Please wait a minute...
工程设计学报
工程设计学报  2011, Vol. 18 Issue (3): 228-232    
机电产品工程设计     
特性列举法在空调设计中的研究与应用
 武艳芳, 王军锋
西南科技大学 制造科学与工程学院,四川 绵阳 621010
The research and application of attribute listing technique in air condition design
 WU  Yan-Fang, WANG  Jun-Feng
School of Manufacture Science and Engineering, Southwest University of Science and Technology, Mianyang 621010, China
 全文: PDF(1147 KB)   HTML
摘要： 特性列举法作为非常有效的创造技法之一,在目前的产品设计中并没有被深入发掘与利用．针对特性分析表面化的现象,分别对产品的3种特性进行了详细归类与深入分析,在名词属性中强调细节以及相关度,把形容词属性细分为性质属性与状态属性,动词属性分为使用功能与使用动作.以立式空调为对象,围绕其3种特性进行设计分析与设计展开,使设计在造型、结构、操作方式以及人机交互等方面的创新效率得到提高,同时明确了特性列举法的使用方法和使用重点,展现了该方法在产品创新设计中的有效性．
关键词： 特性列举法;  特性分析;  空调设计    
Abstract: The attribute listing technique, one of effective creativity techniques, is not utilized properly in the product design. In view of the phenomenon of analyzing attribute superficially, the three kinds of characteristics of product were analyzed deeply and classified in detail respectively. Details and relevance were emphasized in attributes of noun. An ulterior step was taken to divide the adjective into character attribute and state attribute, and verb attribute into use function and use action. Then design analysis and development surrounding the three kinds of characteristics with an object of vertical air conditioner were carried out. As a result, the technique enhances the design innovating efficiency in terms of form, construct, operation mode and human-machine interaction. The process illuminated how the attribute listing technique was used and what should be emphasized in design process. The result shows the validity of the new method in product creative design．
Key words: attribute listing technique    attribute analysis    air condition design
出版日期: 2011-06-28
:  TB 472  
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
武艳芳
王军锋

引用本文:

武艳芳, 王军锋. 特性列举法在空调设计中的研究与应用[J]. 工程设计学报, 2011, 18(3): 228-232.

WU Yan-Fang, WANG Jun-Feng. The research and application of attribute listing technique in air condition design[J]. Chinese Journal of Engineering Design, 2011, 18(3): 228-232.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2011/V18/I3/228

null
[1] 马彪,秦慧斌,冯毅,白旭日,辛佳毅. 旋转超声内圆磨削砂轮变幅器的设计与试验研究[J]. 工程设计学报, 2023, 30(1): 117-126.
[2] 王尧, 李淑君, 赵文玉, 孟文俊. 带式输送机用直线电机静动态特性试验与分析[J]. 工程设计学报, 2017, 24(3): 303-310.
[3] 晏海军,赵 亮,郭孔辉*,黄元毅. 基于剪切中心的扭转梁悬架侧倾运动分析[J]. 工程设计学报, 2014, 21(2): 147-153.
[4] 肖启明, 沈剑豪. 基于ADAMS的IHI摆式飞剪剪切机构特性分析与优化[J]. 工程设计学报, 2012, 19(5): 345-349.
[5] 陈旭东, 冯攀. 直流电机复合定位控制系统性能分析及系统优化[J]. 工程设计学报, 2012, 19(5): 391-399.