Please wait a minute...
工程设计学报
工程设计学报  2011, Vol. 18 Issue (2): 93-97    
工程设计理论、方法与技术     
某新型全板簧式连铸结晶器振动装置运动建模与分析
 唐进元1, 邸拴虎1, 蒋汉湘2
1.中南大学 现代复杂装备设计与极端制造教育部重点实验室,中南大学 机电工程学院,湖南 长沙 410083；
2.湖南涟源钢铁厂， 湖南 娄底 417000
Motion modeling and analysis of a leaf spring-type continuous casting mold vibration device
 TANG  Jin-Yuan1, DI  Shuan-Hu1, JIANG  Han-Xiang2
1.Key Laboratory of Modern Complex Equipment Design and Extreme Manufacturing of Ministry of Education, College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China;
2.Hunan Lianyuan Iron and Steel Works， Loudi 417000, China
 全文: PDF(1072 KB)   HTML
摘要： 研究某进口连铸机中的新型全板簧式结晶器振动装置运动特性,基于机构学、材料力学理论建立全板簧式结晶器振动装置的等效连杆和等效弹簧机构模型,使用Simulink仿真软件对2种等效机构进行运动学仿真.通过仿真结果的比较分析,验证了全板簧式结晶器振动装置机构模型建立与运动特性分析的正确性.研究工作为连铸机全板簧式结晶器振动装置的设计与分析提供了方法与技术积累.
关键词： 板簧;  连铸结晶器;  等效连杆;  等效弹簧;  运动分析    
Abstract: The motion characteristics of all spring-type vibration device for continuous casting mold was researched. The equivalent spring mechanism and equivalent linkage of all spring-type vibration devices for continuous casting mold were built based on theory of mechanism and mechanics of materials. Kinematics simulation of them were done with the Simulink simulation software. The comparative analysis of simulation results verifies modeling and movement characteristics analysis of the leaf spring-type mold vibrator body is valid, which provides a method and technology accumulation for the design and analysis of the vibration device of the whole spring-type continuous casting mold.
Key words: leaf spring    continuous casting    equivalent linkage    equivalent spring    analysis of motion
出版日期: 2011-04-28
:  TF 341.6  
基金资助:

国家自然科学基金资助项目(50875263)
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
唐进元
邸拴虎
蒋汉湘

引用本文:

唐进元, 邸拴虎, 蒋汉湘. 某新型全板簧式连铸结晶器振动装置运动建模与分析[J]. 工程设计学报, 2011, 18(2): 93-97.

TANG Jin-Yuan, DI Shuan-Hu, JIANG Han-Xiang. Motion modeling and analysis of a leaf spring-type continuous casting mold vibration device[J]. Chinese Journal of Engineering Design, 2011, 18(2): 93-97.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2011/V18/I2/93

[1] 束智伟，陈新元，邓江洪，詹小辉. 连铸结晶器加渣机布料区域矩形化补偿机构设计[J]. 工程设计学报, 2015, 22(5): 420-424.
[2] 刘军营, 刘宏昭, 吕传毅. 基于人工装配和易维护性的变截面板簧轧机设计[J]. 工程设计学报, 2004, 11(1): 23-26.