Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2013, Vol. 20 Issue (5): 404-408    DOI:
    
The matrix iteration method for analysis of suspension cable based on segmental catenary theory
 QIN  Jian, XIA  Yong-Jun
China Electric Power Research Institute， Beijing 100192， China
Download: HTML     PDF(1158KB)
Export: BibTeX | EndNote (RIS)      

Abstract  A matrix iteration method is proposed based on the analytic method of segmental catenary for the suspension cable. The method was developed from the Newton iteration method for the nonlinear equations according to the analysis of different common methods. The tangent stiffness matrix of the iteration method was presented and the characteristics of the stiffness matrix were discussed. Then the iterative calculation process of suspension cables formfinding for the specific engineering problem was listed. The method offers significant improvements on accuracy， efficiency and calculation amount of the solution， which can meet the needs of practical engineering. The results of the Newton iteration method are compared with the numerical results in other literatures and the contrast verifies the reliability of this method. The method is suitable for the analysis of suspension bridges， cargo ropeways and other various types of cable structures.

Key words： suspension cable      segmental catenary      stiffness matrix      iteration      form-finding     
Published: 28 October 2013
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
QIN Jian
XIA Yong-Jun
Cite this article:

QIN Jian, XIA Yong-Jun. The matrix iteration method for analysis of suspension cable based on segmental catenary theory. Chinese Journal of Engineering Design, 2013, 20(5): 404-408.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2013/V20/I5/404


基于分段悬链线理论的悬索分析矩阵迭代法

通过分析现有悬索计算的主要方法，在分段悬链线解析计算方法的基础上，结合求解非线性方程组的牛顿迭代法，提出了适用于悬索分析的矩阵迭代方法.根据解析推导给出了悬索矩阵迭代法的切线刚度矩阵构造方法，分析了刚度矩阵的特点，针对特定的工程问题列出了悬索找形的迭代计算流程.该方法计算量小，效率高，计算精度能够满足实际工程需要.通过与其他文献的数值计算结果进行对比，验证了所研究方法的可靠性.该方法适用于悬索桥、货运索道等各类悬索结构的分析计算.

关键词： 悬索,  分段悬链线,  刚度矩阵,  迭代法,  找形 
[1] CHEN Jing, HOU Wei, ZHOU Yi-bo, WANG Xiu-zhuan, CHU Song-lin. Rapid research and development of complex components in aero-engine enabled by additive manufacturing[J]. Chinese Journal of Engineering Design, 2019, 26(2): 123-132.
[2] ZHANG Wen-tao，ZHANG You-peng，SU Hong-sheng，YANG Lei. Reliability analysis on ATP system of CTCS-3 based on dynamic fault tree[J]. Chinese Journal of Engineering Design, 2014, 21(1): 18-26.
[3] XIAO Hao, SONG Xiao-Lin, CAO Hao-Tian. Local path planning for autonomous vehicle collision avoidance based on dangerous repellant fields[J]. Chinese Journal of Engineering Design, 2012, 19(5): 379-384.
[4] HU Hao. New type Newton Iterative Method based on chaos mapping and planar crank-slide mechanism synthesis[J]. Chinese Journal of Engineering Design, 2006, 13(2): 114-115.
[5] LUO You-Xin, LI Da-Zhi. Finding all solutions to forward displacement analysis problem of
6-SPS parallel robot mechanism with chaos-iteration method[J]. Chinese Journal of Engineering Design, 2003, 10(2): 70-74.
[6] ZHANG Shu-Jie, GUAN Fu-Ling, ZHANG Jing-Jie. Design and Dynamic Analysis of Energy-loaded Joints for Deployable Space Structures[J]. Chinese Journal of Engineering Design, 2001, 8(2): 53-56.