Please wait a minute...
工程设计学报
工程设计学报  2000, Vol. 7 Issue (4): 101-104    
工程设计理论、方法与技术     
主动测量信息的智能化处理与控制
 简德
四川轻化工学院, 四川自贡643033
Intellectual Process and Control for Information of Active Measurement
 JIAN  De
Electromechanical Engineering Dept. , Sichuan Institute of Light Ind. & Chem. Tech. , Zigo ng 643033, China
 全文: PDF(162 KB)   HTML
摘要： 主动测量仪正朝着智能化和多参数测量的方向发展，传感器检测信号的滞后特性是产生动态误差的主要原因，本文提出了一种对被测信息进行智能化处理的方法，通过在线辨识传感器滞后时间常数Ｔｍ，再利用校正（补偿）的方法减少或消除滞后时间常数Ｔｍ的影响，从而减少或消除动态误差，实现测量与控制熔为一体、主动测量技术的自动化。
关键词： 主动测量;  处理与控制;  智能化    
Abstract: The act ive measurement instrument is developing tow ard the intellectual and multi-parameter measurement. T he measured signal is delayed by sensors, and it is also the main reason of dynamic errors.T he paper int roduces a method of integrated to process and cont rol intellectually for information
measured variable by sensors. The effects of the time consistent Tm delayed by sensor is compensated or corrected in measuring by. The delayed Tm can be diminished or eliminated. The information by sensors is being processed and cont rolled in measuring. It w ill be a method of measurement intellectually and automatically.
Key words: active measurement    process and control    intellectually and automatically
出版日期: 2000-12-15
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
简德

引用本文:

简德. 主动测量信息的智能化处理与控制[J]. 工程设计学报, 2000, 7(4): 101-104.

JIAN De. Intellectual Process and Control for Information of Active Measurement[J]. Chinese Journal of Engineering Design, 2000, 7(4): 101-104.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2000/V7/I4/101

[1] 王安邦, 孙文彬, 段国林. 基于数字孪生与深度学习技术的制造加工设备智能化方法研究[J]. 工程设计学报, 2019, 26(6): 666-674.