Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2002, Vol. 9 Issue (3): 168-170    DOI:
    
Design for hydrostatic bearing of slipper in water hydraulic axial piston pump
 CHEN  Yuan-Ling1, ZHOU  Hua2, YANG  Hua-Yong2
1．College of Mechanical Engineering，Guangxi University，Nanning 530004．China；
2．The State Key Laboratory of Fluid Power Transmision and Control，Zheiiang University，Hangzhou 310027，China
Download: HTML     PDF(132KB)
Export: BibTeX | EndNote (RIS)      

Abstract  The optimum water film thickness of slipper in water hydraulic axial piston pump were caculated and analyzed．The results show that balance style hydrostatic bearing design of slipper is not suitable to be used． Structure，structural param eter and m aterials of slipper in water hydraulic axial piston pump are analyzed and designed．

Key words： water hydraulic pump      hydraulic static bearing      slipper     
Published: 28 August 2002
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
CHEN Yuan-Ling
ZHOU Hua
YANG Hua-Yong
Cite this article:

CHEN Yuan-Ling, ZHOU Hua, YANG Hua-Yong. Design for hydrostatic bearing of slipper in water hydraulic axial piston pump. Chinese Journal of Engineering Design, 2002, 9(3): 168-170.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2002/V9/I3/168


纯水轴向柱塞泵滑履的静压支承设计

对纯水轴向柱塞泵滑履摩撩副的最佳水膜厚度进行了计算和分析．结果表明．纯水轴向柱塞泵滑履摩擦副不宜采用完全平衡型静压支承设计． 对纯水轴向柱塞泵滑履的结构参数和材料进行了设计分析．

关键词： 水压泵,  静压支承,  滑履 
[1] SHEN Ru-lin，PAN You-feng. Friction characteristic analysis of slipper pair in A11VO190 axial piston pumps[J]. Chinese Journal of Engineering Design, 2014, 21(1): 51-55.
[2] YU Zu-Yao, LI Zhuang-Yun, YANG Shu-Dong, NIE Song-Lin, TANG Qun-Guo. The problems and im provem ent of slipper socket in a water hydraulic piston pum p[J]. Chinese Journal of Engineering Design, 2002, 9(3): 116-118.