Please wait a minute...
Waste Disposal & Sustainable Energy
    
Biomass-glycerol briquettes are not necessarily mechanically stable and energetically effective
Bruno Rafael de Almeida Moreira1, Ronaldo da Silva Viana2, Samuel Dias Moreira2, Monique dos Santos Lima2, Anderson Chagas Magalhães2, Celso Tadao Miasaki2, José Claudio Caraschi3
1 Department of Phytosanitary, Rural Engineering and Soils, School of Engineering, S?o Paulo State University (Unesp), Ilha Solteira, S?o Paulo, Brazil  2 Department of Plant Production, College of Agricultural and Technological Sciences, S?o Paulo State University (Unesp), Dracena, Brazil  3 S?o Paulo State University (Unesp), Itapeva, S?o Paulo, Brazil
Biomass-glycerol briquettes are not necessarily mechanically stable and energetically effective
Bruno Rafael de Almeida Moreira1, Ronaldo da Silva Viana2, Samuel Dias Moreira2, Monique dos Santos Lima2, Anderson Chagas Magalh?es2, Celso Tadao Miasaki2, José Claudio Caraschi3
1 Department of Phytosanitary, Rural Engineering and Soils, School of Engineering, S?o Paulo State University (Unesp), Ilha Solteira, S?o Paulo, Brazil  Department of Plant Production, College of Agricultural and Technological Sciences, S?o Paulo State University (Unesp), Dracena, Brazil  S?o Paulo State University (Unesp), Itapeva, S?o Paulo, Brazil
 全文: PDF 
摘要: The re-use of glycerol from biodiesel industry as an alternative lubricant for making high-performance briquettes is usual. However, the technical performance of this agro-industrial residue is not consistent. This study outlines, accordingly, the real risk of introducing glycerol into the co-briquetting of highly caloric by-products of energy-crops. The production of hybrid briquettes consisted of pressing mixtures of residues of sugarcane and sorghum with the liquid additive at 10, 20, and 30 wt.% in bench-scale hydraulic piston presser machine. Irrespective of the blend, briquettes containing the supplement at the highest level as part of their composition ended up being much more hygroscopic (20.10%) and less energetic (3.15 GJ m?3). The explanation for the negative impact of glycerol on the thermomechanical behavior of briquettes would be overconcentration of additive capable of effectively defying compacting biomass. The degree of compaction during co-briquetting has likely gone down quickly with a maximizing level of glycerol. As long as the additive is not able to lubricate the feedstock suitably, improbability of biomass particles to successfully bond together to form themselves into mechanically stable and energetically effective briquettes is large. Besides lower density (273.80 kg m?3) and higher relaxation (22.75%), briquettes with glycerol at 30 wt.% generally were aesthetically unpleasing. Practically, these products resisted no longer to handling, transportation, and storage. They lost their shape easily during emptying and shifting them, thus, releasing larger quantities of biomass to the environment. Preliminary evidence of high-viscosity glycerol capable of limiting safe and effective production of high-performance briquettes for heating and power exists.
关键词: AdditiveAgro-residuesDensifcationBiosolidsWaste-to-energy    
Abstract: The re-use of glycerol from biodiesel industry as an alternative lubricant for making high-performance briquettes is usual. However, the technical performance of this agro-industrial residue is not consistent. This study outlines, accordingly, the real risk of introducing glycerol into the co-briquetting of highly caloric by-products of energy-crops. The production of hybrid briquettes consisted of pressing mixtures of residues of sugarcane and sorghum with the liquid additive at 10, 20, and 30 wt.% in bench-scale hydraulic piston presser machine. Irrespective of the blend, briquettes containing the supplement at the highest level as part of their composition ended up being much more hygroscopic (20.10%) and less energetic (3.15 GJ m?3). The explanation for the negative impact of glycerol on the thermomechanical behavior of briquettes would be overconcentration of additive capable of effectively defying compacting biomass. The degree of compaction during co-briquetting has likely gone down quickly with a maximizing level of glycerol. As long as the additive is not able to lubricate the feedstock suitably, improbability of biomass particles to successfully bond together to form themselves into mechanically stable and energetically effective briquettes is large. Besides lower density (273.80 kg m?3) and higher relaxation (22.75%), briquettes with glycerol at 30 wt.% generally were aesthetically unpleasing. Practically, these products resisted no longer to handling, transportation, and storage. They lost their shape easily during emptying and shifting them, thus, releasing larger quantities of biomass to the environment. Preliminary evidence of high-viscosity glycerol capable of limiting safe and effective production of high-performance briquettes for heating and power exists.
Key words: Additive    Agro-residues    Densifcation    Biosolids    Waste-to-energy
收稿日期: 2020-05-20
通讯作者: Bruno Rafael de Almeida Moreira     E-mail: bruno_rafael.m05@hotmail.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
Bruno Rafael de Almeida Moreira
Ronaldo da Silva Viana
Samuel Dias Moreira
Monique dos Santos Lima
Anderson Chagas Magalh?es
Celso Tadao Miasaki
José Claudio Caraschi

引用本文:

Bruno Rafael de Almeida Moreira, Ronaldo da Silva Viana, Samuel Dias Moreira, Monique dos Santos Lima, Anderson Chagas Magalhães, Celso Tadao Miasaki, José Claudio Caraschi. Biomass-glycerol briquettes are not necessarily mechanically stable and energetically effective. Waste Disposal & Sustainable Energy, 10.1007/s42768-020-00048-7.

链接本文:

http://www.zjujournals.com/wdse/CN/10.1007/s42768-020-00048-7        http://www.zjujournals.com/wdse/CN/Y0/V/I/1

No related articles found!