Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2002, Vol. 3 Issue (2): 181-187    DOI: 10.1631/jzus.2002.0181
Civil Engineering     
Enhancement of durability of glass fiber-reinforced cement with PVA
QIAN Xiao-qian, ZHAN Shu-lin
Department of Civil Engineering, Zhejiang University, Hangzhou 310027, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  The main thrust of this research was to determine the effectiveness of polyvinyl alcohol (PVA) powder in enhancing the durability of short GFRC materials. Accelerated aging of the materials was achieved through low-pressure steam curing in a moist chamber. The strength and ductility of GFRC were measured by the direct tension test, which showed that incorporation of PVA powder into GFRC could improve its mechanical behaviour and turn it from brittle to ductile. To investigate the mechanism of the tensile strength enhancement, the fiber-matrix interface was examined by polarizing optical microscopy and scanning electron microscopy (SEM) with energy dispersive X-ray analysis (EDAX). It was found that PVA powder tended to migrate to the fiber-matrix interfacial zone and thus prevented the accumulation of calcium hydroxide in this area. PVA film around the fiber resulted in a more ductile interfacial microstructure and better bonding between fiber and matrix, which should be responsible for enhancing the tensile property and preventing the aging of GFRC. Furthermore, PVA powder reduced the microhardness and brittleness at the interface.

Key wordsGlass fiber-reinforced cement(GFRC)      Durability      Strength      Toughness      Polyvinyl alcohol(PVA)      Polymer      Interface     
Received: 06 September 2001     
CLC:  TB332  
Cite this article:

QIAN Xiao-qian, ZHAN Shu-lin. Enhancement of durability of glass fiber-reinforced cement with PVA. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2002, 3(2): 181-187.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.2002.0181     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2002/V3/I2/181

[1] Zi-qin Jiang, Yan-lin Guo, Ai-lin Zhang, Chao Dou, Cai-xia Zhang. Experimental study of the pinned double rectangular tube assembled buckling-restrained brace[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2017, 18(1): 20-32.
[2] Dong-Ming Yan, Hua-Wei Yin, Cheng-Lin Wu, Yan-Long Li, Jason Baird, Gen-Da Chen. Blast response of full-size concrete walls with chemically reactive enamel (CRE)-coated steel reinforcement[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(9): 689-701.
[3] Yan-jie Wei, Guo-yi Li. Membrane fouling behavior and microbial community succession in a submerged membrane bioreactor treating harbor oily wastewater[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(9): 745-757.
[4] He-dong Li, Shi-lang Xu. Rate dependence of ultra high toughness cementitious composite under direct tension[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(6): 417-426.
[5] Yin Cheng, Hao Yu, Bao-lin Zhu, Dao-xin Wei. Laboratory investigation of the strength development of alkali-activated slag-stabilized chloride saline soil[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(5): 389-398.
[6] Sr?an M. Bo?njak, Neboj?a B. Gnjatovi?, Sreten D. Savi?evi?, Milorad P. Panteli?, Ivan Lj. Milenovi?. Basic parameters of the static stability, loads and strength of the vital parts of a bucket wheel excavator’s slewing superstructure[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(5): 353-365.
[7] Guo-huan Bao, Yi Chen, Ji-en Ma, You-tong Fang, Liang Meng, Shu-min Zhao, Xin Wang, Jia-bin Liu. Microstructure and properties of cold drawing Cu-2.5% Fe-0.2% Cr and Cu-6% Fe alloys[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(8): 622-629.
[8] Jie Shan, Li Wang, Hao-jie Yu, Yu-lei Tai, Muhammad Akram. Synthesis and characterization of magnetic porous Fe3O4/poly(methylmethacrylate-co-divinylbenzene) microspheres and their use in removal of Rhodamine B[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(8): 669-679.
[9] Li-jun Hou, Zhi-yong Luan, Da Chen, Shi-lang Xu. Experimental study of the shear properties of reinforced ultra-high toughness cementitious composite beams[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(4): 251-264.
[10] Yuan-qing Wang, Xiao-wei Liao, Yuan-yuan Zhang, Yong-jiu Shi. Experimental study on the through-thickness properties of structural steel thick plate and its heat-affected zone at low temperatures[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(3): 217-228.
[11] Hui-mei Zhu, Pei-ming Wang, Guo-fang Zhang. Influence of vinyl acetate/ethylene copolymer powder on secondary efflorescence in Portland cement-based decorative mortar[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(2): 143-150.
[12] Zi-qin Jiang, Yan-lin Guo, Xiao-an Wang, Bin Huang. Design method of the pinned external integrated buckling-restrained braces with extended core. Part I: theoretical derivation[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(10): 781-792.
[13] Zi-qin Jiang, Yan-lin Guo, Jing-zhong Tong, Xing Yuan. Design method of the pinned external integrated buckling-restrained braces with extended core. Part II: finite element numerical verification[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(10): 793-804.
[14] Wei Wei, Ang Liu, Stephen C. Y. Lu, Thorsten Wuest. A multi-principle module identification method for product platform design[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(1): 1-10.
[15] Jing Xu, David J. Corr, Surendra P. Shah. Nanomechanical properties of C-S-H gel/cement grain interface by using nanoindentation and modulus mapping[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(1): 38-46.