|
|
|
| Modeling and application research of planar multiple-holes dimension |
| WANG You-li, WANG Xiao-hui, ZHANG Xue-liang |
| School of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China |
|
|
|
Abstract Aiming at the problem that traditional calculation of the multiple-holes' dimension needed to draw the dimensional chain and to judge whether the dimensional chain ring increased or decreased, and the process was complicated and easy to make mistakes, process dimension path graph was proposed to describe the sequences and reference of the process of each hole in planar multiple-holes. A full correlative dimension model was established based on the process dimension path graph, which could obtain all coordinate dimensions with vector feature. Dimension model was solved and tolerances of all coordinate dimension were obtained by using total differential equation. The drawback of available method is avoided using this proposed approach, and this approach is applied to program calculation of multiple-holes processing on machine center and numerically-controlled (NC) machine tool.
|
|
Received: 20 August 2015
Published: 28 February 2016
|
|
|
平面孔系尺寸的建模及其应用研究
针对传统的孔系尺寸计算需要绘制尺寸链图、判断增减环,以及存在过程复杂易出错等问题,提出用工序尺寸的路径图来描述平面孔系的各个孔的加工顺序和加工基准.基于路径图建立全相关的尺寸模型,求解得到具有矢量特征的坐标尺寸,并利用全微分法求解坐标尺寸的公差.避免了现有方法的缺陷,适用于加工中心及数控机床上孔系加工的计算机编程计算.
关键词：
孔系尺寸,
尺寸路径图,
尺寸模型,
尺寸和公差
|
|
| [1] 王伯平,朱建儒,李萍,等.简化平面尺寸链公差计算的方法[J].太原重型机械学院学报,1999,20(4):331-336. WANG Bo-ping,ZHU Jian-ru,LI Ping,et al.A computing method of simplifying tolerance in plane size chain[J].Journal of Taiyuan Heavy Machinery Institute,1999,20(4):331-336.[2] 石一民.平面孔系坐标尺寸精度的计算[J].浙江海洋学院学报(自然科学版),2002,21(2):191-194. SHI Yi-min.Calculation of coordinate's dimensional tolerance between the plane holes[J].Journal of Zhejiang Ocean University (Natural Science),2002,21(2):191-194.[3] 王世伟,谭建荣,张树有.平面尺寸链的设计和反求[J].中国机械工程,2003,14(2):97-100. WANG Shi-wei,TAN Jian-rong,ZHANG Shu-you.Design and reverse of plane dimensional chain[J].China Mechanical Engineering,2003,14(2):97-100.[4] XUE J,JI P.Process tolerance allocation in angular tolerance charting[J].International Journal of Production Research,2004,42(18):3929-3945.[5] 安虎平,孟刚.箱体平行孔系加工的坐标法原理及保证加工精度的方法[J].机械研究与应用,2006,19(3):67-69. An Hu-ping,MENG Gang.The principle of coordinate algorithm for machining parallel holes in box parts and the methods of keeping its accuracy[J].Mechanical Research & Application,2006,19(3):67-69.[6] GONZALEZ C F,ROSADO P.An alternative method to tolerance transfer for parts with 2D blueprint[J].International Journal of Production Research,2007,45(22):5309-5328.[7] 胡志敏,黄美发,钟艳如,等.基于尺寸链图形理论的公差计算方法[J].机械设计与制造,2007(12):106-108. HU Zhi-min,HUANG Mei-fa,ZHONG Yan-ru,et al.A tolerance calculation method based on the graphic of dimensional chain[J].Machinery Design & Manufacture,2007(12):106-108.[8] 吴如恩,王晓慧.尺寸式在平面孔系计算中的应用[J].机械工程与自动化,2009(2):181-184. WU Ru-en,WANG Xiao-hui.Application of dimensional formula in calculation of plane holes[J].Mechanical Engineering & Automation,2009(2):181-184.[9] 阎艳,余美琼,王国新,等.平面尺寸链公差分析算法研究[J].北京理工大学学报(自然科学版),2011,31 (7):799-802. YAN Yan,YU Mei-qiong,WANG Guo-xin,et al.Study on tolerance analysis algorithm of planar dimension chain[J].Journal of Beijing Institute of Technology (Natural Sciences Edition),2011,31 (7):799-802.[10] 杜官将.基于全微分法的平面尺寸链求解[J].南京工程学院学报(自然科学版),2007,5(4):23-28. DU Guan-jiang.Solution to planar dimension chains based on differentiation[J].Journal of Nanjing Institute of Technology (Natural Science Edition),2007,5(4):23-28. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
