| Mechanics and Mechanical Engineering |
|
|
|
|
| Load-carrying capacity and practical calculation method for hollow cylinder joints connected with H-shaped beams |
| Hui Wu, Bo-qing Gao, Qiang Chen |
| Finance and Economics of Zhejiang College, Hangzhou 310018, China; College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China |
|
|
|
Abstract A type of hollow cylinder joints connected with H-shaped beams is proposed for spatial structures. Based on von Mises yield criterion and perfect elasto-plasticity model, a series of finite element models of the joints is established, in which the effect of geometric nonlinearity is taken into account. Then mechanical behavior and load-carrying capacity of the joints were investigated, which were subjected to axial load, in- and out-plane bending moments, and their combinations. The results show that the ultimate loads of the joints are determined by the maximum displacement. Furthermore, the case of one joint connected with multiple beams was discussed. Experiments on a set of typical full-scale joints were conducted to understand the structural behavior and the failure mechanism of joint, and also to validate the finite element models. Finally, the practical calculation method was established through finite elements analysis (FEA) results and numerical fitting. The results show that the joints are more ductile and materially economical than welded hollow spherical joints, and the practical calculation method can provide a reference for direct design and the revision of relevant design codes.
|
|
Received: 10 August 2011
Published: 27 February 2012
|
|
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
