Please wait a minute...
工程设计学报
工程设计学报  2000, Vol. 7 Issue (4): 98-100    
工程设计理论、方法与技术     
三维表面测量的发展
 蒋向前1, L. Blunt2
1. 华中科技大学机械科学与工程学院仪器系, 湖北武汉430074;
2. University of Huddersfield, Huddersfield, UK
Advance in the Three-Dimensional Surface Metrology
 JIANG  Xiang-Qian1, L.  Blunt2
 全文: PDF(160 KB)   HTML
摘要： 在过去八年里，三维表面测量已经由一个新鲜事物发展成为评估工程表面特性的重要依据，并得到广泛应用。表面形貌对于表面特性，如摩擦、磨损、腐蚀、疲劳、涂层等，具有举足轻重的影响。为了充分分析和研究表面特性，表面测量与评估应按三维考虑。近年来，许多世界上著名的学术团体已致力于研究一个系列的三维表面粗糙度标准。作者在本文介绍近年来三维表面评定和标准化的进展。
关键词： 表面形貌;  三维评估;  表面计量    
Abstract: Over the past eig ht years the subject of 3D surface met rology has developed from something of a novelty to a posit ion where it has now become a crucial tool in the characterisat ion of engineering surfaces across a broad rang e of applicat ions. It is widely accepted that the nature of the topography of a surface has a signif icant influence on the efficiency and functional performance of the surface include wear, frict ion, lubrication, corrosion, fatigue, coat ing, paintability , etc. It is also increasingly being recognised that in order to fully study and control surface manufacture to enhance the above applicat ions, studies need to be carried out from a 3D perspect ive. A number of key research groups have been working in this area in an effort to produce def init ive 3D surface roughness standards. This paper reviews the most recent work in the field of 3D surface characterisat ion and out lines the development tow ards a 3D surface roughness standard.
Key words: surface topography    three-dimensional characterization    surface metrology
出版日期: 2000-12-15
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
蒋向前
L. Blunt

引用本文:

蒋向前, L. Blunt. 三维表面测量的发展[J]. 工程设计学报, 2000, 7(4): 98-100.

JIANG Xiang-Qian, L. Blunt. Advance in the Three-Dimensional Surface Metrology[J]. Chinese Journal of Engineering Design, 2000, 7(4): 98-100.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2000/V7/I4/98

[1] 骆燕燕, 潘晓松, 马旋, 武雄伟. 红外热成像技术在电连接器插拔磨损检测中的应用研究[J]. 工程设计学报, 2021, 28(5): 615-624.