Please wait a minute...
工程设计学报
工程设计学报  2014, Vol. 21 Issue (5): 412-417    DOI: 10.3785/j.issn. 1006-754X.2014.05.002
保质设计     
高速导带式数码印花机故障模式、影响及危害度分析
钟立强1，陈文华1，潘骏1，李湘生1，何增良2
1.浙江理工大学 浙江省机电产品可靠性技术研究重点实验室，浙江 杭州 310018;
2.杭州宏华数码科技股份有限公司，浙江 杭州 310000
Failure mode, effect and criticality analysis of the high-speed belt guide digital inkjet printing machine
ZHONG Li-qiang1, CHEN Wen-hua1, PAN Jun1, LI Xiang-sheng1, HE Zeng-liang2
1.Zhejiang Provinces Key Laboratory of Reliability Technology for Mechanical & Electrical Product， Zhejiang SciTech University， Hangzhou 310018， China；
2.Hangzhou Honghua Digital Technology Stock Co.， Ltd.， Hangzhou 310000， China
 全文: PDF(987 KB)   HTML
摘要： 导带式数码印花机发生故障，一方面影响企业生产进度，另一方面导致坯布打印失败而产生浪费，致使企业财产损失.为了降低机器故障率、减少财产损失，针对高速导带式数码印花机所有可能的故障，应用故障模式、影响及危害度分析（failure mode，effects and criticality analysis，FMECA）方法对其进行可靠性分析，找出了其薄弱环节为导带传送装置、喷墨打印装置、喷头清洗装置，得到了故障模式、影响及危害度分析表（FMECA表）.并以此为基础，对危害度较大的故障模式给出了检修与日常维护建议，为企业制定高速导带式数码印花机的检修、保养策略提供依据，也为高速导带式数码印花机的可靠性设计提供基础，有利于提高其可靠性.
关键词： 高速导带式数码印花机;  故障模式影响分析;  危害度分析;  维护策略    
Abstract: If belt guide digital printing machine faults, the production schedule will be slowed down and the grey cloth will failure to print which result in the enterprise property losses. In order to reduce the machine fault rate and the property losses，aimed at all kinds of possible faults of the highspeed belt guide digital inkjet printing machine，the fault mode，effect and criticality analysis method was applied to analyze the machine’s reliability. The weak links were found out including the conduction band transmission device，inkjet printer，nozzle cleaning device. The list of the fault modes，effects and criticality of the machine(the list of FMECA) was established. The routine maintenance and repairing suggestions for the highspeed belt guide digital inkjet printing machine was proposed based on the FMECA list and to the more critical fault modes. The work can be used as a reference in enterprise to make repair and maintenance strategy of the machine and can provide basis for the reliability design of the machine.
Key words: high-speed belt guide digital inkjet printing machine    failure mode and effect analysis    criticality analysis    maintenance strategy
收稿日期: 2014-05-16 出版日期: 2014-10-28
基金资助:

浙江省重点科技创新团队计划资助项目（2010R50005）
作者简介: 钟立强（1989—），男，江西赣州人，硕士生，从事机电产品可靠性研究，E-mail：13588207479@163.com. 通信联系人：陈文华（1963—），男，教授，博士生导师，从事机电产品可靠性等研究，E-mail：chenwh@zstu.edu.cn.
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
钟立强
陈文华
潘骏
李湘生
何增良

引用本文:

钟立强,陈文华,潘骏,李湘生,何增良. 高速导带式数码印花机故障模式、影响及危害度分析[J]. 工程设计学报, 2014, 21(5): 412-417.

ZHONG Li-qiang, CHEN Wen-hua, PAN Jun, LI Xiang-sheng, HE Zeng-liang. Failure mode, effect and criticality analysis of the high-speed belt guide digital inkjet printing machine. Chinese Journal of Engineering Design, 2014, 21(5): 412-417.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn. 1006-754X.2014.05.002    或    https://www.zjujournals.com/gcsjxb/CN/Y2014/V21/I5/412

No related articles found!