Please wait a minute...
Chinese Journal of Engineering Design  2010, Vol. 17 Issue (5): 388-391    DOI:
    
Diagnosis strategy design based on extended multivalued dependency matrix
 WANG  Cheng-Gang1, SU  Xue-Jun1, YANG  Zhi-Yong2
1. Department of Basic Experiment, Naval Aeronautical and Astronautical University, Yantai 264001, China;
2. Unit 91370 of PLA, Fuzhou 350014, China
Download: HTML     PDF(965KB)
Export: BibTeX | EndNote (RIS)      

Abstract  In practical test, the output may be various when it fails. A great deal of information would be ignored if binary test was applied. Test precision and efficiency would also be decreased. Diagnosis strategy design algorithm based on extended multivalued dependency matrix was put forward. Multivalued dependency matrix was extended into binary dependency matrix, and then diagnosis strategy was designed based on AO* algorithm. Finally, the example proves that fault isolation precision is improved and the algorithm is effective. It offers an efficient algorithm to the diagnosis strategy design of uncertain system.

Key wordstestability analysis      diagnosis strategy      dependency matrix      multivalued test     
Published: 28 October 2010
Cite this article:

WANG Cheng-Gang, SU Xue-Jun, YANG Zhi-Yong. Diagnosis strategy design based on extended multivalued dependency matrix. Chinese Journal of Engineering Design, 2010, 17(5): 388-391.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2010/V17/I5/388


基于多值关联矩阵扩展的诊断策略设计

对于复杂系统,在实际测试中测试不通过的情况可能有多种,如果依然采用基于确定性关联矩阵的测试序列生成算法,将损失大量信息,导致测试精度和效率降低.提出了基于关联矩阵扩展的诊断策略设计方法,将多值关联矩阵扩展为二值关联矩阵,然后利用AO*算法得出诊断策略.实例验证表明,算法提高了故障隔离精度,为不确定系统的诊断策略设计提供一种高效算法.

关键词: 测试性分析,  诊断策略,  关联矩阵,  多值测试 
[1] WANG Cheng-Gang, WANG Xue-Wei, YANG Zhi-Yong, ZENG Ru-Wei. Study on correlation algorithm of failure mode rates in testability modeling[J]. Chinese Journal of Engineering Design, 2009, 16(4): 252-255.
[2] YANG Zhi-Yong, XU Ai-Qiang, NIU Shuang-Cheng. Model and analysis of system testability based on multi-signal model[J]. Chinese Journal of Engineering Design, 2007, 14(5): 364-368.