Please wait a minute...
Chinese Journal of Engineering Design  2009, Vol. 16 Issue (2): 129-132    DOI:
    
Robust high precision rotational speed estimation method based on disturbance observer
LIU Qiang
College of Mechanical, Electronic and Automation, Huaqiao University, Quanzhou 362011, China
Download: HTML     PDF(1004KB)
Export: BibTeX | EndNote (RIS)      

Abstract  High precision measurement of dynamic rotational speed is the key problem for high performance motion control systems, especially for the low speed cases. For this problem, a novel real time estimation method of rotation speed was proposed. A disturbance observer was adopted to estimate the equivalent external disturbance and modeling error, and its output was introduced to the rotation speed observer as an input, which guaranteed convergence of estimation and enhanced the robustness. Finally simulation and experiments were conducted for a DC motor servo system. The results show this method is effective and robust, and it is insensitive to quantization noise.

Key wordsestimation      robust      servo system      observer      rotating speed     
Published: 28 April 2009
CLC:  TP273  
Cite this article:

LIU Qiang. Robust high precision rotational speed estimation method based on disturbance observer. Chinese Journal of Engineering Design, 2009, 16(2): 129-132.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2009/V16/I2/129


基于干扰观测器的鲁棒高精度转速估计方法

动态转速的高精度测量是高性能运动控制中的重要问题,尤其对于低速运动情况.针对该问题,提出一种新型实时转速估计方法,对系统外部扰动和建模误差,采用扰动观测器进行估计,再将其输出引入转速观测器,从而保证转速估计的收敛性,并增强其鲁棒性.以直流高精度伺服系统为例,进行了仿真和实验研究,结果表明该方法有效,鲁棒性强,且对角位置量化噪声不敏感.

关键词: 估计,  鲁棒,  伺服系统,  观测器,  转速 
[1] Yumin HE,Ying HAN,Jing ZHOU. Research on adaptive sliding mode control of tower crane based on improved fruit fly optimization algorithm[J]. Chinese Journal of Engineering Design, 2023, 30(3): 271-280.
[2] HU Kun, JIANG Qing-nan, JI Chen-guang, YANG Jian, LI Fei. Model reference sliding mode control of magnetic levitation system based on improved ESO[J]. Chinese Journal of Engineering Design, 2022, 29(1): 82-91.
[3] WANG Xin-yu, PING Xue-liang. Speed control method of mobile robot based on multi-sensor fusion information[J]. Chinese Journal of Engineering Design, 2021, 28(1): 63-71.
[4] HUANG Yu-peng, ZHANG Jia-bo, LEI Zheng-bao. Multi-objective robust design of new escape pipeline based on satisfaction function[J]. Chinese Journal of Engineering Design, 2019, 26(1): 20-28.
[5] HAN Ding, DING Jun. Investigation on PMSM speed regulation system based on TLESO/HLESO/RLESO[J]. Chinese Journal of Engineering Design, 2018, 25(1): 94-102.
[6] LI Qin, LIU Hai-dong, ZHANG Qi. Sliding model control scheme for virtual axis machine tool based on improved disturbance observer[J]. Chinese Journal of Engineering Design, 2016, 23(5): 501-505.
[7] ZHOU Yu-song, CHEN Xu-dong, CHENG Fang, FENG Pan. Robust controller design of DC servo motor uncertainty system[J]. Chinese Journal of Engineering Design, 2015, 22(6): 589-595.
[8] HU Jun-feng, HAO Ya-zhou, ZHENG Chang-hu. Robust optimization design of a precise micromanipulation stage for reducing temperature effect[J]. Chinese Journal of Engineering Design, 2015, 22(6): 581-588.
[9] WU Jian-jun, WAN Liang-qi, WU Shi-liang, NIE Peng-fei, WU Jia-wei. Robust optimization design of flexible hinge flexibility based on Taguchi method[J]. Chinese Journal of Engineering Design, 2015, 22(3): 224-229.
[10] LIU Hong-jun, BI Feng-rong, ZHANG Jian. Separation and identification of noise source at wheel loader's cab[J]. Chinese Journal of Engineering Design, 2015, 22(1): 66-71.
[11] WU Jiang. Parameter estimation method of mixed Weibull distribution in reliability analysis of aircraft[J]. Chinese Journal of Engineering Design, 2015, 22(1): 26-29.
[12] CHEN Bao,CHEN Qian,Christian Lohse,LEI Gang. Test verification and mechanical property estimation for rubber bushing of suspension based on "double methods-multiple equations"[J]. Chinese Journal of Engineering Design, 2014, 21(1): 43-50.
[13] ZHANG Bing, TANG Meng, LIAO Hai-Zhou. Anti-disturbance adaptive sliding mode control of PMSM based on load torque observer[J]. Chinese Journal of Engineering Design, 2013, 20(5): 427-433.
[14] LI Ling-Ling, GU Xun-Hua, LI Feng-Qiang, LI Zhi-Gang. Reliability assessment method based on GaAs laser performance degradation[J]. Chinese Journal of Engineering Design, 2012, 19(3): 166-169.
[15] CHEN Yong-Liang, LIU Shuang, HAN Yao, GU Pei-Hua. Fatigue life robust design of clamping disc springs fora shipbuilding hydraulic press head[J]. Chinese Journal of Engineering Design, 2012, 19(3): 161-165.