Please wait a minute...
Chinese Journal of Engineering Design  2008, Vol. 15 Issue (4): 268-270    DOI:
    
Design of optical interferometry elastohydrodynamic experimental apparatus under pure reciprocating
HUA Tong-shu1,2,CHEN Xiao-yang2
1. College of Mechanical and Energy Engineering, Jiangsu Polytechnic University, Changzhou 213016, China;
2. College of Mechatronics Engineering and Automation, Shanghai University, Shanghai 200072, China
Download: HTML     PDF(266KB)
Export: BibTeX | EndNote (RIS)      

Abstract  Reciprocation is one of the fundamental types of motions in mechanics.According to interferometric principle of wave optics, a set of optical interferometry experimental apparatus under reciprocation was developed to investigate line contact elastohydrodynamic lubrication (EHL) problem.The experimental research on the formation principle of elastohydrodynamic lubrication film under finite length line contact was carried out. The preliminary experiment indicates that the new test rig can work under reciprocating motion and measure the figure and changing situation of the above films.

Key wordsreciprocating      line contact      elastohydrodynamic      optical interferometry      experimental apparatus     
Published: 28 August 2008
CLC:  TH133.3  
Cite this article:

HUA Tong-shu,CHEN Xiao-yang. Design of optical interferometry elastohydrodynamic experimental apparatus under pure reciprocating. Chinese Journal of Engineering Design, 2008, 15(4): 268-270.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2008/V15/I4/268


摆动工况下光干涉弹流润滑试验机的设计

摆动是较为典型的机械运动方式,为了揭示线接触副在此运动状态下的弹流润滑问题,根据波动光学干涉原理,研发出一套摆动工况下的光干涉实验装置,开展有限长线接触弹流润滑油膜成膜机理的实验研究.初步实验表明,该实验台可以有效地工作在摆动工况下,测量滚子类线接触弹流润滑接触表面的油膜形状及其变化情况.

关键词: 摆动,  线接触,  弹流,  光干涉,  实验装置 
[1] Yi ZHANG,Siyang XIONG,Sipeng ZHONG,Zijie XIONG,Qiang YANG. Effect of sealing surface wear on the performance of V-shaped combined sealing ring[J]. Chinese Journal of Engineering Design, 2023, 30(2): 237-243.
[2] WEI Qi, KUANG Yu-chun. Analysis of the influence of crank-link ratio on flow unevenness and piston inertia force of reciprocating pump[J]. Chinese Journal of Engineering Design, 2021, 28(2): 190-194.
[3] ZOU Yu-jing,CHANG De-gong. Friction coefficient analysis of involute spur gears with consideration of dynamic load and surface roughness[J]. Chinese Journal of Engineering Design, 2014, 21(3): 285-291.
[4] DI Li-Ming,ZHAN Chang-Shu,XIA Huai-Cheng. Research on multiple-stroke working mode of reciprocating piston engine[J]. Chinese Journal of Engineering Design, 2007, 14(2): 126-129.
[5] CHEN Guo-Ping, WEN Qing-Ming. Research on reciprocating cleaner of rolling mill[J]. Chinese Journal of Engineering Design, 2002, 9(1): 41-43.