Please wait a minute...
工程设计学报  2017, Vol. 24 Issue (3): 311-316    DOI: 10.3785/j.issn.1006-754X.2017.03.010
建模、分析、优化和决策     
强振动下比例电磁铁输出力特性研究
刘瑞春1, 张怀亮1,2
1. 中南大学 机电工程学院, 湖南 长沙 410083;
2. 中南大学 高性能复杂制造国家重点实验室, 湖南 长沙 410083
Study of the output force characteristics of proportional solenoid with strong vibration
LIU Rui-chun1, ZHANG Huai-liang1,2
1. College of Mechanical and Electrical Engineer, Central South University Changsha 410083, China;
2. State Key Laboratory of High Performance and Complex Manufacturing, Central South University Changsha 410083, China
 全文: PDF(1453 KB)   HTML
摘要:

为研究强振动对比例电磁铁输出力特性的影响,应用电磁场理论和强迫振动理论建立了强振动环境下比例电磁铁的动态数学模型和仿真模型,仿真分析了不同振动参数下比例电磁铁的气隙磁阻、动生感应电动势及输出力的变化规律,讨论了强振动对电磁铁输出力的影响原理。同时分析了衔铁质量、阻尼系数、弹簧刚度对比例电磁铁输出力波动的影响规律。结果表明:强振动幅值和频率与电磁铁的动生感应电动势的波动幅值正相关;比例电磁铁的气隙磁阻和输出力的波动幅值与强振动幅值呈线性正相关;随阻尼系数的增加,比例电磁铁输出力的波动幅值近似线性减小;弹簧刚度小于20 000 N/m时比例电磁铁的输出力波动幅值随刚度增加而快速减小。研究结果为提高振动环境下比例元件的工作性能提供了理论参考。

关键词: 比例电磁铁强振动输出力动生感应电动势气隙磁阻阻尼系数弹簧刚度    
Abstract:

To study the output force characteristics of proportional solenoid under the strong vibration, the dynamic mathematical model and simulation model were established by using the electromagnetic field theory and forced vibration theory. The gap reluctance, motional electromotive force and the output force under different vibration parameters were studied by simulations, and the influence principle of strong vibration on the output force was discussed. Meanwhile, the output force fluctuation caused by the change of armature quality, damping coefficient and spring sitffness was analyzed under the strong vibration. Results indicated that the amplitude and frequency of vibration and motional electromotive force fluctuation amplitude were positive related, the output force fluctuation amplitude and gap reluctance were linear positive with vibration amplitude. The output force fluctuation amplitude decreased approximately linearly with the increase of the damping coefficient under the strong vibration. When the spring stiffness was smaller than 20 000 N/m, the output force fluctuation amplitude decreased rapidly with the increased of the spring stiffness. The results can provide the theoretical reference for improving the performance of the proportional components under the vibration environment.

Key words: proportional solenoid    strong vibration    output force    motional induction electromotive force    gap reluctance    damping coefficient    spring stiffness
收稿日期: 2016-08-15 出版日期: 2017-06-28
CLC:  TH137  
基金资助:

国家重点基础研究发展计划(973计划)资助项目(2013CB035400)

通讯作者: 张怀亮(1964-),男,湖南长沙人,教授,博士生导师,博士,从事液压动力学与摩擦学研究,E-mail:zhl2001@csu.edu.cn,http://orcid.org//0000-0002-2579-2919     E-mail: zhl2001@csu.edu.cn
作者简介: 刘瑞春(1990-),男,江西抚州人,硕士生,从事液压元件动力学研究,E-mail:lrchyh@126.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
刘瑞春
张怀亮

引用本文:

刘瑞春, 张怀亮. 强振动下比例电磁铁输出力特性研究[J]. 工程设计学报, 2017, 24(3): 311-316.

