Please wait a minute...
工程设计学报  2015, Vol. 22 Issue (1): 66-71    DOI: 10.3785/j.issn. 1006-754X.2015.01.011
建模、分析、优化和决策     
轮式装载机驾驶室噪声源分离和识别
刘宏骏,毕凤荣,张剑
天津大学 机械工程学院,天津 300072
Separation and identification of noise source at wheel loader's cab
LIU Hong-jun, BI Feng-rong, ZHANG Jian
College of Mechanical Engineering, Tianjin University, Tianjin 300072, China
 全文: PDF(3599 KB)   HTML
摘要: 为了改善装载机的噪声状况,提高产品的噪声分析技术水平及产品市场竞争力,采用鲁棒独立分量分析(RobustICA)的方法,对ZL50轮式装载机驾驶室噪声进行了声源识别的研究.主要采用RobustICA算法对测得的驾驶室噪声信号进行了盲源分离,得到一系列独立的噪声分量,利用连续小波变换和相干分析对分离得到的各独立分量进行了分析,时频分析和相干分析结果确定了分离得到的各独立分量和不同噪声源的对应关系.结果表明,采用该方法分离得到的独立分量分别对应着装载机的排气噪声和风扇噪声,且两者为司机耳旁噪声的主要成分.验证了鲁棒独立分量分析在声源分离和识别领域的优越性.
关键词: 装载机驾驶室噪声鲁棒独立分量分析小波变换    
Abstract: In order to ameliorate the noise condition of the wheel loader, optimize the level of noise analysis technology and improve product competitiveness, a study on identifying the noise source from the cab of the ZL50 wheel loader based on the robust independent component analysis (RobustICA) was carried out. The RobustICA was adopted to separate noise signals of the cab and a series of independent components were obtained. Wavelet transform and coherence analysis were used to analyze these independent components. From the results of time-frequency analysis and correlation analysis, the corresponding relationship was determined. Results showed that these independent components corresponded to exhaust noise and fan noise of the loader which constituted the ingredients of the noise near driver’s ear. The superiority of RobustICA is verified using in the field of sound source separation and identification.
Key words: loader    cab    noise    robust independent component analysis    wavelet transform
收稿日期: 2014-09-11 出版日期: 2015-02-28
作者简介: 刘宏骏(1990—),男,河北保定人,硕士生,从事车辆振动与噪声控制研究,E-mail:hjliu@tju.edu.cn. 通信联系人:毕凤荣,副教授,从事车辆振动与噪声控制研究,E-mail:fr_bi@tju.edu.cn.
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

刘宏骏,毕凤荣,张 剑. 轮式装载机驾驶室噪声源分离和识别[J]. 工程设计学报, 2015, 22(1): 66-71.

LIU Hong-jun, BI Feng-rong, ZHANG Jian. Separation and identification of noise source at wheel loader's cab. Chinese Journal of Engineering Design, 2015, 22(1): 66-71.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn. 1006-754X.2015.01.011        https://www.zjujournals.com/gcsjxb/CN/Y2015/V22/I1/66

[1] 张宪旭, 刘怡然, 李丽君. 基于Helmholtz共振腔阵列的声学超材料研究[J]. 工程设计学报, 2020, 27(4): 441-447.
[2] 王雅坤, 任家骏, 李爱峰, 孟浩南. 矿用挖掘机驾驶室操作界面的布局优化设计[J]. 工程设计学报, 2020, 27(4): 469-477.
[3] 汤亮, 何仁杰, 龚发云, 李飞扬, 刘冠军, 杨敏. 变风载下风电齿轮箱内部激励规律研究及动态特性优化[J]. 工程设计学报, 2020, 27(2): 212-222.
[4] 杨宇涛, 祝锡晶, 张青青, 刘泽宇. 多级柔性壁声衬设计及其消声性能研究[J]. 工程设计学报, 2018, 25(5): 518-524.
[5] 刘文, 张晋红, 林腾蛟, 杨云, 蔡云龙. 三支点桥式起重机结构噪声预估及其影响因素研究[J]. 工程设计学报, 2017, 24(5): 580-587,594.
[6] 李晓豁,石峥嵘,吕良玉,吴 云. 矿用挖掘式装载机铲斗铲取散体煤岩随机载荷的模拟[J]. 工程设计学报, 2014, 21(4): 329-333.
[7] 雷飞,杨红波. 基于模糊控制的商用车驾驶室悬置有限带宽主动控制系统研究[J]. 工程设计学报, 2014, 21(1): 32-37.
[8] 孙万麟, 黄玉划, 山拜·达拉拜. 利用欠阻尼二阶线性随机共振抑噪的模型设计及实现[J]. 工程设计学报, 2010, 17(5): 360-364.
[9] 沈晓安. 基于提升小波变换的超声信号消噪技术[J]. 工程设计学报, 2009, 16(3): 227-229.
[10] 沈晓安, 杨克己. 基于小波变换的裂谱分析法[J]. 工程设计学报, 2008, 15(5): 361-364.
[11] 杨克己, 方文平, 乔华伟, 黄一春. 基于复小波变换和支持向量机的缺陷类型识别[J]. 工程设计学报, 2008, 15(3): 182-186.
[12] 乔华伟, 杨克己.  基于小波变换的反卷积技术[J]. 工程设计学报, 2007, 14(5): 369-373.
[13] 杨克己. 一种改进型裂谱分析方法[J]. 工程设计学报, 2000, 7(4): 131-133.