工程设计理论、方法与技术 |
|
|
|
|
基于图像反馈的CNG车载瓶底加工刀具路径误差补偿技术 |
姚荣庆1,2,陆国栋1, 王进1,黄召亮1 |
1.浙江大学 流体传动及控制国家重点实验室,浙江 杭州 310027;
2. 浙江机电职业技术学院 机械工程系,浙江 杭州 310053 |
|
Compensate technique for tool path error of processing CNGbottles bottom based on image feedback |
YAO Rongqing1,2, LU Guodong1, WANG Jin1, HUANG Zhaoliang1 |
1. State Key Lab of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China;2. Department of Mechanical Engineering, Zhejiang Institute of Mechanical & Electrical Engineering, Hangzhou 310053, China |
引用本文:
姚荣庆, 陆国栋, 王进, 黄召亮. 基于图像反馈的CNG车载瓶底加工刀具路径误差补偿技术[J]. 工程设计学报, 2011, 18(5): 332-336.
YAO Rong-Qing, LU Guo-Dong, WANG Jin, HUANG Zhao-Liang. Compensate technique for tool path error of processing CNGbottles bottom based on image feedback[J]. Chinese Journal of Engineering Design, 2011, 18(5): 332-336.
链接本文:
https://www.zjujournals.com/gcsjxb/CN/
或
https://www.zjujournals.com/gcsjxb/CN/Y2011/V18/I5/332
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|