LIU Rui-chun, ZHANG Huai-liang. Study of the output force characteristics of proportional solenoid with strong vibration[J]. Chinese Journal of Engineering Design, 2017, 24(3): 311-316.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2017.03.010        https://www.zjujournals.com/gcsjxb/CN/Y2017/V24/I3/311

[1] 陈立和.浅析机械应用中的TBM与液压系统[J].吉林省教育学院学报(学科版), 2011, 40(2): 138-139. CHEN Li-he. A brief analysis of TBM and hydraulic system in mechanical applications[J].Journal of Jilin Institute of Education (Science Edition), 2011, 40(2): 138-139.
[2] LI X H, YU H B, YUAN M Z, et al. Study on the linear dynamic model of shield TBM cutter head driving system[C]//IECON 2011-37th Annual Conference on IEEE Industrial Electronics Society. Melbourne, Nov.7-10, 2011.
[3] 许益民.电液比例控制系统分析与设计[M].北京: 机械工业出版社, 2005: 26-50. XU Yi-ming.Electro-hydraulic proportional control system analysis and design[M].Beijing: China Machine Press, 2005: 26-50.
[4] 路甬祥, 胡大紘.电液比例控制技术[M].北京: 机械工业出版社, 1988: 12-40. LU Yong-xiang, HU Da-yong.Electro-hydraulic proportional control technology[M].Beijing: China Machine Press, 1988: 12-40.
[5] 申屠胜男, 徐龙稳, 孟彬, 等.双向比例电磁铁的设计及仿真分析[J].机械设计与研究, 2015, 31(1): 27-30. SHENTU Sheng-nan, XU Long-wen, MENG Bing, et al. Design and simulation analysis of bidirectional proportional electromagnet[J]. Journal of Mechanical Design and Research, 2015, 31(1): 27-30.
[6] 孟彬, 阮健, 李胜.低惯量旋转电磁铁的动态特性研究[J].中国机械工程, 2011, 22(20): 2407-2410. MENG Bing, RUAN Jian, LI Sheng. Research on dynamic characteristics of rotary electromagnet with low inertia [J].China Mechanical Engineering, 2011, 22(20): 2407-2410.
[7] SCHULTZ A. Design of valve solenoids using the method of finite elements[J]. Power Transmission and Motion Control, 2005, 56(12): 243-254.
[8] YONG Li, FAN Ding, JIAN Cui, et al. Low power linear actuator for direct drive electrohydraulic valves[J]. Journal of Zhejiang University-SCIENCE A, 2008, 9(7): 940-943.
[9] ENCICA L, PAULIDES J J H, LOMONOVA E, et al. Electromagnetic and thermal design of a linear actuator using output polynomial space mapping[J]. IEEE Transactions on Industry Applications, 2008, 44(2): 534-542.
[10] KARUNANIDHI S, SINGAPERUMAL M.Mathematical model and experimental characterization of a high dynamic servo valve integrated with piezoelectric actuator[J].Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2010, 224(4): 419-435.
[11] 王传礼.基于GMM转换器喷嘴挡板伺服阀的研究[D].杭州: 浙江大学机械工程学院, 2005: 1-26. WANG Chuan-li. Research on the nozzle flapper servo valve driven by GMM actuator[D]. Hangzhou: Zhejiang University, College of Mechanical Engineering, 2005: 1-26.
[12] MAJID Ghassemi, YASSER Molayi Barsi, MOHAMMAD Hossein Hamedi. Effect of armature design on thermal and electromagnetic distribution of an electromagnetic launcher[J].Heat Transfer Engineering, 2008, 29(9): 839-844.
[13] 杨征瑞, 花克勤, 徐轶.电液比例与伺服控制[M].北京: 冶金工业出版社, 2009: 150-155. YANG Zheng-rui, HUA Ke-qing, XU Yi.Electro-hydraulic proportional and servo control[M].Beijing: Metallurgical Industry Press, 2009: 150-155.
[1] 米鑫,李虹,郭彦青,高宏伟,王浩楠,宁羿帆. 基于线性回归的单柱塞泵单向阀参数优化[J]. 工程设计学报, 2022, 29(6): 705-712.
[2] 赵凯平, 何涛, 王传礼, 史瑞. 双弹簧电液激振缸振幅补偿性能的研究[J]. 工程设计学报, 2021, 28(6): 737-745.