Please wait a minute...
工程设计学报
工程设计学报  2014, Vol. 21 Issue (5): 418-425    DOI: 10.3785/j.issn. 1006-754X.2014.05.003
组合化与系列化设计     
水下摩擦叠焊机可适应架构设计方法
陈永亮，刘谱，刘玉坤
天津大学 机械工程学院，天津 300072
Adaptable architecture design of underwater friction stitch welding machine
CHEN Yong-liang， LIU Pu， LIU Yu-kun
School of Mechanical Engineering， Tianjin University， Tianjin 300072， China
 全文: PDF(2255 KB)   HTML
摘要： 为提高水下摩擦叠焊机对海洋管状物修复的适应能力和响应速度，将可适应设计引入叠焊机的设计过程中.针对机械产品功能变化的特点，在需求分析和功能分析的基础上，通过扩展功能结构图来表达可适应产品的可适应性；结合开放式架构的设计理念，明确产品的基础平台、功能模块及其接口，以便用户根据需求选择模块配置；提出了基于集合的产品可适应性评价方法，为评价方案的优劣提供量化指标.以水下摩擦叠焊机产品族设计为例，表明该方法具有较好的实用性和可操作性，可用于产品的开发和设计.
关键词： 快速响应;  开放式架构;  功能结构图;  可适应性评价;  可适应设计    
Abstract: To improve the adaptability and response speed of the underwater friction stitch welding machine for repairing pipe like ocean structures, the adaptable design method is introduced into the design process of friction stitch welding machine. According to the characteristics of function changes on mechanical products, the function structure diagram was extended to show the adaptability of the adaptable product based on the requirement analysis and function analysis. The basic platform, function modules and interfaces were defined combining with the idea of openarchitecture design, so that users could configure modules according to their requirements. A setbased method of adaptability evaluation was developed to evaluate design quality. The underwater friction stitch welding machine was studied which indicated that this method performs well in practicability and operability and could be used in the practice of product design and development.
Key words: rapid respond    open-architecture    functional structure     evaluation of adaptability    adaptable design
收稿日期: 2014-03-10 出版日期: 2014-10-28
基金资助:

国家高技术研究发展计划(863计划)资助项目(2011AA090302)
作者简介: 陈永亮（1972－）,男,安徽宿州人,副教授,博士,从事机械产品现代设计方法研究,E-mail:chenyongliang@tju.edu.cn.
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
陈永亮
刘谱
刘玉坤

引用本文:

陈永亮，刘谱，刘玉坤. 水下摩擦叠焊机可适应架构设计方法[J]. 工程设计学报, 2014, 21(5): 418-425.

CHEN Yong-liang， LIU Pu， LIU Yu-kun. Adaptable architecture design of underwater friction stitch welding machine. Chinese Journal of Engineering Design, 2014, 21(5): 418-425.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn. 1006-754X.2014.05.003    或    https://www.zjujournals.com/gcsjxb/CN/Y2014/V21/I5/418

[1] 马红琴，彭庆金，张 健，顾佩华. 开放式构架产品装配序列规划[J]. 工程设计学报, 2015, 22(6): 509-519.
[2] 刘 伟，曹国忠，郭德斌，邢锡金. 基于多元仿生的快速响应设计研究[J]. 工程设计学报, 2015, 22(1): 1-10.