Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2000, Vol. 7 Issue (4): 111-113    DOI:
    
The Research on Parametric Design in Virtual 3D Environment
 HUANG  Chang-Lin1, HU  Shu-Gen1, ZHUO  Shou-Peng1, LI  Zhang-Sheng1, LI  Shu-Ying2
1. College of Mechanical & Energ y Engineering, Zhejiang Univ . Hangzhou 310027, China;
2. Daqing No. 9 Oil_extraction Faculty, Daqing 163853, China
Download: HTML     PDF(126KB)
Export: BibTeX | EndNote (RIS)      

Abstract  This paper provided a method of multiview establishment. According to the 3D data model,geomet ric const raints and projective const raints among views was established. By driving dimension, the paramet ric design of complex engineering drawings has been effectively realized.

Key words： multiview      dimension driven      parametric design     
Published: 15 December 2000
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
HUANG Chang-Lin
HU Shu-Gen
ZHUO Shou-Peng
LI Zhang-Sheng
LI Shu-Ying
Cite this article:

HUANG Chang-Lin, HU Shu-Gen, ZHUO Shou-Peng, LI Zhang-Sheng, LI Shu-Ying. The Research on Parametric Design in Virtual 3D Environment. Chinese Journal of Engineering Design, 2000, 7(4): 111-113.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2000/V7/I4/111


基于虚拟三维环境的参数化方法研究

提出了多视图投影信息的建立方法，根据系统内部特有的三维数据模型，建立了多视图的几何约束和投影的束模型。通过尺寸驱动，实现了复杂工程图的参数化设计。

关键词： 多视图,  尺寸驱动,  参数化 
[1] WEN Xia, REN Wen, LAI Sen-cai, ZENG Xian-jie. Design of control system of automatic hot stamping machine based on finite state machine model[J]. Chinese Journal of Engineering Design, 2020, 27(6): 771-780.
[2] LIU Jin-wen, REN Fang, XIE Jia-cheng, YANG Zhao-jian. Method of parametric design for scraper conveyor sprocket based on WebGL[J]. Chinese Journal of Engineering Design, 2019, 26(2): 237-244.
[3] LI Xiao-huo，ZHOU Yang，LIU Shi-jun ，DONG Wei-song，GUO Na，YANG Jie. Research on parametric design system for pick arrangement on drum shearer[J]. Chinese Journal of Engineering Design, 2014, 21(6): 550-554.
[4] ZHANG Bing-Wei, MA Xiao-Ming. Optimization design of parameters in feeding system driven by linear motor based on APDL[J]. Chinese Journal of Engineering Design, 2005, 12(2): 93-96.
[5] XIA Qi, CAI Min. Realization of Constraint-Driven Parametric Design Based on Hypergraph in AutoCAD[J]. Chinese Journal of Engineering Design, 2000, 7(4): 43-47.