮胎温度数据采集；设计制作的滑环保护罩能够有效地保护轮胎测温系统，使它在极限试验工况下免受损坏。研究结果表明该轮胎测温系统是实时获取滚动轮胎温度数据的有效工具，具有广阔的工程应用前景。
关键词： 轮胎温度;  多通道测量;  测试系统;  滑环    
Abstract:

In order to collect and monitor the inner temperature at the rolling tire crown in real time, a tire temperature measurement system based on the test bench was designed. In this system, thermistors were used as temperature sensors, the data collector was built based on NI cRIO-9033 controller and NI 9205 analog signal acquisition module, and MSC SR20M slip ring was used to connect the temperature sensor and data collector. The real-time collection and processing of temperature data of multiple measurement points inside the tire crown was realized by writing and running multi-channel data collection and real-time data processing program in the LabVIEW development environment. In addition, in order to cope with extreme test conditions, the sliding ring protective cover was designed and manufactured. The experimental results showed that the tire temperature measurement system was reliable and could realize multi-channel tire temperature data collection; the sliding ring protective cover could effectively protect the tire temperature measuring system from damage under extreme test conditions. The tire temperature measurement system is the efficient instrument to get rolling tire temperature data in real time, and it has broad engineering application prospect.
Key words: tire temperature    multi-channel measurement    test system    slip ring
收稿日期: 2017-09-11 出版日期: 2018-10-28
CLC:  TH873  
基金资助:

国家自然科学基金资助项目（51675005）；安徽省自然科学基金资助项目（1608085ME109）
通讯作者: 张小龙(1976-),男,安徽芜湖人,教授,博士,从事车辆测控与动力学研究,E-mail:xlzhang@ahau.edu.cn     E-mail: xlzhang@ahau.edu.cn
作者简介: 王恒(1992-),男,安徽阜阳人,硕士生,从事虚拟测试系统研究,E-mail:18756010845@qq.com,https://orcid.org/0000-0001-9889-680X
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
王恒
孙小明
邵彦
肖后昆
张小龙

引用本文:

王恒, 孙小明, 邵彦, 肖后昆, 张小龙. 基于试验台架的轮胎测温系统研究[J]. 工程设计学报, 2018, 25(5): 590-596.

WANG Heng, SUN Xiao-ming, SHAO Yan, XIAO Hou-kun, ZHANG Xiao-long. Research on tire temperature measurement system based on test bench[J]. Chinese Journal of Engineering Design, 2018, 25(5): 590-596.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2018.05.014    或    https://www.zjujournals.com/gcsjxb/CN/Y2018/V25/I5/590

[1] 王晓军.子午线轮胎温度场有限元分析与测试[D].合肥:中国科学技术大学工程科学学院,2004:1-2. WANG Xiao-jun. Finite element analysis and test of temperature field of radial tire[D]. Hefei:University of Science and Technology of China, School of Engineering Science, 2004:1-2.
[2] 马连湘.滚动轮胎温度场的理论与实验研究[D].武汉:华中科技大学能源与动力工程学院,2001:9-10. MA Lian-xiang. Theoretical and experimental research on rolling tire temperature field[D]. Wuhan:Huazhong University of Science and Technology,School of Energy and Power Engineering, 2001:9-10.
[3] CONANT F S. Tire temperature[J]. Rubber Chemistry and Technology, 1971, 44(2):397-439.
[4] OH B S, KIM Y N, KIM N J, et al. Internal temperature distribution in a rolling tire[J]. Tire Science and Technology, 1995, 23(1):11-25.
[5] 李杰,赵旗,王庆年,等.高速滚动轮胎单向实时红外测温系统的研究[J].农业机械学报,2003,34(5):134-136. LI Jie, ZHAO Qi, WANG Qing-nian, et al. Real-time infrared measurement system for one directional surface temperature of a high rolling automobile tire[J]. Transactions of the Chinese Society for Agricultural Machinery, 2003, 34(5):134-136.
[6] GUO Xue-liang, ZUO Shu-guang, LI Yong. Analysis of the tire temperature distribution based on tests[J]. Applied Mechanics and Materials, 2012, 130-134:2766-2769.
[7] GLEMMING D A. Tire testing for rolling resistance and fuel economy[J]. Tire Science and Technology, 1975, 2(4):286-311.
[8] 赵子亮,王庆年,李杰,等.基于滚动状态轮胎温度场的稳态热分析[J].机械工程学报,2001,37(5):30-34. ZHAO Zi-liang, WANG Qing-nian, LI Jie, et al. Steady state thermal analysis on temperature field of tire based on rolling state[J]. Journal of Mechanical Engineering, 2001, 37(5):30-34.
[9] 王泽鹏,高峰,徐国艳,等.汽车轮胎温度场影响因素建模与试验分析[J].农业机械学报,2007,38(9):37-41. WANG Ze-peng, GAO Feng, XU Guo-yan, et al. Modeling and numerical analysis of temperature field of automobile tire and its influencing factors[J]. Transactions of the Chinese Society for Agricultural Machinery, 2007, 38(9):37-41.
[10] XU Wei, ZHAO Yan-hua, LIU Ming-yu, et al. Design and implementation of data management system for low-voltage electrical performance test based on virtual instrument technology[J]. Applied Mechanics and Materials, 2014, 556-562:2145-2148.
[11] 王彦晓,余有龙,高灿辉,等.基于光纤滑环的旋转部件温度测量[J].中国激光,2014,41(8):214-219. WANG Yan-xiao, YU You-long, GAO Can-hui, et al. Temperature measurement for rotating parts based on the fiber-optic slip ring[J]. Chinese Journal of Lasers,2014, 41(8):214-219.
[12] 张永军,姚石,于朋扬.导电滑环机械性能测试设备研制[J].哈尔滨理工大学学报,2016,21(5):13-19. ZHANG Yong-jun, YAO Shi,YU Peng-yang. The development of conductive ring mechanical performance test equipment[J]. Journal of Harbin University of Science and Technology, 2016, 21(5):13-19.
[13] 吴媞,刘鹏飞,张小龙.拖拉机经济性虚拟综合测试系统设计与试验[J].农业机械学报,2016,47(3):117-123. WU Ti, LIU Peng-fei, ZHANG Xiao-long. Design and field test of integrated virtual test system for tractor economy performance[J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(3):117-123.
[14] 吴福麒,李子然,夏源明.不同载荷和初始气压下滚动轮胎稳态温度场的测试与有限元分析[J].工程力学,2008,25(1):54-60,70. WU Fu-qi, LI Zi-ran, XIA Yuan-ming. Experiment and finite element analysis of steady-state temperature distribution in rolling tire under different loads and initial inflation pressures[J]. Engineering Mechanics, 2008, 25(1):54-60, 70.
[1] 刘祖凡, 祖静, 崔春生, 马铁华. 射孔枪枪内压力测试系统的研究[J]. 工程设计学报, 2011, 18(5): 378-381.
[2] 李功燕, 范俊, 刘向阳, 杨克己. 基于ARM核芯片的嵌入式电动头性能测试系统[J]. 工程设计学报, 2003, 10(3): 144-148.
[3] 姜继海, 胡志栋. 静压滑环及其应用研究[J]. 工程设计学报, 2002, 9(3): 119-123.