Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2015, Vol. 22 Issue (2): 137-142    DOI: 10.3785/j.issn. 1006-754X.2015.02.006
    
Availability analysis of the copperbelt tension leveler based on stochastic Petri nets
ZHOU Meng-shao， PAN Jun， CHEN Wen-hua， HE Qing-chuan
Zhejiang Province's Key Laboratory of Reliability Technology for Mechanical & Electrical Product，Zhejiang Sci-Tech University， Hangzhou 310018，China
Download: HTML     PDF(1318KB)
Export: BibTeX | EndNote (RIS)      

Abstract  In order to reasonably determine the checking cycle of the tension leveler for copper belt, simultaneously improve its productivity and its straightening precision,   the system failure mode were converted into a corresponding stochastic Petri nets and a stochastic Petri nets model of tension leveler failure mode was made according to the maintenance data of a company's  tension leveler for copper belt within nine months. Based on Markov process, the transient  probability for the stochastic Petri nets was worked out and the  steady-state  probability for tension leveler failure modes was got. The availability of tension leveler with different checking cycles was  calculated by analyzing the OR gate corresponded stochastic Petri net model. The reasonable checking cycle was determined  by comprehensively considering the availability and economic efficiency, which provided the basis for long-term cycle running of tension leveler.

Key words： tension leveler      stochastic Petri nets      steady-state probability      availability     
Received: 04 November 2014      Published: 28 April 2015
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

ZHOU Meng-shao， PAN Jun， CHEN Wen-hua， HE Qing-chuan. Availability analysis of the copperbelt tension leveler based on stochastic Petri nets. Chinese Journal of Engineering Design, 2015, 22(2): 137-142.

URL:

https://www.zjujournals.com/gcsjxb/10.3785/j.issn. 1006-754X.2015.02.006     OR     https://www.zjujournals.com/gcsjxb/Y2015/V22/I2/137


基于随机Petri网的铜带拉弯矫直机可用度分析

为了合理确定铜带拉弯矫直机的校验周期，提高其生产效率，确保其矫直精度，根据某铜板带公司拉弯矫直机9个月的维修数据，对拉弯矫直机的失效模式进行随机Petri网建模，将系统失效模式转换成相应的随机Petri网；基于马尔科夫过程对随机Petri网进行瞬态概率求解，并得到该拉弯矫直机失效模式的稳态概率；利用或门对应的随机Petri网模型分析，计算不同校验周期下拉弯矫直机的可用度.综合考虑设备可用度和经济效益，确定了合理的校验周期，为拉弯矫直机的长周期运行提供了依据．

关键词： 拉弯矫直机,  随机Petri网,  稳态概率,  可用度 
[1] YIN Ming-Ang, SUN Zhi-Li, YANG Li, WANG Jian. Transient reliability analysis for a deteriorating series repairable system[J]. Chinese Journal of Engineering Design, 2013, 20(4): 277-281.