Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2004, Vol. 5 Issue (6): 634-643    DOI: 10.1631/jzus.2004.0634
Biotechnology & Food Science     
Comparative mapping of QTLs for Al tolerance in rice and identification of positional Al-induced genes
MAO Chuan-zao, YANG Ling, ZHENG Bing-song, WU Yun-rong, LIU Fei-yan, YI Ke-ke, WU Ping
State Key Laboratory of Plant Physiology and Biochemistry, College of Life Sciences, Zhejiang University, Hangzhou 310029, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  Aluminum (Al) toxicity is the major factor limiting crop productivity in acid soils. In this study, a recombinant inbreed line (RIL) population derived from a cross between an Al sensitive lowland indica rice variety IR1552 and an Al tolerant upland japonica rice variety Azucena, was used for mapping quantitative trait loci (QTLs) for Al tolerance. Three QTLs for relative root length (RRL) were detected on chromosome 1, 9, 12, respectively, and 1 QTL for root length under Al stress is identical on chromosome 1 after one week and two weeks stress. Comparison of QTLs on chromosome 1 from different studies indicated an identical interval between C86 and RZ801 with gene(s) for Al tolerance. This interval provides an important start point for isolating genes responsible for Al tolerance and understanding the genetic nature of Al tolerance in rice. Four Al induced ESTs located in this interval were screened by reverse Northern analysis and confirmed by Northern analysis. They would be candidate genes for the QTL.

Key wordsAluminum tolerance      Quantitative trait loci (QTL)      Expressed sequence tag (EST)      Gene      Rice (Oryza sativa L.)     
Received: 16 August 2003     
CLC:  Q943  
Cite this article:

MAO Chuan-zao, YANG Ling, ZHENG Bing-song, WU Yun-rong, LIU Fei-yan, YI Ke-ke, WU Ping. Comparative mapping of QTLs for Al tolerance in rice and identification of positional Al-induced genes. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2004, 5(6): 634-643.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.2004.0634     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2004/V5/I6/634

[1] Yao-bin Zhuo, Xue-yan Xiang, Xiao-jun Zhou, Hao-liang Lv, Guo-yang Teng. A method for the global optimization of the tooth contact pattern and transmission error of spiral bevel and hypoid gears[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2017, 18(5): 377-392.
[2] Long Yan, Qing-xiang Meng, Wei-ya Xu, Huan-ling Wang, Qiang Zhang, Jiu-chang Zhang, Ru-bin Wang. A numerical method for analyzing the permeability of heterogeneous geomaterials based on digital image processing[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2017, 18(2): 124-137.
[3] Hao Zheng, Yi-xiong Feng, Jian-rong Tan, Zhi-feng Zhang, Zi-xian Zhang. An integrated cognitive computing approach for systematic conceptual design[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(4): 286-294.
[4] Zhen-ya Li, Kui-hua Wang, Wen-bing Wu, Chin Jian Leo. Vertical vibration of a large diameter pile embedded in inhomogeneous soil based on the Rayleigh-Love rod theory[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(12): 974-988.
[5] Jin Cheng, Ming-yang Tang, Zhen-yu Liu, Jian-rong Tan. Direct reliability-based design optimization of uncertain structures with interval parameters[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(11): 841-854.
[6] Yong Wang, Ji-en Ma, You-tong Fang. Generation III pressurized water reactors and China’s nuclear power[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(11): 911-922.
[7] Wei Huang, Ming-hui Li, Feng Ding, Jun Liu. Supersonic mixing augmentation mechanism induced by a wall-mounted cavity configuration[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(1): 45-53.
[8] Zhi-feng Zhang, Yi-xiong Feng, Jian-rong Tan, Wei-qiang Jia, Guo-dong Yi. A novel approach for parallel disassembly design based on a hybrid fuzzy-time model[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(9): 724-736.
[9] Jiang-xin Yang, Jia-yan Guan, Xue-feng Ye, Bo Li, Yan-long Cao. Effects of geometric and spindle errors on the quality of end turning surface[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(5): 371-386.
[10] Kai Fang, Li-min Qiu, Xiao Jiang, Zhi-hua Gan, Ning-xiang Tong. Temperature inhomogeneity in high capacity pulse tube cryocoolers[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(11): 910-921.
[11] Zhuo-pei Li, Yan-long Jiang, Zhi-hua Gan, Li-min Qiu, Jie Chen. Performance of a precooled 4 K Stirling type high frequency pulse tube cryocooler with Gd2O2S[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(7): 508-516.
[12] Wen-qing Wu, Wei Wang, Zhi-bin Li, Pan Liu, Yong Wang. Application of generalized estimating equations for crash frequency modeling with temporal correlation[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(7): 529-539.
[13] Wen-feng Gan, Jian-zhong Fu, Hong-yao Shen, Zhi-wei Lin. A morphing machining strategy for artificial bone[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(3): 157-171.
[14] Yue-ping Xu, Chong Ma, Su-li Pan, Qian Zhu, Qi-hua Ran. Evaluation of a multi-site weather generator in simulating precipitation in the Qiantang River Basin, East China[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(3): 219-230.
[15] Jin Cheng, Gui-fang Duan, Zhen-yu Liu, Xiao-gang Li, Yi-xiong Feng, Xiao-hai Chen. Interval multiobjective optimization of structures based on radial basis function, interval analysis, and NSGA-II[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(10): 774-788.